Awesome
Skeletyl
This is a fork of the Skeletyl originally designed by HID-Technologies (further developed by BastardKB into Skeletyl V2).
Changes / Design Goals
- Increase pinky column stagger
- Reinforce case connecting pinky column
- (Ambitious) Adjust thumb angles and position
(Yeah right) make a 3x5 versionsee TBK Mini
Timelapse Build
Wiring
For re-using dactyl manuform firmware this wiring should be backwards compatible, with some minor difference to the thumb cluster.
Flashing
- Install qmk toolbox
- Press reset button on controller (short RST pin to GND pin)
- Find hex file you want to flash and press flash in UI
Skeleton-Dactyl-Mini
Made to be used with
- 4mm tapered screws (optional if not using bottom plate)
- 4mm long screw inserts (optional if not using bottoms plate)
- USB-C microcontroller
- 3.5mm audio jack
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.