Home

Awesome

Build Status Coverage Status npm Version Downloads Per Month Mentioned in Awesome Node.js

i2c-bus

I2C serial bus access with Node.js on Linux boards like the Raspberry Pi or BeagleBone. The i2c-bus API supports promises and async/await, asynchronous callbacks and synchronous execution.

i2c-bus supports Node.js versions 10, 12, 14, 16, 18 and 20.

Contents

Installation

npm install i2c-bus

The way in which I2C is configured varies from board to board. Sometimes no configuraton is required, but sometimes it is:

Usage

The example programs below show how to use a MCP9808 I2C temperature sensor to determine the temperature.

MCP9808 I2C temperature sensor connected to a Raspberry Pi

Example 1 - Promises

Determine the temperature with a MCP9808 I2C temperature sensor using promises.

const i2c = require('i2c-bus');

const MCP9808_ADDR = 0x18;
const TEMP_REG = 0x05;

const toCelsius = rawData => {
  rawData = (rawData >> 8) + ((rawData & 0xff) << 8);
  let celsius = (rawData & 0x0fff) / 16;
  if (rawData & 0x1000) {
    celsius -= 256;
  }
  return celsius;
};

i2c.openPromisified(1).
then(i2c1 => i2c1.readWord(MCP9808_ADDR, TEMP_REG).
  then(rawData => console.log(toCelsius(rawData))).
  then(_ => i2c1.close())
).catch(console.log);

Example 2 - Promises, Plain I2C and Buffers

Determine the temperature with a MCP9808 I2C temperature sensor using promises, plain I2C and Buffer objects.

const i2c = require('i2c-bus');

const MCP9808_ADDR = 0x18;
const TEMP_REG = 0x05;

const toCelsius = rawData => {
  let celsius = (rawData & 0x0fff) / 16;
  if (rawData & 0x1000) {
    celsius -= 256;
  }
  return celsius;
};

const wbuf = Buffer.from([TEMP_REG]);
const rbuf = Buffer.alloc(2);

i2c.openPromisified(1).
then(i2c1 => i2c1.i2cWrite(MCP9808_ADDR, wbuf.length, wbuf).
  then(_ => i2c1.i2cRead(MCP9808_ADDR, rbuf.length, rbuf)).
  then(data => console.log(toCelsius(data.buffer.readUInt16BE()))).
  then(_ => i2c1.close())
).catch(console.log);

Example 3 - Asynchronous Callbacks

Determine the temperature with a MCP9808 I2C temperature sensor using asynchronous callbacks.

const i2c = require('i2c-bus');

const MCP9808_ADDR = 0x18;
const TEMP_REG = 0x05;

const toCelsius = rawData => {
  rawData = (rawData >> 8) + ((rawData & 0xff) << 8);
  let celsius = (rawData & 0x0fff) / 16;
  if (rawData & 0x1000) {
    celsius -= 256;
  }
  return celsius;
};

const i2c1 = i2c.open(1, err => {
  if (err) throw err;

  i2c1.readWord(MCP9808_ADDR, TEMP_REG, (err, rawData) => {
    if (err) throw err;

    console.log(toCelsius(rawData));

    i2c1.close(err => {
      if (err) throw err;
    });
  });
});

Example 4 - Synchronous Methods

Determine the temperature with a MCP9808 I2C temperature sensor using synchronous methods.

const i2c = require('i2c-bus');

const MCP9808_ADDR = 0x18;
const TEMP_REG = 0x05;

const toCelsius = rawData => {
  rawData = (rawData >> 8) + ((rawData & 0xff) << 8);
  let celsius = (rawData & 0x0fff) / 16;
  if (rawData & 0x1000) {
    celsius -= 256;
  }
  return celsius;
};

const i2c1 = i2c.openSync(1);
const rawData = i2c1.readWordSync(MCP9808_ADDR, TEMP_REG);
console.log(toCelsius(rawData));
i2c1.closeSync();

API

Functions

Class Bus

All methods in class Bus have asynchronous callback and synchronous forms. For promise support see class PromisifiedBus.

The asynchronous callback form always take a completion callback as its last argument. The arguments passed to the completion callback depend on the method, but the first argument is always reserved for an exception. If the operation was completed successfully, then the first argument will be null or undefined.

When using the synchronous form any exceptions are immediately thrown. You can use try/catch to handle exceptions or allow them to bubble up.

Class PromisifiedBus

All methods in class PromisifiedBus have the asynchronous promise form. For asynchronous callback and synchronous forms see class Bus.

