Home

Awesome

Parsby

Parser combinator library for Ruby, based on Haskell's Parsec.

Installation

Add this line to your application's Gemfile:

gem 'parsby'

And then execute:

$ bundle

Or install it yourself as:

$ gem install parsby

Examples

If you'd like to jump right into example parsers that use this library, there's a few in this source:

Introduction

This is a library used to define parsers by declaratively describing a syntax using what's commonly referred to as combinators. Parser combinators are functions that take parsers as inputs and/or return parsers as outputs, i.e. they combine parsers into new parsers.

As an example, between is a combinator with 3 parameters: a parser for what's to the left, one for what's to the right, and lastly one for what's in-between them, and it returns a parser that, after parsing, returns the result of the in-between parser:

between(lit("<"), lit(">"), decimal).parse "<100>"
#=> 100

Some commonly used combinators

# Parse argument string literally
lit("foo").parse "foo"
#=> "foo"

# Case insensitive lit
ilit("Foo").parse "fOo"
#=> "fOo"

# Make any value into a parser that results in that value without
# consuming input.
pure("foo").parse ""
#=> "foo"

# Parse foo or bar
(lit("foo") | lit("bar")).parse "bar"
#=> "bar"

# Like `|`, parse one of foo or bar. `choice` is better when you have
# many choices to chose from. You can pass it any number of parsers or
# array of parsers.
choice(lit("foo"), lit("bar")).parse "bar"
#=> "bar"

# Parse with each argument in succesion and group the results in an
# array.
group(lit("foo"), lit("bar")).parse "foobar"
#=> ["foo", "bar"]

# Parse foo and bar, returning bar.
(lit("foo") > lit("bar")).parse "foobar"
#=> "bar"

# Parse foo and bar, returning foo.
(lit("foo") < lit("bar")).parse "foobar"
#=> "foo"

# Make parser optional
group(optional(lit("foo")), lit("bar")).parse "bar"
#=> [nil, "bar"]

# Use parser zero or more times, grouping results in array. many_1, does
# the same, but requires parsing at least once.
many(lit("foo")).parse "foofoo"
#=> ["foo", "foo"]

# Parse many, but each separated by something. sep_by_1 requires at least
# one element to be parsed.
sep_by(lit(","), lit("foo")).parse "foo,foo"
#=> ["foo", "foo"]

# `whitespace` (alias `ws`) is zero or more whitespace characters.
# `whitespace_1` (alias `ws_1`) is one or more whitespace characters.
# `spaced` allows a parser to be surrounded by optional whitespace.
# `whitespace_1` is the base definition. If you extend it to e.g. add the
# parsing of comments, the other combinators will also recognize that
# change.
(whitespace > lit("foo")).parse "   foo"
#=> "foo"
group(lit("foo"), ws_1 > lit("bar")).parse "foo   bar"
#=> ["foo", "bar"]
spaced(lit("foo")).parse "   foo    "
#=> "foo"

# Parse transform result according to block.
lit("foo").fmap {|x| x.upcase }.parse "foo"
#=> "FOO"

# join(p) is the same as p.fmap {|xs| xs.join }
join(sep_by(lit(","), lit("foo") | lit("bar"))).parse "foo,bar"
#=> "foobar"

# Parse a character from the choices in a set of strings or ranges
char_in(" \t\r\n").parse "\t"
#=> "\t"
typical_identifier_characters = ['a'..'z', 'A'..'Z', 0..9, "_"]
join(many(char_in("!?", typical_identifier_characters))).parse "foo23? bar"
#=> "foo23?"

# Parse any one character
any_char.parse "foo"
#=> "f"

# Require end of input at end of parse.
(lit("foo") < eof).parse "foobar"
#=> Parsby::ExpectationFailed: line 1:
  foobar
     |    * failure: eof
  \-/    *| success: lit("foo")
         \|
  |       * failure: (lit("foo") < eof)

# Parse only when other parser fails.
join(many(any_char.that_fails(whitespace_1))).parse "foo bar"
#=> "foo"

# single(p) is the same as p.fmap {|x| [x] }
single(lit("foo")).parse "foo"
#=> ["foo"]

# p1 + p2 is the same as group(p1, p2).fmap {|(r1, r2)| r1 + r2 }
(lit("foo") + (ws > lit("bar"))).parse "foo bar"
#=> "foobar"
(single(lit("foo")) + many(ws > lit("bar"))).parse "foo bar bar"
#=> ["foo", "bar", "bar"]

Defining combinators

If you look at the examples in this source, you'll notice that almost all combinators are defined with define_combinator. Strictly speaking, it's not necessary to use that to define combinators. You can do it with variable assignment or def syntax. Nevertheless, define_combinator is preferred because it automates the assignment of a label to the combinator. Consider this example:

define_combinator :between do |left, right, p|
  left > p < right
end

between(lit("<"), lit(">"), lit("foo")).label
#=> 'between(lit("<"), lit(">"), lit("foo"))'

Having labels that resemble the source code is helpful for the error messages.

