Home

Awesome

Build Status License

Biomake

Biomake is a make-compatible utility for managing builds (or analysis workflows) involving multiple dependent files. It supports most of the functionality (and syntax) of GNU Make, along with neat extensions like cluster-based job processing, multiple wildcards per target, MD5 checksums instead of timestamps, and declarative logic programming in Prolog.

Indeed: Prolog. No knowledge of the dark logical arts is necessary to use Biomake; the software can be run directly off a GNU Makefile. However, if you know (or are prepared to learn) a little Prolog, you can do a lot more. Makefiles are logic programs: their power comes from combining a declarative specification of dependencies with procedural shell scripts to build targets. Prolog is a simple but expressive language for logic programming that allows Makefile rules to be extended in sophisticated and flexible ways.

Getting Started

  1. Install SWI-Prolog from http://www.swi-prolog.org

  2. Get the latest biomake source from github. No installation steps are required. Just add it to your path (changing the directory if necessary):

    export PATH=$PATH:$HOME/biomake/bin

  3. Get (minimal) help from the command line:

    biomake -h

  4. Create a 'Makefile' or a 'Makeprog' (see below)

Alternate installation instructions

If you want to install biomake system-wide, instead of adding it to your path, type make install (or bin/biomake install) in the top level directory of the repository. This will copy the repository into /usr/local/share and create a symlink to /usr/local/bin. (If you just want to create the symlink and leave the repository where it is, type make symlink instead.)

You can also try make test (or, equivalently, biomake test) to run the test suite.

The program can also be installed via the SWI-Prolog pack system. Just start SWI and type:

?- pack_install('biomake').

Command-line

biomake [OPTIONS] [TARGETS]

Options

-h,--help 
    Show help
-v,--version 
    Show version
-n,--dry-run,--recon,--just-print 
    Print the commands that would be executed, but do not execute them
-B,--always-make 
    Always build fresh target even if dependency is up to date
-f,--file,--makefile GNUMAKEFILE
    Use a GNU Makefile as the build specification [default: Makefile]
-p,--prog,--makeprog MAKEPROG
    Use MAKEPROG as the (Prolog) build specification [default: Makeprog]
-m,--eval,--makefile-syntax STRING
    Evaluate STRING as GNU Makefile syntax
-P,--eval-prolog,--makeprog-syntax STRING
    Evaluate STRING as Prolog Makeprog syntax
-I,--include-dir DIR
    Specify search directory for included Makefiles
--target TARGET
    Force biomake to recognize a target even if it looks like an option
-T,--translate,--save-prolog FILE
    Translate GNU Makefile to Prolog Makeprog syntax
-W,--what-if,--new-file,--assume-new TARGET
    Pretend that TARGET has been modified
-o,--old-file,--assume-old TARGET
    Do not remake TARGET, or remake anything on account of it
-k,--keep-going 
    Keep going after error
-S,--no-keep-going,--stop 
    Stop after error
-t,--touch 
    Touch files (and update MD5 hashes, if appropriate) instead of running recipes
-N,--no-dependencies 
    Do not test or rebuild dependencies
-D,--define Var Val
    Assign Makefile variables from command line
Var=Val 
    Alternative syntax for '-D Var Val'
-s,--quiet,--silent 
    Silent operation; do not print recipes as they are executed
--one-shell 
    Run recipes in single shell (loosely equivalent to GNU Make's .ONESHELL)
-y,--sync,--sync-dir URI
    Synchronize current working directory to a remote URI. If no --sync-exec is specified, S3-form URIs (s3://mybucket/my/path) are handled using the AWS CLI tool; other URIs will be passed to rsync.
-x,--sync-exec COMMAND
    Specify executable for --sync.
-H,--md5-hash 
    Use MD5 hashes instead of timestamps
-C,--no-md5-cache 
    Recompute MD5 checksums whenever biomake is restarted
-M,--no-md5-timestamp 
    Do not recompute MD5 checksums when timestamps appear stale
-Q,--queue-engine ENGINE
    Queue recipes using ENGINE (supported: poolq,sge,pbs,slurm,test)
-j,--jobs JOBS
    Number of job threads (poolq engine)
--qsub-exec PATH
    Path to qsub (sge,pbs) or sbatch (slurm)
--qdel-exec PATH
    Path to qdel (sge,pbs) or scancel (slurm)
--queue-args 'ARGS'
    Queue-specifying arguments for qsub/qdel (sge,pbs) or sbatch/scancel (slurm)
--qsub-args,--sbatch-args 'ARGS'
    Additional arguments for qsub (sge,pbs) or sbatch (slurm)
--qsub-use-biomake,--sbatch-use-biomake 
    Force qsub/sbatch to always call biomake recursively
--qsub-biomake-args,--sbatch-biomake-args 'ARGS'
    Arguments passed recursively to biomake by qsub/sbatch (default: '-N')
--qsub-header,--sbatch-header 'HEADER'
    Header for qsub (sge,pbs) or sbatch (slurm)
--qsub-header-file,--sbatch-header-file 'FILENAME'
    Header file for qsub (sge,pbs) or sbatch (slurm)
--qdel-args,--scancel-args 'ARGS'
    Additional arguments for qdel (sge,pbs) or scancel (slurm)
--flush,--qsub-flush <target or directory>
    Erase all jobs for given target/dir
-d 
    [developers] Print debugging messages. Equivalent to '--debug verbose'
--debug MSG
    [developers] Richer debugging messages. MSG can be verbose, bindrule, build, pattern, makefile, makeprog, md5...
--trace PREDICATE
    [developers] Print debugging trace for given predicate
--no-backtrace 
    [developers] Do not print a backtrace on error