Class I2cFuncs

open(busNumber [, options], cb)

Asynchronous open. Returns a new Bus object. The callback gets one argument (err).

The following options are supported:

openSync(busNumber [, options])

Synchronous open. Returns a new Bus object.

The following options are supported:

openPromisified(busNumber [, options])

Asynchronous open. Returns a Promise that, when resolved, yields a PromisifiedBus object.

The following options are supported:

bus.close(cb)

Asynchronous close. Frees system resources used by this instance. The callback gets one argument (err).

bus.closeSync()

Synchronous close. Frees system resources used by this instance.

bus.i2cFuncs(cb)

Determine functionality of the bus/adapter asynchronously. The callback gets two argument (err, funcs). funcs is a frozen I2cFuncs object describing the functionality available. See also I2C functionality.

bus.i2cFuncsSync()

Determine functionality of the bus/adapter Synchronously. Returns a frozen I2cFuncs object describing the functionality available. See also I2C functionality.

bus.scan([startAddr,] [endAddr,] cb)

bus.scan(cb) - scan for I2C devices in address range 0x03 through 0x77 <br/> bus.scan(addr, cb) - scan for an I2C device at address addr <br/> bus.scan(startAddr, endAddr, cb) - scan for I2C devices in address range startAddr through endAddr <br/>

Scans the I2C bus asynchronously for devices. The default address range 0x03 through 0x77 is the same as the default address range used by the i2cdetect command line tool. The callback gets two arguments (err, devices). devices is an array of numbers where each number represents the I2C address of a device which was detected.

bus.scanSync([startAddr,] [endAddr])

bus.scan() - scan for I2C devices in address range 0x03 through 0x77 <br/> bus.scan(addr) - scan for an I2C device at address addr <br/> bus.scan(startAddr, endAddr) - scan for I2C devices in address range startAddr through endAddr <br/>

Scans the I2C bus synchronously for devices. The default address range 0x03 through 0x77 is the same as the default address range used by the i2cdetect command line tool. Returns an array of numbers where each number represents the I2C address of a device which was detected.

bus.deviceId(addr, cb)

Asynchronous I2C device Id. The callback gets two arguments (err, id). id is an object with the properties manufacturer, product and if known a human readable name for the associated manufacturer. manufacturer and product are numbers, name is a string.

bus.deviceIdSync(addr)

Synchronous I2C device Id. Returns an object with the properties manufacturer, product and if known a human readable name for the associated manufacturer. manufacturer and product are numbers, name is a string.

bus.i2cRead(addr, length, buffer, cb)

Asynchronous plain I2C read. The callback gets three argument (err, bytesRead, buffer). bytesRead is the number of bytes read.

bus.i2cReadSync(addr, length, buffer)

Synchronous plain I2C read. Returns the number of bytes read.

bus.i2cWrite(addr, length, buffer, cb)

Asynchronous plain I2C write. The callback gets three argument (err, bytesWritten, buffer). bytesWritten is the number of bytes written.

bus.i2cWriteSync(addr, length, buffer)

Synchronous plain I2C write. Returns the number of bytes written.

bus.readByte(addr, cmd, cb)

Asynchronous SMBus read byte. The callback gets two arguments (err, byte). byte is an unsigned integer in the range 0 to 255.

bus.readByteSync(addr, cmd)

Synchronous SMBus read byte. Returns the byte read. byte is an unsigned integer in the range 0 to 255.

bus.readWord(addr, cmd, cb)

Asynchronous SMBus read word. The callback gets two arguments (err, word). word is an unsigned integer in the range 0 to 65535.

bus.readWordSync(addr, cmd)

Synchronous SMBus read word. Returns the word read. word is an unsigned integer in the range 0 to 65535.

bus.readI2cBlock(addr, cmd, length, buffer, cb)

Asynchronous I2C block read (not defined by the SMBus specification). Reads a block of bytes from a device, from a designated register that is specified by cmd. The callback gets three arguments (err, bytesRead, buffer). bytesRead is the number of bytes read.

bus.readI2cBlockSync(addr, cmd, length, buffer)

Synchronous I2C block read (not defined by the SMBus specification). Reads a block of bytes from a device, from a designated register that is specified by cmd. Returns the number of bytes read.

bus.receiveByte(addr, cb)

Asynchronous SMBus receive byte. The callback gets two arguments (err, byte). byte is an unsigned integer in the range 0 to 255.

bus.receiveByteSync(addr)