If we use def instead of define_combinator, then the label would be that of its definition. In the following case, it would be that assigned by <.

def between(left, right, p)
  left > p < right
end

between(lit("<"), lit(">"), lit("foo")).label
#=> '((lit("<") > lit("foo")) < lit(">"))'

If we're to wrap that parser in a new one, then the label would be simply unknown.

def between(left, right, p)
  Parsby.new {|c| (left > p < right).parse c }
end

between(lit("<"), lit(">"), lit("foo")).label.to_s
#=> "unknown"

Defining parsers as modules

The typical pattern I use is something like this:

module FoobarParser
  include Parsby::Combinators
  extend self

  # Entrypoint nicety
  def parse(s)
    foobar.parse s
  end

  define_combinator :foobar do
    foo + bar
  end

  define_combinator :foo do
    lit("foo")
  end

  define_combinator :bar do
    lit("bar")
  end
end

From that, you can use it directly as:

FoobarParser.parse "foobar"
#=> "foobar"
FoobarParser.foo.parse "foo"
#=> "foo"

Being able to use subparsers directly is useful for when you want to e.g. parse a JSON array, instead of any JSON value.

Writing the parser as a module like that also makes it easy to make a new parser based on it:

module FoobarbazParser
  include FoobarParser
  extend self

  def parse(s)
    foobarbaz.parse s
  end

  define_combinator :foobarbaz do
    foobar + baz
  end

  define_combinator :baz do
    lit("baz")
  end
end

You can also define such a module to hold your own project's combinators to use in multiple parsers.

ExpectationFailed

Here's an example of an error, when parsing fails:

pry(main)> Parsby::Example::LispParser.sexp.parse "(foo `(foo ,bar) 2.3 . . nil)"    
Parsby::ExpectationFailed: line 1:
  (foo `(foo ,bar) 2.3 . . nil)
                         |           * failure: char_in("([")
                         |           * failure: list
                         |          *| failure: symbol
                         |         *|| failure: nil
                         |        *||| failure: string
                         |       *|||| failure: number
                                 \\\||
                         |          *| failure: atom
                         |         *|| failure: abbrev
                                   \\|
                         |           * failure: sexp
                       V            *| success: lit(".")
                   \-/             *|| success: sexp
       \---------/                *||| success: sexp
   \-/                           *|||| success: sexp
  V                             *||||| success: char_in("([")
                                \\\\\|
  |                                  * failure: list
  |                                  * failure: sexp

As can be seen, Parsby manages a tree structure representing parsers and their subparsers, with the information of where a particular parser began parsing, where it ended, whether it succeeded or failed, and the label of the parser.

It might be worth mentioning that when debugging a parser from an unexpected ExpectationFailed error, the backtrace isn't really useful. That's because the backtrace points to the code involved in parsing, not the code involved in constructing the parsers, which succeeded, but is where the problem typically lies. The tree-looking exception message above is meant to somewhat substitute the utility of the backtrace in these cases.

Relating to that, the right-most text are the labels of the corresponding parsers. I find that labels that resemble the source code are quite useful, just like the code location descriptions that appear right-most in backtraces. It's because of this that I consider the use of define_combinator more preferable than using def and explicitly assigning labels.

Cleaning up the parse tree for the trace

If you look at the source of the example lisp parser, you might note that there are a lot more parsers in between those shown in the tree above. sexp is not a direct child of list, for example, despite it appearing as so. There are at least 6 ancestors/descendant parsers between list and sexp. It'd be very much pointless to show them all. They convey little additional information and their labels are very verbose.

The reason why they don't appear is because the splicer.start combinator is used to make the tree look a little cleaner. To show an example of how it works, here's a simplified definition of choice:

define_combinator :choice do |*ps|
  ps = ps.flatten

  ps.reduce(unparseable) do |a, p|
    a | p
  end
end

Let's fail it:

pry(main)> choice(lit("foo"), lit("bar"), lit("baz")).parse "qux"                                   
Parsby::ExpectationFailed: line 1:
  qux
  \-/    * failure: lit("baz")
  \-/   *| failure: lit("bar")
  \-/  *|| failure: lit("foo")
  |   *||| failure: unparseable
      \|||
  |    *|| failure: (unparseable | lit("foo"))
       \||
  |     *| failure: ((unparseable | lit("foo")) | lit("bar"))
        \|
  |      * failure: (((unparseable | lit("foo")) | lit("bar")) | lit("baz"))
  |      * failure: choice(lit("foo"), lit("bar"), lit("baz"))

