Home

Awesome

3320VCF

Kicad project files of a CEM3320/AS3320 based VCF. Part of a modular DIY synth project, other modules to follow in other repositories.

Used the Audio.lib from https://kicad.github.io/symbols/Audio to extend the Kicad library for the AS3320 component.

Designed to work with +/- 15V, but will most likely work fine for +/- 12V as well

The PCB is 9.5 x 5.5 cm and has no PCB-mounting of potmeters, switches, jacks; these are all connected by pin header connectors

Stages 1 and 2 are switchable between HP and LP mode by SW1 and SW2. Stages 3 and 4 are fixed on LP mode. These allow for the following filter modes:

Background of the mode configurations: https://electricdruid.net/multimode-filters-part-1-reconfigurable-filters/ section Craig Anderton’s Multiple Identity Filter.

Capacitors on pin 4, 5, 11 and 16 should be 1% or less tolerance!

F1 and F2 fuses are not really required and can be replaced by shorts.