Synchronous SMBus receive byte. Returns the byte received. byte is an unsigned integer in the range 0 to 255.

bus.sendByte(addr, byte, cb)

Asynchronous SMBus send byte. The callback gets one argument (err).

bus.sendByteSync(addr, byte)

Synchronous SMBus send byte.

bus.writeByte(addr, cmd, byte, cb)

Asynchronous SMBus write byte. The callback gets one argument (err).

bus.writeByteSync(addr, cmd, byte)

Synchronous SMBus write byte.

bus.writeWord(addr, cmd, word, cb)

Asynchronous SMBus write word. The callback gets one argument (err).

bus.writeWordSync(addr, cmd, word)

Synchronous SMBus write word.

bus.writeQuick(addr, bit, cb)

Asynchronous SMBus quick command. Writes a single bit to the device. The callback gets one argument (err).

bus.writeQuickSync(addr, bit)

Synchronous SMBus quick command. Writes a single bit to the device.

bus.writeI2cBlock(addr, cmd, length, buffer, cb)

Asynchronous I2C block write (not defined by the SMBus specification). Writes a block of bytes to a device, to a designated register that is specified by cmd. The callback gets three argument (err, bytesWritten, buffer). bytesWritten is the number of bytes written.

bus.writeI2cBlockSync(addr, cmd, length, buffer)

Synchronous I2C block write (not defined by the SMBus specification). Writes a block of bytes to a device, to a designated register that is specified by cmd.

bus.promisifiedBus()

Return the PromisifiedBus instance for this Bus instance.

promisifiedBus.close()

Asynchronous close. Returns a Promise that will be resolved with no arguments once the underlying resources have been released, or will be rejected if an error occurs while closing.

promisifiedBus.i2cFuncs()

Determine functionality of the bus/adapter asynchronously. Returns a Promise that on success will be resolved with a frozen I2cFuncs object describing the functionality available. The returned Promise will be rejected if an error occurs. See also I2C functionality.

promisifiedBus.scan([startAddr,] [endAddr])

bus.scan() - scan for I2C devices in address range 0x03 through 0x77 <br/> bus.scan(addr) - scan for an I2C device at address addr <br/> bus.scan(startAddr, endAddr) - scan for I2C devices in address range startAddr through endAddr <br/>

Scans the I2C bus asynchronously for devices. The default address range 0x03 through 0x77 is the same as the default address range used by the i2cdetect command line tool. Returns a Promise that on success will be resolved with an array of numbers where each number represents the I2C address of a device which was detected. The returned Promise will be rejected if an error occurs.

promisifiedBus.deviceId(addr)

Asynchronous I2C device Id. Returns a Promise that will be resolved with an id object on success, or will be rejected if an error occurs. id is an object with the properties manufacturer, product and if known a human readable name for the associated manufacturer. manufacturer and product are numbers, name is a string.

promisifiedBus.i2cRead(addr, length, buffer)

Asynchronous plain I2C read. Returns a Promise that on success will be resolved with an object with a bytesRead property identifying the number of bytes read, and a buffer property that is a reference to the passed in buffer argument. The returned Promise will be rejected if an error occurs.

promisifiedBus.i2cWrite(addr, length, buffer)

Asynchronous plain I2C write. Returns a Promise that on success will be resolved with an object with a bytesWritten property identifying the number of bytes written, and a buffer property that is a reference to the passed in buffer argument. The returned promise will be rejected if an error occurs.

promisifiedBus.readByte(addr, cmd)

Asynchronous SMBus read byte. Returns a Promise that will be resolved with a number representing the byte read on success, or will be rejected if an error occurs. byte is an unsigned integer in the range 0 to 255.

promisifiedBus.readWord(addr, cmd)

Asynchronous SMBus read word. Returns a Promise that will be resolved with a number representing the word read on success, or will be rejected if an error occurs. word is an unsigned integer in the range 0 to 65535.

promisifiedBus.readI2cBlock(addr, cmd, length, buffer)

Asynchronous I2C block read (not defined by the SMBus specification). Reads a block of bytes from a device, from a designated register that is specified by cmd. Returns a Promise that on success will be resolved with an object with a bytesRead property identifying the number of bytes read, and a buffer property that is a reference to the passed in buffer argument. The returned Promise will be rejected if an error occurs.

promisifiedBus.receiveByte(addr)

Asynchronous SMBus receive byte. Returns a Promise that will be resolved with a number representing the byte received on success, or will be rejected if an error occurs. byte is an unsigned integer in the range 0 to 255.