Embedding Prolog in Makefiles

Brief overview:

Examples

This assumes some knowledge of GNU Make and Makefiles.

Unlike makefiles, biomake allows multiple variables in pattern matching. Let's say we have a program called align that compares two files producing some output (e.g. biological sequence alignment, or ontology alignment). Assume our file convention is to suffix ".fa" on the inputs. We can write a Makefile with the following:

align-$X-$Y: $X.fa $Y.fa
    align $X.fa $Y.fa > $@

Now if we have files x.fa and y.fa we can type:

biomake align-x-y

Prolog extensions allow us to do even fancier things with logic. Specifically, we can embed arbitrary Prolog, including both database facts and rules. We can use these rules to control flow in a way that is more powerful than makefiles.

Let's say we only want to run a certain program when the inputs match a certain table in our database. We can embed Prolog in our Makefile as follows:

prolog
sp(mouse).
sp(human).
sp(zebrafish).
endprolog

align-$X-$Y: $X.fa $Y.fa {sp(X),sp(Y)}
    align $X.fa $Y.fa > $@

The lines beginning sp between prolog and endprolog define the set of species that we want the rule to apply to. The rule itself consists of 4 parts:

In this case, the Prolog goal succeeds with 9 solutions, with 3 different values for X and Y. If we type...

biomake align-platypus-coelacanth

...it will not succeed, even if the .fa files are on the filesystem. This is because the goal {sp(X),sp(Y)} cannot be satisfied for these two values of X and Y.

To get a list of all matching targets, we can use the special BioMake function $(bagof...) which wraps the Prolog predicate bagof/3. The following example also uses the Prolog predicates format/2 and format/3, for formatted output:

prolog

sp(mouse).
sp(human).
sp(zebrafish).

ordered_pair(X,Y) :- sp(X),sp(Y),X@<Y.

make_filename(F) :-
  ordered_pair(X,Y),
  format(atom(F),"align-~w-~w",[X,Y]).

endprolog

all: $(bagof F,make_filename(F))

align-$X-$Y: $X.fa $Y.fa { ordered_pair(X,Y),
                           format("Matched ~w <-- ~n",[TARGET,DEPS]) },
    align $X.fa $Y.fa > $@

Now if we type...

biomake all

...then all non-identical ordered pairs will be compared (since we have required them to be ordered pairs, we get e.g. "mouse-zebrafish" but not "zebrafish-mouse"; the motivation here is that the align program is symmetric, and so only needs to be run once per pair).

In these examples, the goals between braces are tested after the dependencies. This means that any Prolog code in these braces can safely examine the dependency files (for example, you could constrain a rule to apply only if a dependency file was below a certain size, or in a certain file format). You can also place a Prolog goal (in braces) between the target list and the colon; it will then be tested after the target name has been matched, but before trying to build any dependencies. In such a goal, you can use the TARGET variable but not the DEPS variable.

Programming directly in Prolog

If you are a Prolog wizard who finds embedding Prolog in Makefiles too cumbersome, you can use a native Prolog-like syntax. Biomake looks for a Prolog file called Makeprog (or Makespec.pro) in your current directory. (If it's not there, it will try looking for a Makefile in GNU Make format. The following examples describe the Prolog syntax.)

Assume you have two file formats, ".foo" and ".bar", and a foo2bar converter.

Add the following rule to your Makeprog:

'%.bar' <-- '%.foo',
    'foo2bar $< > $@'.

Unlike makefiles, whitespace is irrelevant (except inside the quote-delimited shell and filesystem expressions). However, you do need the quotes, and remember the closing ".", as this is Prolog syntax.

