Home

Awesome

Elasticsearch mode for Emacs

Provides a major mode for editing ES query examples. Better highlighting and indention than sh-mode or js-mode.

It is intended to be a mixture of the three modes as well as mimicing some of the highlighting from Kibana's Dev Tools Console.

You can also think of it as Kibana's Console-envy for Emacs users.

Installation

es-mode is available in the MELPA repository. Do this, if MELPA isn't already in your sources:

(require 'package)
(add-to-list 'package-archives
             '("MELPA" . "https://melpa.org/packages/" ))

Then run M-x package-refresh-contents to load the contents of the new repository, and M-x package-install RET es-mode RET to install es-mode.

Usage

(add-to-list 'load-path "/path/to/es-mode-dir")
(autoload 'es-mode "es-mode.el"
  "Major mode for editing Elasticsearch queries" t)
(add-to-list 'auto-mode-alist '("\\.es$" . es-mode))

You can now open a file with an .es extension and es-mode will automatically load..

Keyboard Shortcuts

KeyActionDescription
C-c C-ces-execute-request-dwimExecute the request you're currently on
C-c C-pes-goto-previous-requestGo to the previous request
C-c C-nes-goto-next-requestGo to the next request
C-c M-wes-copy-asCopy the request as a curl request
C-c C-ues-set-endpoint-urlSet the ES endpoint requests will be executed against
C-c RETes-set-request-methodSet the rest method type (only for non-prefixed requests)
C-c s(requires yasnippet)Insert a snippet for searching
C-c i(requires yasnippet)Insert a snippet for new index creation

Features

Using hide-show mode in results buffers

If you would like to enabled hs-minor-mode automatically on ES results buffers, use the following:

(add-hook 'es-result-mode-hook 'hs-minor-mode)

Example

You can specify requests with two different formats:

With parameters

In the document, specify parameters similar to Console, like so:

POST /myindex/_search?pretty
{
  "query": {
    "match_all": {}
  }
}

Hitting C-c C-c anywhere on the parameter or body of the request will execute the request, opening a response buffer. The base-url can be configured by customizing the es-default-url var.

You also don't have to provide the leading "/", similar to Console (I personally think the leading "/" looks better though), like this:

POST myindex/_search?pretty
{
  "query": {
    "match_all": {}
  }
}

If you do not want to specify ?pretty every time, you can customize the es-always-pretty-print var (defaults to nil).

Without parameters (deprecated)

Without any parameters, you can specify a request:

{
  "query": {
    "match_all": {}
  }
}

With the request region highlighted or inside the query structure, hit C-c C-c to execute it. The first time you do this you will be prompted for the URL and HTTP method. You can also set the URL with C-c C-u and the method with C-c C-m.

This is deprecated in favor of the console-like syntax, as it increases complexity for maintaining es-mode.

Self signed certificates

If your ES endpoint has TLS enabled with self signed certificates (this is insecure!) you'll need to make curl ignore those. There are two ways:

  1. Specify --insecure in the Emacs variable request-curl-options.
  2. Create a ~/.curlrc containing --insecure (see the curl man page).

Screenshot

See test.es, test2.es, and all.org, here's a screenshot from my theme:

picture of es-mode

And here's an example of the completion of queries/filters:

picture of es-mode completion

Org-babel support

One of the main reasons I started this was better highlighting and indention for org-babel. So add the snippet below to your .emacs:

(org-babel-do-load-languages
 'org-babel-load-languages
 '((elasticsearch . t)))

And then you will be able to hit C-c C-c on code like this in your org-mode file:

#+BEGIN_SRC es
POST /_search?pretty
{
  "query": {
    "match_all": {}
  }
}
#+END_SRC

OR (without parameters):

#+BEGIN_SRC es :method POST :url localhost:9200/_search?pretty
{
  "query": {
    "match_all": {}
  }
}
#+END_SRC

org-mode uses the arguments :url and :method to know where and how to send a query. If they are not present org-mode will use es-default-url and es-default-request-method instead.

Tangling these blocks will produce <filename>.es, if you specify the filename with :tangle foo.sh, es-mode will instead create a curl request for the body of the request.

Generating org-mode tables from aggregations

Es-mode supports rudimentary table creation from aggregations using the :tablify header parameter. For example, consider the following aggregations:

#+BEGIN_SRC es :tablify prices :results raw table
POST /test/doc/_search
{
  "aggs" : {
    "prices" : {
      "histogram" : {
        "field" : "price",
        "interval" : 20,
        "min_doc_count": 0
      }
    }
  },
  "size": 0
}
#+END_SRC

#+RESULTS:
| key | document count |
|-----+----------------|
|   0 |              4 |
|  20 |              0 |
|  40 |              1 |
|  60 |              2 |
|  80 |              2 |
| 100 |              1 |
| 120 |              0 |
| 140 |              0 |
| 160 |              2 |

Note that the "tablify" argument must be the name of the aggregation to be tablified, in this example, "prices" is the name of the argument.

