Awesome

Yeelight Shell Scripts

Control Xiaomi Mi Yeelight (RGB) with shell scripts. Should work under any recent Linux with a bash or zsh - sorry, don't know if that works under Windows/CygWin or Macos - you might need to rewrite the last line in the yeelight.sh script (e.g. by pipeing the output to netcat).

License

Licensed under the Apache License, Version 2.0 (the "License"); you may not use the files in this repository except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Setup

You need to connect the light using the Yeelight app (or using any other appropriate way) to your network. Then enable Developer Mode (or LAN Control Mode in the current version of the app) for the light. This setting may need to be reset after a firmware update. You should also make sure that your DHCP server always assigns the same IP address to the light.

Now edit the yeelight-ips file and enter the IP address of each light you have, separated by a space.

Running

Each of the yeelight-*.sh scripts has a specific function that is hopefully quite easy to guess from it's name. All the scripts call the yeelight.sh script that really does the job. Each script requires several parameters - calling them without any will give you a usage prompt. All scripts require the ID of a light - this is the position of the light you entered in the setup part. The first light has the ID 0.

Examples

Switch on (to last used values)

./yeelight-scene.sh 0 On

Switch on using 4300 Kelvin

./yeelight-scene.sh 0 4300

Switch on Rainbow

./yeelight-scene.sh 0 Rainbow

Switch on Disco

./yeelight-scene.sh 0 Disco

Switch on Disco with 120ms

DISCOSPEED=120 ./yeelight-scene.sh 0 Disco

Set brightness to 50%

./yeelight-brightness.sh 0 50

Set RGB color to BLUE (using absolut number, decimal and hex triples)

./yeelight-rgb.sh 0 255
./yeelight-rgb.sh 0 0,0,255
./yeelight-rgb.sh 0 x0,0,ff

Set hue (hsv) to 32 (yellow) with 80% brightness (of that color - 0 means full white)

./yeelight-hue.sh 0 32 80

Set color temperature to 6500 Kelvin

./yeelight-colortemp.sh 0 6500

Integration with redshift

yeelight-redshift.sh is a script that allows your lamp to change color temperature simultaneously with your monitor if you use redshift. Just like redshift, this script eases strain on your eyes if you use your computer at night. To use this script you need to copy ./samples/yeelight-redshift.timer and ./samples/yeelight-redshift.service to /etc/systemd/system/, change scrip location in yeelight-redshift.service. Then run sudo systemctl daemon-reload, sudo systemctlt enable yeelight-redshift.timer, sudo systemctl start yeelight-redshift.timer.

You can also change some values in yeelight-redshift.sh if you need warmer color.

For the script to work you need to have redshift installed.

Contributed by Maxim Mishukov

HA-Bridge and Amazon Alexa

I am personally using this scripts on a Synology NAS with a running HA-Bridge. Since the scripts don't require any additional tool or access rights you can just execute them directly from the HA-Bridge. Make sure the scripts are executable (chmod +x *.sh) and either you are using the full path or put them somewhere inside $PATH, for example /usr/local/bin/.

I have setup different scenes as devices for the same light. There is a bedroom device which can be switched on/off and use the dim feature - this is just a normal setup. And there is also a sleep and a rainbow device that addresses the same light to apply this scenes.

yeelight-disco.sh is a wrapper that only accepts one value - I use ${intensity.percent} from HA-Bridge. There is some math done with that value to fit into the 2-99% range (Strange: I can't tell Alexa to use 1 or 100%) and still have some 'disco-speed'. Adjust to your needs.