Awesome

This is my fork & playground.

Currently, it's used as an auto builder (by utilizing GitHub Actions) for some custom board configs. Pull requests welcome. Feel free to open an issue to report any bugs.

See the release page for downloading the auto-built firmware.

The changes of this branch are:

• build.yml, only build firmware for not officially supported configs in popular FPV combinations (Save energy. ![The Girl: How dare you.gif])
• Custom board configs
• Replaced kernel source link for 3516/7205, as 8812eu driver needs WIRELESS_EXT enabled in kernel source code
• Using my Wi-Fi driver packages for FPV (experimental changes warning). Currently including RTL8731BU/RTL8733BU, RTL8812CU/RTL8822CU(Unlock txpower not allowed -- will cause hang), and RTL8192EU(2.4G only).
• 5/10/20/40/80 MHz bandwidth support; 5MHz supported by 8733bu & 8812cu, 10MHz supported by 8812eu, 8733bu & 8812cu, 40MHz uses HT40- (default in some Android App's driver). 80MHz only works on VHT mode so Wi-Fi 5 adapters are required.

Note 1: ALL HI3516/GK7205 BUILDS NEEDS A 16M-Byte NOR FLASH.

Note 2: The source code is manually synced with OpenIPC/firmware so it may not be the latest. Let me know if there are critical changes in mainline -- you can PM me in the Telegram group (OpenIPC FPV Users, @libc0607) or the Chinese QQ group (904031209) so that I can sync the code here.

Note 3: The firmware on the release page is not tested on any real board. It's auto-built. Use with caution, you know the risks, and I won't be responsible for them.

备注 4: 你的浏览器应该有翻译功能，我就不写中文了