Awesome

Pyped: command that pipes data from bash to Python, and vice-versa

WARNING: since the last version the command line name "py" has been renamed to "pyp" to avoid conflict with the new tool in the Python stdlib named "py". It means pyped is now incompatible with the "Python Power at the Prompt" project sharing the same name and goals.

Pyped is a command-line tool that let you process another command output with a Python one-liner like Perl or AWK.

Ever wish you could do this:

$ ps aux | pyp "line = x.split()" "print(line[1], line[-1])" | grep worker
18921 [kworker/1:2]
22489 [kworker/3:0]
24065 [kworker/3:3]
24869 [kworker/u:3]
25463 [kworker/u:1]
25511 [kworker/2:2]
25720 [kworker/0:2]
26343 [kworker/0:1]
26491 [kworker/2:0]
26569 [kworker/1:0]
26592 [kworker/u:0]
26861 worker

Or this:

$ ls -1 | pyp -i "for x in Counter(path(x.split()[-1]).ext for x in l).items(): print(x)"
(u'.sh', 2)
('', 3)
(u'.sh~', 3)
(u'.py', 4)
(u'.desktop', 1)

Pyped make that possible by giving you the pyp commande.

How to install ?

Just type:

pip install pyped

It works with Python 2.7 and 3.4, although it uses future imports to enforce a lot of 3.X stuff such as unicode literals and the print() function.

How to use ?

Usage:

$ pyp "any python one-liner"
$ shell_command | pyp [options] "any python one-liner" [another python one-liner] [| another_shell_function]

In the second example, you pipe data to pyped. In that case, you python code will have access to the variable x, which will be a line from stdin converted to unicode (with no ending '\n'). Each line from stdin will be stuffed to x one by one, and your python code will be executed for each new value for x

You'll also have access to the variable i, an integer incremented at each call of you Python statement, starting from 0.

Your code MUST print something, if you wish something to appear.

Without Pyped:

$ echo "test"
test
$ ls /etc | tail
wordpress
wpa_supplicant
X11
xdg
xml
xul-ext
xulrunner-1.9.2
y-ppa-manager.conf
zsh
zsh_command_not_found

With Pyped:

$ pyp "print('test')"
test
$ ls /etc/ | tail -n 4 | pyp "print('%s %s' % (i, x.upper()))"
0 WPA_SUPPLICANT
1 X11
2 XDG
3 XML

You can even make long one time scripts:

$ ps aux | pyp "
if i > 0:
    values = x.split()
    user, pid = values[:2]
    command = ' '.join(values[10:])
    if user != 'root':
        print('\"%s\";\"%s\";\"%s\"' % (user.upper(), pid, command))
"
"SYSLOG";"741";"rsyslogd -c5"
"AVAHI";"788";"avahi-daemon: running"
"AVAHI";"791";"avahi-daemon: chroot helper"
"DAEMON";"1271";"atd"
"WHOOPSIE";"1289";"whoopsie"
"MYSQL";"1304";"/usr/sbin/mysqld"
"ME";"1699";"ps aux"
"ME";"2167";"-"
"TIMIDITY";"2202";"/usr/bin/timidity -Os -iAD"
"RTKIT";"2594";"/usr/lib/rtkit/rtkit-daemon"
"ME";"2763";"/usr/bin/gnome-keyring-daemon --daemonize --login"
"ME";"2774";"gnome-session --session=ubuntu"

Options

-i

If you pass -i, then x will not exists, but l will contain an iterable for which each call to next() return a line of stdin, converted to unicode.

It is mainly used for processing you wish to apply to the whole stdin such as joining or for global counters.

E.G:

$ ls /etc/ | tail -n 4 | pyp -i "print('-'.join(i.strip() for i in l))"
wpa_supplicant-X11-xdg-xml

-p

Automatically print the result of your Python expression.

E.G:

$ ls /etc/ | tail -n 4 | pyp -p 'x.upper()'
WPA_SUPPLICANT
X11
XDG
XML

If your expression returns None, the line is not printed.

WARNING : other flags usually accept Python statement (if, for, etc). If you use this flag, most of them will now only accect expressions (stuff you can pass directly to the print function).

-s

Split input using a Python regex. Result will be stored in "f". 'x', 'i' and 'stdin' are still available.

