Home

Awesome

CORS Middleware for Laravel

Build Status Latest Stable Version Software License Total Downloads Fruitcake

Implements https://github.com/fruitcake/php-cors for Laravel

Note for users upgrading to Laravel 9, 10 or higher

This package is deprecated because all supported Laravel versions now include the CORS middleware in the core.

Since Laravel 9.2, this Middleware is included in laravel/framework. You can use the provided middleware, which should be compatible with the Middleware and config provided in this package. See https://github.com/laravel/laravel/pull/5825/files for the changes.

Steps to upgrade:

  1. Remove "fruitcake/laravel-cors" from your composer.json
  2. Replace \Fruitcake\Cors\HandleCors::class, with \Illuminate\Http\Middleware\HandleCors::class, in app/Http/Kernel.php

See https://github.com/fruitcake/php-cors for advanced usage. The config stays the same.

About

The laravel-cors package allows you to send Cross-Origin Resource Sharing headers with Laravel middleware configuration.

If you want to have a global overview of CORS workflow, you can browse this image.

Upgrading from 0.x (barryvdh/laravel-cors)

When upgrading from 0.x versions, there are some breaking changes:

Features

Installation

Require the fruitcake/laravel-cors package in your composer.json and update your dependencies:

composer require fruitcake/laravel-cors

If you get a conflict, this could be because an older version of barryvdh/laravel-cors or fruitcake/laravel-cors is installed. Remove the conflicting package first, then try install again:

composer remove barryvdh/laravel-cors fruitcake/laravel-cors
composer require fruitcake/laravel-cors

Global usage

To allow CORS for all your routes, add the HandleCors middleware at the top of the $middleware property of app/Http/Kernel.php class:

protected $middleware = [
  \Fruitcake\Cors\HandleCors::class,
    // ...
];

Now update the config to define the paths you want to run the CORS service on, (see Configuration below):

'paths' => ['api/*'],

Configuration

The defaults are set in config/cors.php. Publish the config to copy the file to your own config:

php artisan vendor:publish --tag="cors"

Note: When using custom headers, like X-Auth-Token or X-Requested-With, you must set the allowed_headers to include those headers. You can also set it to ['*'] to allow all custom headers.

Note: If you are explicitly whitelisting headers, you must include Origin or requests will fail to be recognized as CORS.

Options

OptionDescriptionDefault value
pathsYou can enable CORS for 1 or multiple paths, eg. ['api/*'] []
allowed_methodsMatches the request method.['*']
allowed_originsMatches the request origin. Wildcards can be used, eg. *.mydomain.com or mydomain.com:*['*']
allowed_origins_patternsMatches the request origin with preg_match.[]
allowed_headersSets the Access-Control-Allow-Headers response header.['*']
exposed_headersSets the Access-Control-Expose-Headers response header.[]
max_ageSets the Access-Control-Max-Age response header.0
supports_credentialsSets the Access-Control-Allow-Credentials header.false

allowed_origins, allowed_headers and allowed_methods can be set to ['*'] to accept any value.

Note: For allowed_origins you must include the scheme when not using a wildcard, eg. ['http://example.com', 'https://example.com']. You must also take into account that the scheme will be present when using allowed_origins_patterns.

Note: Try to be as specific as possible. You can start developing with loose constraints, but it's better to be as strict as possible!

Note: Because of http method overriding in Laravel, allowing POST methods will also enable the API users to perform PUT and DELETE requests as well.

Note: Sometimes it's necessary to specify the port (when you're coding your app in a local environment for example). You can specify the port or using a wildcard here too, eg. localhost:3000, localhost:* or even using a FQDN app.mydomain.com:8080

Lumen

On Lumen, just register the ServiceProvider manually in your bootstrap/app.php file:

$app->register(Fruitcake\Cors\CorsServiceProvider::class);

Also copy the cors.php config file to config/cors.php and put it into action:

$app->configure('cors');

Global usage for Lumen

To allow CORS for all your routes, add the HandleCors middleware to the global middleware and set the paths property in the config.

$app->middleware([
    // ...
    Fruitcake\Cors\HandleCors::class,
]);

Common problems

Wrong config

Make sure the path option in the config is correct and actually matches the route you are using. Remember to clear the config cache as well.

Error handling, Middleware order

Sometimes errors/middleware that return own responses can prevent the CORS Middleware from being run. Try changing the order of the Middleware and make sure it's the first entry in the global middleware, not a route group. Also check your logs for actual errors, because without CORS, the errors will be swallowed by the browser, only showing CORS errors. Also try running it without CORS to make sure it actually works.

Authorization headers / Credentials

If your Request includes an Authorization header or uses Credentials mode, set the supports_credentials value in the config to true. This will set the Access-Control-Allow-Credentials Header to true.

Echo/die

If you use echo(), dd(), die(), exit(), dump() etc in your code, you will break the Middleware flow. When output is sent before headers, CORS cannot be added. When the script exits before the CORS middleware finishes, CORS headers will not be added. Always return a proper response or throw an Exception.

Disabling CSRF protection for your API

If possible, use a route group with CSRF protection disabled. Otherwise you can disable CSRF for certain requests in App\Http\Middleware\VerifyCsrfToken:

protected $except = [
    'api/*',
    'sub.domain.zone' => [
      'prefix/*'
    ],
];

Duplicate headers

The CORS Middleware should be the only place you add these headers. If you also add headers in .htaccess, nginx or your index.php file, you will get duplicate headers and unexpected results.

No Cross-Site requests

If you are not doing Cross-Site requests, meaning if you are not requesting site-a.com/api from site-b.com, your browser will not send the Origin: https://site-b.com request header, CORS will be "disabled" as the Access-Control-Allow-Origin header will be also missing. This happens because requests are being dispatched from the same and no protection is needed in this case.

License

Released under the MIT License, see LICENSE.