Home

Awesome

WARNING: THIS CODE IS VERY RAW AND PROBABLY VERY BUGGY!

Introduction

This is the Sk3wlDbg plugin for IDA Pro. It's purpose is to provide a front end for using the Unicorn Engine to emulate machine code that you are viewing with IDA.

The plugin installs as an IDA debugger which you may select whenever you open an IDA database containing code supported by Unicorn. Currently supported architectures include:

BUILDING:

The plugin is dependent on the Unicorn engine. IDA versions 6.x and older (pre 7.0) are buit as 32-bit binaries. If you are using one of these versions of IDA you MUST have a 32-bit build of the Unicorn library for your IDA platform (Windows, Linux, OS X). If you are using IDA version 7.0 or later, you MUST have a 64-bit build of Unicorn.

On all platforms you should clone sk3wldbg into your IDA SDK plugins sub-directory so that you end up with $IDASDKDIR/plugins/sk3wldbg because the build files all use relative paths to find the IDA header files.

Building Unicorn for Linux / OSX

Follow make.sh with make install

Build sk3wldbg for Linux / OS X:

Use the include Makefile to build the plugin. You may need to adjust the paths that get searched to find your IDA installation ("/Applications/IDA Pro N.NN" is assumed on OSX and /opt/ida-N.NN is assumed on Linux, were N.NN is derived from the name of your IDA SDK directory eg idasdk695 and should match your IDA version number). This is required to successfully link the plugin. Note that the Makefile assumes that the Unicorn library headers have been copied into the sk3wldbg directory alongside the plugin source files (this is already done in the git repo). If you want to switch to using the actual Unicorn headers, make sure you update the Makefile.

$ cd $IDASDKDIR/plugins/sk3wldbg $ make

Compiled binaries will end up in $IDASDKDIR/plugins/sk3wldbg/bin

LINUX
         -------------------------------------------
         |        ida        |        ida64        |
         -------------------------------------------
IDA 6.x  |                   |                     |
 plugin  | sk3wldbg_user.plx | sk3wldbg_user.plx64 |
         -------------------------------------------
IDA 7.x  |                   |                     |
 plugin  | sk3wldbg_user.so  | sk3wldbg_user64.so  |
         -------------------------------------------

OS/X
         ------------------------------------------------
         |        ida           |        ida64          |
         ------------------------------------------------
IDA 6.x  |                      |                       |
 plugin  | sk3wldbg_user.pmc    | sk3wldbg_user.pmc64   |
         ------------------------------------------------
IDA 7.x  |                      |                       |
 plugin  | sk3wldbg_user.dylib  | sk3wldbg_user64.dylib |
         ------------------------------------------------

Copy the plugin(s) into your <IDADIR>/plugins directory and Sk3wlDbg will be listed as an available debugger for all architectures supported by Unicorn.

Build Unicorn for Windows

Unicorn include unicorn.sln which may be used to build both 32 and 64-bit versions of Unicorn. The necessary binaires end up in unicorn/msvc/distro/Win32 and unicorn/msvc/distro/x86. You will need unicorn.lib and unicorn.dll for your version of IDA (32 or 64-bit). Copy the appropriate unicorn.lib into your sk3wldbg git tree at sk3wldbg/lib/x86 or sk3wldbg/lib/x64.

Build sk3wldbg for Windows

Build with Visual Studio C++ 2013 or later using the included solution (.sln) file (sk3wlbdg.sln). Several build targets are available depending on which version of IDA you are using:

         -------------------------------------------
         |        ida        |        ida64        |
         -------------------------------------------
IDA 6.x  |   Release/Win32   |  Release64/Win32    |
 plugin  | sk3wldbg_user.plw | sk3wldbg_user.p64   |
         -------------------------------------------
IDA 7.x  |    Release/x64    |   Release64/x64     |
 plugin  | sk3wldbg_user.dll | sk3wldbg_user64.dll |
         -----------------------------------------

Note that the project configuration assumes that the Unicorn library headers have been copied into the sk3wldbg directory alongside the solution file (this is already done in the git repo). If you want to switch to using the actual Unicorn headers, make sure you update the Visual Studio project settings.

Copy the plugin(s) into your <IDADIR>/plugins directory and Sk3wlDbg will be listed as an available debugger for all architectures supported by Unicorn.

Note that the unicorn dll needs to be found in your PATH or copied into your IDA installation directory.

INSTALLATION

Assuming you have installed IDA to $IDADIR, install the plugin by copying the compiled binaries from $IDASDKDIR/bin/plugins to $IDADIR/plugins (Linux/Windows) or $IDADIR/idabin/plugins (OS X). Windows users should also copy unicorn.dll into $IDADIR. Linux and OS X users should make sure they have installed the Unicorn shared library into an appropriate location on their respective systems (/usr/local/lib often works). This should already be taken care of if you build and install Unicorn from source.

Pre-built binaries:

As an alternative to building the plugin yourself, pre-built binaries for IDA 6.95 (Windows, Linux, OS X) are available in the bins directory. Make sure that you have a suitable Unicorn installed for your platform.

USING THE PLUGIN

With the plugin installed, open a binary of interest in IDA and select Sk3wlDbg as your debugger (Debugger/Switch debugger). If Sk3wlDbg does not appear as an available debugger, it has either not been installed correctly, the Unicorn shared library can't be found, or the current processor type is not supported by the plugin.

No options are currently recognized by the plugin. When you launch the debugger you will be asked whether you wish to begin execution at the cursor location or at the program's advertised entry point. You should probably also set some breakpoints to make sure you gain control of the debugger at some point.

The plugin contains very minimalist ELF32/64 and PE/PE32+ loaders to load the file image into the Unicorn emulator instance. Outside of these formats the plugin simply copies the contents of your IDA sections into the emulator. You currently also get a stack and that's about it.

For ELF64/x86_64, the emulator assumes Linux and sets up a minimal trampoline from ring 0 to ring 3 at debug start. Additionaly ring 0 code is installed to handle sysenter and provide a sysexit back to ring 3. A conditional breakpoint can be installed at the tail end of the systenter code (marked by a nop) to examine the syscall arguments and, if desired, manipulate the process state before resuming execution. See linux_kernel_x64.asm and linux_x64_syscall_bpcond.py for ideas.

Future updates will provide similar ring 0 stubs for ELF32/x86/Linux and PE32+/x86_64/Windows.

THINGS THAT WORK (> 0% of the time)

     int64 sk3wl_mmap(int64 base, long size, int perms) where perms are a combination of:
         #define SEGPERM_EXEC  1         ///< Execute
         #define SEGPERM_WRITE 2         ///< Write
         #define SEGPERM_READ  4         ///< Read
     void sk3wl_munmap(int64 base, long size)

sk3wl_mmap may be used to map new regions of memory into an emulated unicorn process. These may be invoked from python via the eval_idc_expr function:

         idaapi.eval_idc_expr(idaapi.idc_value_t(), BADADDR, "sk3wl_mmap(0x41414000, 0x1000, 7)")

THINGS THAT DON'T WORK (because they are not yet implemented)

OTHER FUTURE WORK