If you prefer to stick with GNU Make syntax, the above Makeprog is equivalent to the following Makefile:

%.bar: %.foo
	   foo2bar $< > $@

To convert a pre-existing file "x.foo" to "x.bar" type:

biomake x.bar

Let's say we can go from a .bar to a .baz using a bar2baz converter. We can add an additional rule:

'%.baz' <-- '%.bar',
    'bar2baz $< > $@'.

Now if we type...

touch x.foo
biomake x.baz

...we get something like the following output:

% Checking dependencies: x.baz <-- [x.bar]
%  Checking dependencies: x.bar <-- [x.foo]
%   Nothing to be done for x.foo
%  Target x.bar not materialized - build required
 foo2bar x.foo > x.bar
%  x.bar built
% Target x.baz not materialized - build required
bar2baz x.bar > x.baz
% x.baz built

The syntax in the makeprog above is designed to be similar to the automatic variable syntax already used in makefiles. You can bypass this and use Prolog variables. The following form is functionally equivalent:

'$(Base).bar' <-- '$(Base).foo',
    'foo2bar $(Base).foo > $(Base).bar'.

The equivalent Makefile would be this...

$(Base).bar: $(Base).foo
	foo2bar $(Base).foo > $(Base).bar

...although strictly speaking, this is only equivalent if you are using Biomake; GNU Make's treatment of this Makefile isn't quite equivalent, since unbound variables don't work the same way in GNU Make as they do in Biomake (Biomake will try to use them as wildcards for pattern-matching, whereas GNU Make will just replace them with the empty string - which is also the default behavior for Biomake if they occur outside of a pattern-matching context).

Following the GNU Make convention, variable names must be enclosed in parentheses unless they are single letters.

Automatic translation to Prolog

You can parse a GNU Makefile (including Biomake-specific extensions, if any) and save the corresponding Prolog syntax using the -T option (long-form --translate).

Here is the translation of the Makefile from the previous section (lightly formatted for clarity):

sp(mouse).
sp(human).
sp(zebrafish).

ordered_pair(X,Y):-
 sp(X),
 sp(Y),
 X@<Y.

make_filename(F):-
 ordered_pair(X,Y),
 format(atom(F),"align-~w-~w",[X,Y]).

"all" <-- "$(bagof F,make_filename(F))".

"align-$X-$Y" <--
 ["$X.fa","$Y.fa"],
 {ordered_pair(X,Y),
  format("Matched ~w <-- ~n",[TARGET,DEPS])},
 "align $X.fa $Y.fa > $@".

Note how the list of dependencies in the second rule, which contains more than one dependency ($X.fa and $Y.fa), is enclosed in square brackets, i.e. a Prolog list (["$X.fa","$Y.fa"]). The same syntax applies to rules which have lists of multiple targets, or multiple executables.

The rule for target all in this translation involves a call to the Biomake function $(bagof ...), but (as noted) this function is just a wrapper for the Prolog bagof/3 predicate. The automatic translation is not smart enough to remove this layer of wrapping, but we can do so manually, yielding a clearer program:

sp(mouse).
sp(human).
sp(zebrafish).

ordered_pair(X,Y):-
 sp(X),
 sp(Y),
 X@<Y.

make_filename(F):-
 ordered_pair(X,Y),
 format(atom(F),"align-~w-~w",[X,Y]).

"all", {bagof(F,make_filename(F),DepList)} <-- DepList, {true}.

"align-$X-$Y" <--
 ["$X.fa","$Y.fa"],
 {ordered_pair(X,Y),
  format("Matched ~w <-- ~n",[TARGET,DEPS])},
 "align $X.fa $Y.fa > $@".

Make-like features

Biomake supports most of the functionality of GNU Make, including

Currently unsupported features of GNU Make

The following features of GNU Make are not (yet) implemented:

Please submit a GitHub issue if any of these are important to you.

Other differences from GNU Make

There are slight differences in the way variables are expanded, which arise from the fact that Biomake treats variable expansion as a post-processing step (performed at the last possible moment) rather than a pre-processing step (which is how GNU Make does it - at least partly).

Specifically, Biomake parses the Makefile, reading all variable and recipe declarations into memory, and only when the build begins are variables expanded. The only exception to this is when variables are used in conditional syntax, to control which parts of the Makefile are actually read: these variables are expanded at parse-time.

In contrast, GNU Make expands variables in dependency lists at parse time (along with conditional syntax), but expands variables in recipe bodies later.

