Awesome

Arduino Radio Shield

"The Swiss Army Knife of Arduino Radio shields" - Hackaday.com blog

Designed for use with RadioLib - Universal wireless communication library for Arduino.

Revision C

The latest hardware revision, compatible with both 5V and 3.3V Arduino boards. The entire project was also rebranded as Radio Shield!

Additional modules:

SIM800C GSM module
CC1101 FSK module
nRF24L01 2.4 GHz module

<img src="https://github.com/jgromes/KiteShield/blob/master/doc/revC/png/shield.png" alt="Radio Shield Rev.C" width="48%" height="48%"/>

Revision B

Added some improvements over rev. A, such as improved Arduino Mega support and interrupt selection pin header.

<img src="https://github.com/jgromes/KiteShield/blob/master/doc/revB/png/shield.png" alt="KITE Shield Rev.B" width="48%" height="48%"/>

Revision A

After a first few prototypes, rev. A is the first fully tested and working shield.
Supported modules:

ESP8266 WiFi module
HC-05 Bluetooth module
RFM69 FSK/OOK radio module
SX127x series LoRa modules - including SX1272, SX1276 and SX1278
XBee modules (S2B)

<img src="https://github.com/jgromes/KiteShield/blob/master/doc/revA/png/shield.png" alt="KITE Shield Rev.A" width="48%" height="48%"/>