Home

Awesome

Actions License Go Report Card Godoc Releases

Retry

⏰ Rerun a command until it eventually succeeds, or doesn't!

Installation

Prebuilt binaries for several architectures can be found attached to any of the available releases.

For Linux:

wget https://github.com/joshdk/retry/releases/download/v1.4.0/retry-linux-amd64.tar.gz
tar -xf retry-linux-amd64.tar.gz
sudo install retry /usr/bin/retry

For Mac:

brew tap joshdk/tap
brew install joshdk/tap/retry

A development version can also be built directly from this repository. Requires that you already have a functional Go toolchain installed.

go install github.com/joshdk/retry@master

Motivations

I kept seeing folks write bespoke code to retry commands that were either flaky, or took time to succeed. This usually manifested as some sort of loop in bash, with a counter, and a return code check.

Searching around, this doesn't seem to be an isolated problem, which has an even larger number of bespoke solutions. Take for example this handful of Stack Overflow threads:

These are perfectly legitimate questions, with many reasonable answers. The downside is that the solutions were usually specific to the question asked, and not always applicable to the broader problem.

This tool is an attempt to solve that broader problem. ⏰

Usage

Help!

Usage: retry [flags] command|url
  -attempts int
        maximum number of attempts (default 3)
  -backoff
        use exponential backoff when sleeping
  -consecutive int
        required number of back to back successes
  -delay duration
        initial delay period before tasks are run
  -invert
        wait for task to fail rather than succeed
  -jitter duration
        time range randomly added to sleep
  -max-time duration
        maximum total time (default 1m0s)
  -quiet
        silence all output
  -sleep duration
        time to sleep between attempts (default 5s)
  -task-time duration
        maximum time for a single attempt
  -version
        print the version "v1.4.0" and exit

Running a command

Retry will run a given command repeatedly, until it is deemed an overall success of failure. The conditions and limits for what determine success/failure can be tuned with command line flags.

As a special case, if a URL is given, retry will GET that URL and check for a 200 OK to be returned.

Limit attempts

The -attempts flag limits the maximum number of times a command can be run. A value of 0 allows unlimited attempts.

Run cat kubeconfig.yml a maximum of 3 times, or less if the command succeeds earlier:

$ retry -attempts=3 cat kubeconfig.yml

Limit task time

The -task-time flag limits the maximum time that a command can run for. A value of 0 allows unlimited time.

Run wget https://example.com, but limit the command to only run for a maximum of 15 seconds.

$ retry -task-time=15s wget https://example.com

Limit overall time

The -max-time flag limits the maximum total time that retry will run for. A value of 0 allows unlimited time.

GET https://example.com repeatedly, but stop running after a total of 60 seconds.

$ retry -max-time=60s https://example.com

Initial delay

The -delay flag inserts a one-time delay before initial starting to run commands.

Run wget https://example.com, but start only after initially sleeping for 15 seconds.

$ retry -delay=15s wget https://example.com

Sleep between attempts

The -sleep flag inserts a timed delay between command runs.

Run cat kubeconfig.yml, but sleep for 15 seconds between runs.

$ retry -sleep=15s cat kubeconfig.yml

Exponential backoff

The -backoff flag is used with -sleep, and will double the time delay between failed runs. Delay is reset after a successful run.

Run wget https://example.com, sleeping for 15 seconds after the first failure, 30 seconds after the second failure, 1 minute after the third failure, etc...

$ retry -sleep=15s -backoff wget https://example.com

Invert status

The -invert flag is used to flip a task's failure status. Successful task runs will become failures, and vice versa. Useful for when you want to retry a command until it fails.

Run curl https://example.com/health, a maximum of 20 times, until it becomes unresponsive.

$ retry -attempts=20 -invert curl https://example.com/health

Random jitter

The -jitter flag adds a random time range to the sleep duration. Jitter added on top of exponential backoff.

Run cat kubeconfig.yml, sleep for 15 seconds minimum, plus a random 0-10 seconds between each run.

$ retry -sleep=15s -jitter=10s cat kubeconfig.yml

Consecutive successes

The -consecutive flag requires a number of successful command runs to occur in a row in order to be considered successful. Useful for health checking a service that is inconsistent until if if fully started.

GET https://example.com, requiring the command to be successful 3 times in a row.

$ retry -consecutive=3 wget https://example.com

Be quiet!

Lastly, the -quiet flag silences all output (STDOUT and STDERR) from the command. Useful when running retry inside an if.

Run ls -R, but swallow all output.

$ retry -quiet ls -R

Altogether now

Run wget https://example.com a maximum of 10 times. Each run can take a maximum of 15 seconds, and a total of 2 minutes. Delay for 15 seconds before starting. Sleep for 5 seconds between failures with exponential backoff. Lastly, require that the command succeeds 3 times in a row.

$ retry -attempts=10 -task-time=15s -max-time=2m -delay=15s -sleep=5s -backoff -consecutive=3 wget https://example.com

License

This code is distributed under the MIT License, see LICENSE.txt for more information.