Awesome

Current status

Tested to work on Monterey, Ventura and Sonoma.

The 3.5mm audio jack does not work, as the device uses ES8336 audio chipset and likely not supported. However, HDMI and USB audio both works.

I do not have the tools to test USB C port display out

I have not thoroughly test it for problems, so please create issue if you find any problem.

I am an amateur in hackintoshing, so I may not be able to help!

Feel free to submit pull requests to help improve this project!

The EFI may work in BeeLink SEi8, but I cannot support it. Please go to https://github.com/daliansky/Beelink-SEI8-Hackintosh

You may also take a look at the guide for Intel NUC 8 for reference: https://github.com/zearp/Nucintosh

BIOS settings
- Secure Boot need to be disabled
- CFG Lock need not be disabled
- VT-d need not be disabled
Create installation USB
Download and copy EFI folder to installation USB
Edit the following items in config.plist: https://dortania.github.io/OpenCore-Install-Guide/config.plist/coffee-lake.html#platforminfo
- PlatformInfo -> Generic -> MLB
- PlatformInfo -> Generic -> ROM
- PlatformInfo -> Generic -> SystemSerialNumber
- PlatformInfo -> Generic -> SystemUUID
Boot the USB and install
Copy EFI to hard drive

It has very similar spec to Intel NUC 8, which is very hackintosh-able and there are repos for EFI of that device.

However, GMK NUCBOX2 is cheaper than it, making it a good choice for those who want a cheap hackintosh machine.

CPU: Intel Core i5 8279U

GPU: Intel Iris Plus 655

RAM: 2 x 8GB 2666mHz DDR4

Storage: AGI High Performance SSD AI198 M.2 PCIe 1TB

Audio Codec: Intel SST

Ethernet Card: Realtek 8111

Wifi/BT Card: Intel Dual Band Wireless-AC 7265