Awesome

Neovim Projector

Extensible code-runner/project-configurator.

Manage Tasks, Databases, Tests and Debug Configurations in One Place!

Overview

Projector is a tool which manages configuration objects (lua key-value tables - see here), which have a different meaning depening on the used output.

These configuration objects are loaded from different sources using loaders (see here), preprocessed by output builders and later used as outputs.

For example, configuration object is loaded from tasks.json file, task output builder preprocessor finds it compatible with it's output, so the task is visible in the UI. When the user selects to run this task, it is sent to task output.

Here approximately how this looks like:

    LOADERS                       OUTPUT BUILDERS

┌──────────────┐                        ┌──────────┐
│              │                        │          │
│ tasks.json   ├── 1 ────┐   ┌── has ───► task     ──┐
│              │ object  │   │ command? │          │ │
└──────────────┘         │   │          └──────────┘ │
                         │   │                       │
┌──────────────┐         │   │          ┌──────────┐ │
│              │         │   │          │          │ │
│ launch.json  ├── 3 ────┼───┼── can ──►│ debug    ──┼─► - ... (task)  
│              │ objects │   │  debug?  │          │ │   - ... (task|debug)
└──────────────┘         │   │          └──────────┘ │   - ... (database) ───► run
                         │   │                       │   - ... (task)           │
┌──────────────┐         │   │          ┌──────────┐ │                          │
│              │         │   │          │          │ │                          │
│ package.json ├── 2 ────┘   └── has ───► database ──┘                          ▼
│              │ objects     connection?│          │                     open dadbod ui
└──────────────┘                        └──────────┘

Installation

packer.nvim

use {
  "kndndrj/nvim-projector",
  requires = {
    -- required:
    "MunifTanjim/nui.nvim",
    -- optional extensions:
    "kndndrj/projector-neotest",
    -- dependencies of extensions:
    "nvim-neotest/neotest",
  },
  config = function()
    require("projector").setup(--[[optional config]])
  end,
}

lazy.nvim

{
  "kndndrj/nvim-projector",
  dependencies = {
    -- required:
    "MunifTanjim/nui.nvim",
    -- optional extensions:
    "kndndrj/projector-neotest",
    -- dependencies of extensions:
    "nvim-neotest/neotest",
  },
  config = function()
    require("projector").setup(--[[optional config]])
  end,
},

Setup

You can pass an optional table parameter to setup() function.

Here are the defaults:

config.lua

Usage

• Call the setup() function with an optional config parameter.

• Map these functions to keys of your choice:

  require"projector".continue()
  require"projector".toggle()
  require"projector".next()
  require"projector".previous()
  require"projector".restart()
  require"projector".kill()
  

• continue function is a direct replacement for nvim-dap and the main entrypoint to this plugin. So replace this:

  require"dap".continue()
  

  With this:

  require"projector".continue()
  

Configuration Object

The configuration object is a base unit of projector and it is nothing more than a simple hashmap.

A few fields have a special or global meaning (see snippet below), other than that, the meaning of fields is determined by the outputs.

For example: dadbod output doesn't care about command, port or env fields, but dap output does. This means that a configuration object with just the forementioned fields can be ran in dap output mode, but not in dadbod output mode (additional ref with :h projector.ref.task).

{
  -- These have special "global" meaning:
  id = "specific.task.id" -- ID is optional, but can be useful for specifying dependencies
  name = "Task", -- task's name
  dependencies = {  -- list of task ids to run before this one
    "setup.some.stuff",
    "setup.some.more.stuff"
  },
  after = "cleanup.task.id", -- task id to run after this one is finished
  evaluate = "task", -- run this config in "task" mode immedialtely after loading
  children = { -- nesting is also supported
    {
      name = "...",
      -- ... other config fields
    },
 }
}

Loaders

Loaders provide configuration objects from various sources. You can control which sources to use using the setup function:

require("projector").setup {
  loaders = {
    require("projector.loaders").BuiltinLoader:new()
    require("projector.loaders").DapLoader:new( ),
    -- ...
  },
}

There are a few loaders that are built-in:

• BuiltinLoader - loads configs from projector.json. The tasks can also be specifies in lua config.
• DapLoader - loads dap.configurations

If you want to create your own loader, implement the Loader interface (:h projector.ref.loaders).

Outputs and Output Builders

Outputs are modules that recieve a configuration object and run it's commands (show the output on screen). Output Builders on the other hand provide a means to build those outputs. As a user, you only need to care about providing output builders in the config:

require("projector").setup {
  outputs = {
    require("projector.outputs").TaskOutputBuilder:new(),
    require("projector.outputs").DadbodOutputBuilder:new(),
    require("projector.outputs").DapOutputBuilder:new(),
  },
}

You can pick form a few built-ins...

• TaskOutputBuilder builds a terminal output, which runs a shell command
• DapOutputBuilder builds an output which runs nvim-dap
• DadbodOutputBuilder picks database and query fields from all loaded configs and provieds a single task that opens vim-dadbod-ui

Or you can choose to implement your own (:h projector.ref.outputs)

Extensions

Here is a list of available extensions, which provide different outputs and loaders:

• neotest output.
• vscode launch.json and tasks.json loaders.
• intellij .idea workspace folder loader.
• dbee - provides a DadbodOutput replacement.