Those parser intermediaries that use | aren't really making things any clearer. Let's use splicer to remove those:

    define_combinator :choice do |*ps|
      ps = ps.flatten

      splicer.start do |m|
        ps.reduce(unparseable) do |a, p|
          a | m.end(p)
        end
      end
    end

This makes the p parsers appear as direct children of the splicer.start parser in the trace. Let's fail it, again:

pry(main)> choice(lit("foo"), lit("bar"), lit("baz")).parse "qux"                                  
Parsby::ExpectationFailed: line 1:
  qux
  \-/   * failure: lit("baz")
  \-/  *| failure: lit("bar")
  \-/ *|| failure: lit("foo")
      \\|
  |     * failure: splicer.start((((unparseable | splicer.end(lit("foo"))) | splicer.end(lit("bar"))) | splicer.end(lit("baz"))))
  |     * failure: choice(lit("foo"), lit("bar"), lit("baz"))

Now, the only issue left is that define_combinator wraps the resulting parser in another parser. It does this so you can see the label assigned to the combinator and to its definition separately. Let's disable that wrapping by passing wrap: false to it:

    define_combinator :choice, wrap: false do |*ps|
      ps = ps.flatten

      splicer.start do |m|
        ps.reduce(unparseable) do |a, p|
          a | m.end(p)
        end
      end
    end

That causes it to overwrite the label to the resulting parser of the block. Let's fail it, again:

pry(main)> choice(lit("foo"), lit("bar"), lit("baz")).parse "qux"                                  
Parsby::ExpectationFailed: line 1:
  qux
  \-/   * failure: lit("baz")
  \-/  *| failure: lit("bar")
  \-/ *|| failure: lit("foo")
      \\|
  |     * failure: choice(lit("foo"), lit("bar"), lit("baz"))

Recursive parsers with lazy

If we try to define a recursive parser using combinators like so:

define_combinator :value do
  list | lit("foo")
end

define_combinator :list do
  between(lit("["), lit("]"), sep_by(lit(","), spaced(value)))
end

value
#=> SystemStackError: stack level too deep

We get a stack overflow.

This isn't a problem in Haskell because the language evaluates lazily by default. This allows it to define recursive parsers without even thinking about it.

In Ruby's case, we need to be explicit about our laziness. For that, there's lazy. We just need to wrap one of the expressions in the recursive loop with it. It could be the value call in list; it could be list call in value; it could be the whole of value. It really doesn't matter.

define_combinator :value do
  lazy { list | lit("foo") }
end

define_combinator :list do
  between(lit("["), lit("]"), sep_by(lit(","), spaced(value)))
end

value.parse "[[[[foo, foo]]]]"
#=> [[[["foo", "foo"]]]]

Parsing left-recursive languages with reduce combinator

Here's a little arithmetic parser based on the Parsby::Example::ArithmeticParser:

define_combinator :div_op {|left, right| group(left, spaced(lit("/")), right) }
define_combinator :mul_op {|left, right| group(left, spaced(lit("*")), right) }
define_combinator :add_op {|left, right| group(left, spaced(lit("+")), right) }
define_combinator :sub_op {|left, right| group(left, spaced(lit("-")), right) }

def scope(x, &b)
  b.call x
end

define_combinator :expr do
  lazy do
    e = decimal

    # hpe -- higher precedence level expression
    # spe -- same precedence level expression

    e = scope e do |hpe|
      recursive do |spe|
        choice(
          mul_op(hpe, spe),
          div_op(hpe, spe),
          hpe,
        )
      end
    end

    e = scope e do |hpe|
      recursive do |spe|
        choice(
          add_op(hpe, spe),
          sub_op(hpe, spe),
          hpe,
        )
      end
    end
  end
end

expr.parse "5 - 4 - 3"
#=> [5, "-", [4, "-", 3]]

Now, that's incorrectly right-associative because we made the precedence-level parsers right-recursive. See how the block parameter of recursive is used for the right operands and not the left ones?

Let's fix that by switching the parsers used for the operands:

define_combinator :expr do
  lazy do
    e = decimal

    # hpe -- higher precedence level expression
    # spe -- same precedence level expression

    e = scope e do |hpe|
      recursive do |spe|
        choice(
          mul_op(spe, hpe),
          div_op(spe, hpe),
          hpe,
        )
      end
    end

    e = scope e do |hpe|
      recursive do |spe|
        choice(
          add_op(spe, hpe),
          sub_op(spe, hpe),
          hpe,
        )
      end
    end
  end
end

expr.parse "5 - 4 - 3"
# ...