E.G:

$ echo "a   b c" | pyp -s "\s+" "print(f)"
[u'a', u'b', u'c']
$ echo "a-b-c" | pyp -s "-" "print(f)" "print(x)"
[u'a', u'b', u'c']
a-b-c

-f

Filter input using a Python expression (like grep, but on any python condition).

E.G::

$ cat /etc/fstab | pyp -f 'len(x) < 45 and "/" in x'
# / was on /dev/sda7 during installation
# swap was on /dev/sda6 during installation

If an exception is raised in quiet mode, the line is skiped.

WARNING : other flags accept Python statement (if, for, etc). This flags only accept expressions (stuff you can pass directly a if keyword).

-b

Pass a statement you wish to run BEFORE reading from stdin. Mainly used for imports.

E.G:

$ ls /etc/ | tail -n 4 | pyp "print(pickle.dumps(x))" -b "import pickle"
Vwordpress
p0
.
Vwpa_supplicant
p0
.
VX11

This is executed only once.

-a

Pass a statement you wish to run AFTER reading all stdin.

Is is executed in a finally clause, so it runs even if your code fails before.

Mainly used for counters and cleanup.

E.G:

$ ls /etc/ | tail -n 4 | pyp "x" -a 'print(i)'
wpa_supplicant
X11
xdg
xml
3

This is executed only once.

-q

Quietly ignore exceptions.

--full

Pass the entire content of the standard input in a "stdin" variable.

E.G:

$ cat /etc/fstab | pyp  "print(len(x))"
45
1
62
74
63
1
70
40
93
43
91
118

$ cat /etc/fstab | pyp --full  "print(len(stdin))"
713

--stdin-charset

Force the charset to decode input. Otherwise, we try to detect it, and fallback on UTF-8 if it fails.

E.G:

$ ls /etc/ | tail -n 4 | pyp "x.split('-')[0]" --stdin-charset ascii
wpa_supplicant
X11
xdg
xml

Be careful, that could fail miserably if you choose a bad charset:

$ ls /etc/ | tail -n 4 | pyp "é" --stdin-charset ascii
'ascii' codec can't decode byte 0xc3 in position 0: ordinal not in range(128)

--rstrip

Each line from stdin has .rstrip('\n') applied to it before being passed to your code so you can call print() without thinking about it.

However, if you do wish to keep the line breaks, use --rstrip=''.

The usual result:

$ ls /etc/ | pyp -i "for x in list(l)[:5]: print(x)"
total 2,5M
drwxr-xr-x 204 root    root     12K déc.   1 16:40 .
drwxr-xr-x  26 root    root    4,0K nov.  12 07:37 ..
drwxr-xr-x   3 root    root    4,0K mars   7  2013 acpi
-rw-r--r--   1 root    root    3,0K avril 26  2011 adduser.conf

The result if you supress right stripping:

$ ls /etc/ | pyp -i "for x in list(l)[:5]: print(x)" --rstrip=''
total 2,5M

drwxr-xr-x 204 root    root     12K déc.   1 16:40 .

drwxr-xr-x  26 root    root    4,0K nov.  12 07:37 ..

drwxr-xr-x   3 root    root    4,0K mars   7  2013 acpi

-rw-r--r--   1 root    root    3,0K avril 26  2011 adduser.conf

--json

Parse stdin as JSON, and make the whole thing accessible in a "j" variable.

$ echo '[{"foo": "bar"}]' | pyp -j "print(j[0]['foo'])"
bar

Imports

Before doing any processing, we import several modules so they are immediatly available in your Python code:

import sys
import os
import re
import json
import base64
import calendar
import csv
import itertools
import random
import hashlib
import tempfile
import argparse
import random
import math

from itertools import *
from uuid import uuid4
from datetime import datetime, timedelta
from collections import Counter, OrderedDict

We also import these 4 third party libraries:

import arrow # better datetime
import requests # better http request

from minibelt import * # better itertools
from path import path # better path handling

They should have been installed by setuptools automatically, so if you use pip or easy_install, you are good to go.

If you didn't, and you don't have them installed, these imports will be ignored.

While Pyped is based on Python 2.7, it also imports some backported features from Python 3:e

from __future__ import (unicode_literals, absolute_import,
                        print_function, division)

This means print is a function, any string is unicode by default and does not need to be prefixed by u, division doesn't truncate and imports are absolute (but you can use the relative import syntax).

This way, pyped run on Python 3.