Awesome

Dunst

<i>A highly configurable and lightweight notification daemon.</i>

music

Features
Building
Contributing
Documentation
Troubleshooting
Copyright

Features

⚙️ Highly customizable

Customize fonts, icons, timeouts, and more. Are you unhappy with the default shortcuts and colors? No worries, you can change these all with a simple configuration file tweak.

click the images to see the dunstrc

📜 Scripting

Run custom scripts on notifications matching a specified pattern. Have espeak read out your notifications, or play a song when your significant other signs on in pidgin!

📋 Rules

Change the look or behavior of notifications matching a specified pattern. You could use this to change the color of message notifications from your favorite jabber buddies, or to prevent important work email notifications from disappearing until you manually dismiss them.

⏸️ Pause

If you want to take a break and not receive any notifications for a while, just pause dunst. All notifications will be saved for you to catch up later.

Additionally, you can set a numeric pause level, which allows you to pause dunst selectively for some notifications, where more urgent notifications get through, but less urgent stay paused.

🕘 History

Catch an unread notification disappearing from the corner of your eye? Just tap a keyboard shortcut to replay the last notification, or continue tapping to see your notification history.

Documentation

Most documentation can be found in dunst's man pages. In dunst(1) contains some general instructions on how to run dunst and in dunst(5) all of dunst's configuration options are explained.

On the dunst wiki you can find guides and installation instructions and on the dunst website there is a FAQ with common issues.

Installation

Dunst is available in many package repositories. If it's not available in your distro's repositories, don't worry, it's not hard to build it yourself.

Dependencies

dbus (runtime)
libxinerama
libxrandr
libxss
glib
pango/cairo
gdk-pixbuf
libnotify (can build without, for dunstify, see make parameters)
wayland-client (can build without, see make parameters)
wayland-protocols (optional, for recompiling protocols)
xdg-utils (optional, xdg-open is the default 'browser' for opening URLs)
jq (optional, for installed completions and tools in contrib)
busctl (optional, for dunstctl rules and dunstctl history)

The names will be different depending on your distribution.

Building

git clone https://github.com/dunst-project/dunst.git
cd dunst
make
sudo make install

Make parameters

DESTDIR=<PATH>: Set the destination directory of the installation. (Default: /)
PREFIX=<PATH>: Set the prefix of the installation. (Default: /usr/local)
BINDIR=<PATH>: Set the dunst executable's path (Default: ${PREFIX}/bin)
DATADIR=<PATH>: Set the path for shared files. (Default: ${PREFIX}/share)
BASHCOMPLETIONDIR=<PATH>: Set the path for installation of bash completion files. (Default: ${DATADIR}/bash-completion/completions)
FISHCOMPLETIONDIR=<PATH>: Set the path for installation of fish completion files. (Default: ${DATADIR}/fish/vendor_completions.d)
ZSHCOMPLETIONDIR=<PATH>: Set the path for installation of zsh completion files. (Default: ${DATADIR}/zsh/site-functions)
SYSCONFDIR=<PATH>: Set the base directory for system config files. (Default: ${PREFIX}/etc/xdg)
SYSCONFFILE=<PATH>: Set the absolute path to which the default dunstrc shall be installed. (Default: ${SYSCONFDIR}/dunst/dunstrc)
SYSCONF_FORCE_NEW=(0|1): Overwrite existing ${SYSCONFFILE}. (Default: 0 (don't overwrite))
MANDIR=<PATH>: Set the prefix of the manpage. (Default: ${DATADIR}/man)
SYSTEMD=(0|1): Disable/Enable the systemd unit. (Default: autodetect systemd)
WAYLAND=(0|1): Disable/Enable wayland support. (Default: 1 (enabled))
X11=(0|1): Disable/Enable X11 support. (Default: 1 (enabled))
DUNSTIFY=(0|1): Disable/Enable the libnotify dunstctl utility. (Default: 1 (enabled))
COMPLETIONS=(0|1): Disable/Enable installation of shell completions. (Default: 1 (enabled))
SERVICEDIR_SYSTEMD=<PATH>: The path to put the systemd user service file. Unused, if SYSTEMD=0. (Default: ${PREFIX}/lib/systemd/user)
SERVICEDIR_DBUS=<PATH>: The path to put the dbus service file. (Default: ${DATADIR}/dbus-1/services)
EXTRA_CFLAGS=<FLAGS>: Additional flags for the compiler.

Make sure to run all make calls with the same parameter set. So when building with make PREFIX=/usr, you have to install it with make PREFIX=/usr install, too.

Either X11 or WAYLAND should be set, otherwise dunst will not compile.

Notes on default of XDG_CONFIG_DIRS

Dunst uses a different default (${SYSCONFDIR}) for XDG_CONFIG_DIRS at runtime. This is a slight digression from the recommended value in the XDG Base Directory Specification (/etc/xdg), because the default config file gets installed to ${SYSCONFDIR}/dunst/dunstrc to avoid conflicts with /etc/xdg/dunst/dunstrc which might have been installed from a distribution repository. If you do want dunst to use the spec's recommended default, set XDG_CONFIG_DIR=/etc/xdg at runtime or SYSCONFDIR=/etc/xdg at compile time.

Notes on SYSCONFFILE

Changing SYSCONFFILE does not affect the search for config files, meaning it will not take effect if you choose to install dunstrc to a location that cannot be found by the algorithm outlined in the FILES section of dunst(1).

make install will not overwrite an already existing ${SYSCONFFILE} (i.e. /usr/local/etc/xdg/dunst/dunstrc), see SYSCONF_FORCE_NEW above. This is so you do not lose local changes to said file on upgrade. However, it is recommended to leave that file untouched and use a more important config location to override settings, see the FILES section in dunst(1) for more details.

make uninstall will not remove ${SYSCONFFILE}, use make uninstall-purge if you do want it removed as well.

Contributing

Contributions are very welcome. Before contributing, make sure to look at the contribution documentation in HACKING.md.

Make sure you test your code and where possible add automated tests. These tests are also checked on memory leaks (with make test-valgrind).

Troubleshooting

Cannot set settings via command line

This functionality was removed during the refactor. It might be re-added later in some form. See #940 for details.

Bug reports

Please use the issue tracker provided by GitHub to send us bug reports or feature requests.

Screenshots

Maintainers

Please only refer to active maintainers for issues and bugs.

Ex-Maintainers

Author

Written by Sascha Kruse dunst@knopwob.de