If you ran this, it might take a while, but eventually you'll have a bunch of SystemStackError: stack level too deep errors.

What's happening is that e.g. while trying to check whether the expression is a subtraction, it needs to first resolve the left operand, and as part of that it needs to check whether that's a subtraction, and so on and so forth. In other words, this causes infinite recursion. It can't even read a single character of the input because of this.

Our problem is that we're parsing top-down. We're trying to understand what the whole thing is before looking at the parts. We need to parse bottom-up. Successfully parse a small piece, then figure out what the whole thing is as we keep reading. To do that while keeping our definitions declarative, we can use the reduce combinator (in combination with pure):

define_combinator :expr do
  lazy do
    e = decimal

    # hpe -- higher precedence level expression
    # spe -- same precedence level expression

    e = scope e do |hpe|
      reduce hpe do |left_result|
        choice(
          mul_op(pure(left_result), hpe),
          div_op(pure(left_result), hpe),
        )
      end
    end

    e = scope e do |hpe|
      reduce hpe do |left_result|
        choice(
          add_op(pure(left_result), hpe),
          sub_op(pure(left_result), hpe),
        )
      end
    end
  end
end

expr.parse "5 - 4 - 3"
#=> [[5, "-", 4], "-", 3]

reduce starts parsing with its argument, in this case hpe, then passes the result to the block, which uses it for the resolved left operand. reduce then parses with the parser returned by the block and passes the result again to the block, and so on and so forth until parsing fails, returning the result of the last successful parse.

In effect, we're parsing left operands bottom-up and right operands top-down.

Parsby.new

Normally one ought to be able to define parsers using just combinators, but there are times when one might need more control. For those times, the most raw way to define a parser is using Parsby.new.

Here's lit as an example:

define_combinator :lit, wrap: false do |e, case_sensitive: true|
  Parsby.new do |c|
    a = c.bio.read e.length
    if case_sensitive ? a == e : a.to_s.downcase == e.downcase
      a
    else
      raise ExpectationFailed.new c
    end
  end
end

It takes a string argument for what it expects to parse, and returns what was actually parsed if it matches the expectation.

The block parameter c is a Parsby::Context. c.bio holds a Parsby::BackedIO. The parse method of Parsby objects accepts ideally any IO (and Strings, which it turns into StringIO) and then wraps them with BackedIO to give the IO the ability to backtrack.

Parsing from a string, a file, a pipe, a socket, ...

Any IO ought to work (unit tests currently have only checked pipes, though). When you pass a string to Parsby#parse it wraps it with StringIO before using it.

Comparing with Haskell's Parsec

If you're already familiar with Parsec, here are some similarities:

# Parsby                                 # -- Parsec
                                         #
lit("foo")                               # string "foo"
                                         #
foo | bar                                # foo <|> bar
                                         #
pure "foo"                               # pure "foo"
                                         #
foo.then {|x| bar x }                    # foo >>= \x -> bar x
                                         #
foobar = Parsby.new do |c|               # foobar = do
  x = foo.parse c                        #   x <- foo
  bar(x).parse c                         #   bar x
end                                      #
                                         #
lit("(") > foo < lit(")")                # string "(" *> foo <* string ")"
                                         #
lit("5").fmap {|n| n.to_i + 1 }          # fmap (\n -> read n + 1) (string "5")
                                         #
group(x, y, z)                           # (,,) <$> x <*> y <*> z
                                         #
group(                                   #
  w,                                     #
  group(x, y),                           #
  z,                                     #
).fmap do |(wr, (xr, yr), zr)|           #
  Foo.new(wr, Bar.new(xr, yr), zr)       # Foo <$> w <*> (Bar <$> x <*> y) <*> z
end                                      #
                                         #
                                         # -- Means the same, but this
                                         # -- raises an error in Haskell
                                         # -- because it requires an
                                         # -- infinite type [[[[...]]]]
recursive do |p|                         # fix $ \p ->
  between(lit("("), lit(")"),            #  between (string "(") (string ")") $
    single(p) | pure([])                 #    ((:[]) <$> p) <|> pure []
  end                                    #
end                                      #

Development

After checking out the repo, run bin/setup to install dependencies. Then, run rake spec to run the tests. You can also run bin/console for an interactive prompt that will allow you to experiment.

bin/console includes Parsby::Combinators into the top-level so the combinators and define_combinator are available directly from the prompt. It also defines reload! to quickly load changes made to the source.

To install this gem onto your local machine, run bundle exec rake install.