This also works for terms aggregations:

#+BEGIN_SRC es :tablify my_terms_agg :results raw table
POST /test/doc/_search
{
  "aggs" : {
    "my_terms_agg" : {
      "terms" : {
        "field" : "type"
      }
    }
  },
  "size": 0
}
#+END_SRC

#+RESULTS:
| key      | document count |
|----------+----------------|
| eggplant |              5 |
| foo      |              4 |
| widget   |              2 |
| cog      |              1 |

If you are using org-mode 8.3.1 or later, you can generate pretty ASCII graphs from org-mode using orgtbl-ascii-plot like so (hit C-c C-c on the TBLFM line to generate the graph):

#+RESULTS:
| key | document count |            |
|-----+----------------+------------|
|   0 |              4 | WWWWWWWWWl |
|  20 |              0 |            |
|  40 |              1 | WWc        |
|  60 |              2 | WWWWV      |
|  80 |              2 | WWWWV      |
| 100 |              1 | WWc        |
| 120 |              0 |            |
| 140 |              0 |            |
| 160 |              2 | WWWWV      |
#+TBLFM: $3='(orgtbl-ascii-draw $2 0 5)

Or:

#+RESULTS:
| key      | document count |              |
|----------+----------------+--------------|
| eggplant |              5 | WWWWWWWWWWWW |
| foo      |              4 | WWWWWWWWWl   |
| widget   |              2 | WWWWV        |
| cog      |              1 | WWc          |
#+TBLFM: $3='(orgtbl-ascii-draw $2 0 5)

Be sure to pass the correct minimum and maximum values for the table (in this example, 0 and 5) to the orgtbl-ascii-draw method.

Passing JSON through jq

In org-mode you can also reduce the size of results by passing them through the jq command-line tool. For example, compare the output of these two different org blocks:

#+BEGIN_SRC es
GET /
{}
#+END_SRC

#+RESULTS:
#+begin_example
{
  "status" : 200,
  "name" : "Everyman",
  "version" : {
    "number" : "1.3.2",
    "build_hash" : "dee175dbe2f254f3f26992f5d7591939aaefd12f",
    "build_timestamp" : "2014-08-13T14:29:30Z",
    "build_snapshot" : false,
    "lucene_version" : "4.9"
  },
  "tagline" : "You Know, for Search"
}
#+end_example

And the same thing, but passed through the jq tool, extracting the "name" and "version.number" fields:

#+BEGIN_SRC es :jq .name, .version.number
GET /
{}
#+END_SRC

#+RESULTS:
: "Everyman"
: "1.3.2"

You can use this to return only a certain hit, or the score of a hit, etc, easily, so you can format the output as desired. See the full jq manual for how to use jq.

es-mode uses jq in the PATH, however, if you want to specify an absolute path you can customize the es-jq-path var as you like.

jq will only be run if the response is an HTTP 20[0-9].

Variable Substitution

es-mode includes support for variable substitution in org-babel source blocks. The variable references in the body should be in the form ${var-name}.

#+BEGIN_SRC es :var index="theindex"
POST /${index}/_search?pretty
{
  "query": {
    "match_all": {}
  }
}
#+END_SRC

Vars can also be used to use the results from other org-babel blocks.

In the example below, the first source block searches the index child-docs for documents from the past month and jq is used to select the parent-ids from the hits that are returned.

The second source block takes the parent-ids and binds it to the variable ids in the header of the source block (:var ids=parent-ids). When the code is run ${ids} is replaced with the JSON array prior to executing the search request against the parent-docs index.

#+NAME: parent-ids
#+BEGIN_SRC es :jq "[.hits.hits[]._source.\"parent-id\"]"
  GET /child-docs/_search?pretty
  {
    "query": {
        {"range": {"time": {"gte": "now-1M/d"}}}
    },
    "_source": "parent-id"
  }
#+END_SRC

#+RESULTS: parent-ids
#+begin_example
[
  "id1",
  "id2",
  "id3"
]
#+end_example

#+BEGIN_SRC es :var ids=parent-ids
  GET /parent-docs/_search?pretty
  {
    "query": {
      {"ids": {"values": ${ids}}}
    }
  }
#+END_SRC

#+RESULTS:
#+begin_example
{
  "took" : 227,
  "timed_out" : false,
  "_shards" : {
    "total" : 4,
    "successful" : 4,
    "failed" : 0
  },
  "hits" : {
    "total" : 3,
    "max_score" : 5.3673162,
    "hits" : [
      {
        "_index" : "parent-docs",
        "_type" : "t",
        "_id" : "id1",
        "_score" : 5.3673162,
        "_source" : {
          ...
        }
      },
      {
        "_index" : "parent-docs",
        "_type" : "t",
        "_id" : "id2",
        "_score" : 5.3673162,
        "_source" : {
          ...
        }
      },
      {
        "_index" : "parent-docs",
        "_type" : "t",
        "_id" : "id3",
        "_score" : 5.3673162,
        "_source" : {
           ...
        }
      }
    ]
  }
}
#+end_example


Elasticsearch Command Center

es-mode includes a mode called the "Elasticsearch Command Center", which is meant for monitoring your cluster. This provides a graphical representation of what's happening in the cluster.

To invoke it, simply do M-x es-command-center. ES-CC will automatically refresh at es-cc-refresh-interval seconds, check out M-x customize-group es-cc to see all of the customization options.

Here's a screenshot of what it looks like:

picture of es-command-center

Feedback

This is my first major mode for Emacs, feedback is welcome, especially pull requests that show me what I'm doing wrong.