Awesome

Forked version of Generator for Dactyl & Dactyl Manuform Keyboards

This is a fork of the ibnuba fork of the tshort fork of the Dactyl, a parameterized, split-hand, concave, columnar, ergonomic keyboard.

If you want to read the old ibnuba README.md, go here.

If you want to read the old old tshort README.md, go here.

Goals

1. Improve strength of kailh hotswap holder
2. Add Support for glueing LED strips to provide per-key LED RGB backlighting
3. Tweak row, and column curvatures for smaller hands.

Generate OpenSCAD and STL models

OLD

• Run lein repl
• In the repl run (load-file "src/dactyl_keyboard/common.clj") (load-file "src/dactyl_keyboard/manuform.clj")
• This will regenerate the things/*.scad files
• Use OpenSCAD to open a .scad file.
• Make changes to design, repeat load-file, OpenSCAD will watch for changes and rerender.
• When done, use OpenSCAD to render, then export model STL files which can be printed by 3d printer slicing software.

NEW (faster)

• Run lein auto generate
• This will regenerate the things/*.scad files whenever the .clr file is saved
• Use OpenSCAD to open a .scad file.
• Make changes to design in src/dactyl_keyboard/dactyl.clj, open scad files will auto regenerate, OpenSCAD will rerender.
• When done, use OpenSCAD to render, then export model STL files which can be printed by 3d printer slicing software.

Batch (parallel) Processing

• Edit the path for OpenSCAD in create-models.sh if needed
• Change any other settings for which files you want to render
• Wait for STL files to appear (this may take a minute or two)

License

Copyright © 2015-2020 Matthew Adereth, Tom Short, Ibnu D. Aji, Derek Nheiley et. al.

The source code for generating the models (everything excluding the things/ and resources/ directories is distributed under the GNU AFFERO GENERAL PUBLIC LICENSE Version 3. The generated models and PCB designs are distributed under the Creative Commons Attribution-NonCommercial-ShareAlike License Version 3.0.