Home

Awesome

micropython-mcp2515

Micropython MCP2515 driver, porting from Arduino MCP2515 CAN interface library

Getting Started

This MCP2515 driver could be used for any MCU or platform supported by Micropython, such as Pyboard, ESP32, ESP8286, etc.

"""
Following SPI drivers are supported, please adjust by your hardware
from .src import SPIESP8286 as SPI
from .src import SPIESP32 as SPI


The CAN driver can be initialized with default baudrate 10MHz
CAN(SPI(cs=YOUR_SPI_CS_PIN)) or
CAN(SPI(cs=YOUR_SPI_CS_PIN, baudrate=YOUR_DESIRED_BAUDRATE))

And here is an example to set filter for extended frame with ID 0x12345678
can.setFilter(RXF.RXF0, True, 0x12345678 | CAN_EFF_FLAG)
can.setFilterMask(MASK.MASK0, True, 0x1FFFFFFF | CAN_EFF_FLAG)
can.setFilterMask(MASK.MASK1, True, 0x1FFFFFFF | CAN_EFF_FLAG)
"""
import time

from src import (
    CAN,
    CAN_CLOCK,
    CAN_EFF_FLAG,
    CAN_ERR_FLAG,
    CAN_RTR_FLAG,
    CAN_SPEED,
    ERROR,
)
from src import SPIESP32 as SPI
from src import CANFrame


def main():
    # Initialization
    can = CAN(SPI(cs=23))

    # Configuration
    if can.reset() != ERROR.ERROR_OK:
        print("Can not reset for MCP2515")
        return
    if can.setBitrate(CAN_SPEED.CAN_500KBPS, CAN_CLOCK.MCP_8MHZ) != ERROR.ERROR_OK:
        print("Can not set bitrate for MCP2515")
        return
    if can.setNormalMode() != ERROR.ERROR_OK:
        print("Can not set normal mode for MCP2515")
        return

    # Prepare frames
    data = b"\x12\x34\x56\x78\x9A\xBC\xDE\xF0"
    sff_frame = CANFrame(can_id=0x7FF, data=data)
    sff_none_data_frame = CANFrame(can_id=0x7FF)
    err_frame = CANFrame(can_id=0x7FF | CAN_ERR_FLAG, data=data)
    eff_frame = CANFrame(can_id=0x12345678 | CAN_EFF_FLAG, data=data)
    eff_none_data_frame = CANFrame(can_id=0x12345678 | CAN_EFF_FLAG)
    rtr_frame = CANFrame(can_id=0x7FF | CAN_RTR_FLAG)
    rtr_with_eid_frame = CANFrame(can_id=0x12345678 | CAN_RTR_FLAG | CAN_EFF_FLAG)
    rtr_with_data_frame = CANFrame(can_id=0x7FF | CAN_RTR_FLAG, data=data)
    frames = [
        sff_frame,
        sff_none_data_frame,
        err_frame,
        eff_frame,
        eff_none_data_frame,
        rtr_frame,
        rtr_with_eid_frame,
        rtr_with_data_frame,
    ]

    # Read all the time and send message in each second
    end_time, n = time.ticks_add(time.ticks_ms(), 1000), -1
    while True:
        error, iframe = can.readMessage()
        if error == ERROR.ERROR_OK:
            print("RX  {}".format(iframe))

        if time.ticks_diff(time.ticks_ms(), end_time) >= 0:
            end_time = time.ticks_add(time.ticks_ms(), 1000)
            n += 1
            n %= len(frames)

            error = can.sendMessage(frames[n])
            if error == ERROR.ERROR_OK:
                print("TX  {}".format(frames[n]))
            else:
                print("TX failed with error code {}".format(error))


if __name__ == "__main__":
    try:
        main()
    except KeyboardInterrupt:
        pass

Limitation