Awesome

Introduction

A small software 3D rendering program on the STM32F429 Discovery evaluation board. Based on Andreas Mantler's work.

Build Instructions

Because the STM32F429 Discovery is relatively new, we would recommend to prepare several recent utilities:

• OpenOCD

    git clone git://git.code.sf.net/p/openocd/code openocd
    cd openocd
    ./bootstrap
    ./configure --prefix=/usr/local \
        --enable-stlink
    echo -e "all:\ninstall:" > doc/Makefile
    make
    sudo make install

• GNU Tools for ARM Embedded Processors

    apt-get install gcc-arm-none-eabi

If you encounter the problems of missing packages, try to execute the following commands in advance:

    sudo add-apt-repository ppa:terry.guo/gcc-arm-embedded
    sudo apt-get update

In addition, you need to download STM32F429I-Discovery firmware and extract it to the toplevel directory where stm32f429-r3d exists.

    unzip stsw-stm32138.zip

Then, get the latest source from GitHub and then build:

    git clone https://github.com/jserv/stm32f429-r3d
    cd stm32f429-r3d
    make

Please confirm STM32F429 Discovery is properly connected to USB, and let's flash the device:

    make flash

Be patient when OpenOCD is flashing.