promisifiedBus.sendByte(addr, byte)

Asynchronous SMBus send byte. Returns a Promise that will be resolved with no arguments on success, or will be rejected if an error occurs.

promisifiedBus.writeByte(addr, cmd, byte)

Asynchronous SMBus write byte. Returns a Promise that will be resolved with no arguments on success, or will be rejected if an error occurs.

promisifiedBus.writeWord(addr, cmd, word)

Asynchronous SMBus write word. Returns a Promise that will be resolved with no arguments on success, or will be rejected if an error occurs.

promisifiedBus.writeQuick(addr, bit)

Asynchronous SMBus quick command. Writes a single bit to the device. Returns a Promise that will be resolved with no arguments on success, or will be rejected if an error occurs.

promisifiedBus.writeI2cBlock(addr, cmd, length, buffer)

Asynchronous I2C block write (not defined by the SMBus specification). Writes a block of bytes to a device, to a designated register that is specified by cmd. Returns a Promise that on success will be resolved with an object with a bytesWritten property identifying the number of bytes written, and a buffer property that is a reference to the passed in buffer argument. The returned promise will be rejected if an error occurs.

promisifiedBus.bus()

Return the Bus instance for this PromisifiedBus instance.

funcs.i2c - boolean

Specifies whether or not the adapter handles plain I2C-level commands (Pure SMBus adapters typically can not do these, I2C_FUNC_I2C).

funcs.tenBitAddr - boolean

Specifies whether or not the adapter handles the 10-bit address extensions (I2C_FUNC_10BIT_ADDR).

funcs.protocolMangling - boolean

Specifies whether or not the adapter knows about the I2C_M_IGNORE_NAK, I2C_M_REV_DIR_ADDR and I2C_M_NO_RD_ACK flags (which modify the I2C protocol! I2C_FUNC_PROTOCOL_MANGLING).

funcs.smbusPec - boolean

Specifies whether or not the adapter handles packet error checking (I2C_FUNC_SMBUS_PEC).

funcs.smbusBlockProcCall - boolean

Specifies whether or not the adapter handles the SMBus block process call command (I2C_FUNC_SMBUS_BLOCK_PROC_CALL).

funcs.smbusQuick - boolean

Specifies whether or not the adapter handles the SMBus quick command (I2C_FUNC_SMBUS_QUICK).

funcs.smbusReceiveByte - boolean

Specifies whether or not the adapter handles the SMBus receive byte command (I2C_FUNC_SMBUS_READ_BYTE).

funcs.smbusSendByte - boolean

Specifies whether or not the adapter handles the SMBus send byte command (I2C_FUNC_SMBUS_WRITE_BYTE).

funcs.smbusReadByte - boolean

Specifies whether or not the adapter handles the SMBus read byte command (I2C_FUNC_SMBUS_READ_BYTE_DATA).

funcs.smbusWriteByte - boolean

Specifies whether or not the adapter handles the SMBus write byte command (I2C_FUNC_SMBUS_WRITE_BYTE_DATA).

funcs.smbusReadWord - boolean

Specifies whether or not the adapter handles the SMBus read word command (I2C_FUNC_SMBUS_READ_WORD_DATA).

funcs.smbusWriteWord - boolean

Specifies whether or not the adapter handles the SMBus write word command (I2C_FUNC_SMBUS_WRITE_WORD_DATA).

funcs.smbusProcCall - boolean

Specifies whether or not the adapter handles the SMBus process call command (I2C_FUNC_SMBUS_PROC_CALL).

funcs.smbusReadBlock - boolean

Specifies whether or not the adapter handles the SMBus read block command (I2C_FUNC_SMBUS_READ_BLOCK_DATA).

funcs.smbusWriteBlock - boolean

Specifies whether or not the adapter handles the SMBus write block command (I2C_FUNC_SMBUS_WRITE_BLOCK_DATA).

funcs.smbusReadI2cBlock - boolean

Specifies whether or not the adapter handles the SMBus read I2C block command (I2C_FUNC_SMBUS_READ_I2C_BLOCK).

funcs.smbusWriteI2cBlock - boolean

Specifies whether or not the adapter handles the SMBus write i2c block command (I2C_FUNC_SMBUS_WRITE_I2C_BLOCK).

TypeScript Type Definitions

TypeScript type definitions for i2c-bus can be found in the Definitely Typed repository at https://github.com/DefinitelyTyped/DefinitelyTyped/tree/master/types/i2c-bus.