This can cause differences between GNU and Biomake in situations where variables change value throughout the Makefile. These situations are usually counter-intuitive anyway, as the following example illustrates. This Makefile, which might naively be expected to print hello everybody, in fact prints hello world when run with make test, but goodbye world when run with biomake test:

A = hello
B = everybody

test: $A
	@echo $B

A = goodbye
B = world

hello goodbye:
	@echo $@

This example gets even more counterintuitive if we wrap the test recipe with conditional syntax. It still gives the same results, though: hello world when run with make test, and goodbye world when run with biomake test.

A = hello
B = everybody

ifeq ($B,everybody)
test: $A
	@echo $B
else
test:
	@echo Curioser and curioser
endif

A = goodbye
B = world

hello goodbye:
	@echo $@

Another consequence is that, when using Biomake, variable expansions must be aligned with the overall syntactic structure; they cannot span multiple syntactic elements. As a concrete example, GNU Make allows this sort of thing:

RULE = target: dep1 dep2
$(RULE) dep3

which (in GNU Make, but not biomake) expands to

target: dep1 dep2 dep3

That is, the expansion of the RULE variable spans both the target list and the start of the dependency list. To emulate this behavior faithfully, Biomake would have to do the variable expansion in a separate preprocessing pass - which would mean we couldn't translate variables directly into Prolog. We think it's worth sacrificing this edge case in order to maintain the semantic parallel between Makefile variables and Prolog variables, which allows for some powerful constructs.

The implementation of conditional syntax (ifeq, ifdef and the like) similarly requires that syntax to be aligned with the overall structure: you can only place a conditional at a point where a variable assignment, recipe, or include directive could go (i.e. at the top level of the Makefile grammar). Conditional syntax is implemented as a preprocessing step.

Unlike GNU Make, Biomake does not offer domain-specific language extensions in Scheme (even though this is one of the cooler aspects of GNU Make), but you can program it in Prolog instead - it's quite hackable.

Detailed build logic

The build logic for biomake should usually yield the same results as GNU Make, though there may be subtle differences. The GNU Make algorithm differs in the details.

Before attempting to build a target T using a rule R, Biomake performs the following steps:

If any of these tests fail, Biomake will backtrack and attempt to build the target using a different rule, or a different pattern-match to the same rule. If all the tests pass, Biomake will commit to using the rule, and will attempt to execute the recipe using the shell (or the queueing engine).

Note that the target goal is tested multiple times (to plan theoretical build paths) and so should probably not have side effects. The deps goal is tested later, and only once for every time the rule is bound, so it is a bit safer for the deps goal to have side effects.

Failure during execution of the recipe (or execution of any recipes in the dependency tree) will never cause Biomake to backtrack; it will either halt, or (if the -k command-line option was specified) soldier on obliviously.

Arithmetic functions

Biomake provides a few extra functions for arithmetic on lists:

MD5 hashes

Instead of using file timestamps, which are fragile (especially on networked filesystems), Biomake can optionally use MD5 checksums to decide when to rebuild files. Turn on this behavior with the -H option (long form --md5-hash).

Biomake uses the external program md5 to do checksums (available on OS X), or md5sum (available on Linux). If neither of these are found, Biomake falls back to using the SWI-Prolog md5 implementation; this does however require loading the entire file into memory (which may be prohibitive for large files).

Queues

To run jobs in parallel, locally or on a cluster, you need to specify a queueing engine using the -Q option (long form --queue-engine). Note that, unlike with GNU Make, multi-threading is not activated simply by specifying the number of threads with -j; you need -Q as well.

There are several queueing engines currently supported:

For Sun Grid Engine, PBS and Slurm, the paths to the relevant job control executables, and any arguments to those executables (such as the name of the queue that jobs should be run on), can be controlled using various command-line arguments. In particular, the --qsub-args command-line option (applying to all recipes) and the QsubArgs Prolog variable (on a per-recipe basis, in the target goal) can be used to pass parameters such as the queue name.

Here's an example of using QsubArgs:

my_target { QsubArgs = '--cores-per-socket=4' } : my_dependency
    do_something >$@

Note that QsubArgs has to be set in the target goal, not the deps goal (since the job is submitted to the queueing engine before the dependencies are guaranteed to have been built).

Similarly, you can use the QsubHeader variable (or the --qsub-header command-line option) to add header lines to the wrapper script that is submitted to the queue engine (for example, to provide queue configuration directives), or you can use QsubHeaderFile (or --qsub-header-file) to specify the filename of a header file to include.

The names of these Prolog variables for fine-grained queue configuration (QsubArgs, QsubHeader, QsubHeaderFile) are the same for Slurm as for SGE and PBS, even though the batch submission command for Slurm is sbatch and not qsub.

More

Ideas for future development: