Home

Awesome

Docker Compose setup for CKAN

1. Overview

This is a set of configuration and setup files to run a CKAN site.

The CKAN images used are from the official CKAN ckan-docker repo

The non-CKAN images are as follows:

The site is configured using environment variables that you can set in the .env file.

2. Installing Docker

Install Docker by following the following instructions: Install Docker Engine on Ubuntu

To verify a successful Docker installation, run docker run hello-world and docker version. These commands should output versions for client and server.

3. docker compose vs docker-compose

All Docker Compose commands in this README will use the V2 version of Compose ie: docker compose. The older version (V1) used the docker-compose command. Please see Docker Compose for more information.

4. Install (build and run) CKAN plus dependencies

Base mode

Use this if you are a maintainer and will not be making code changes to CKAN or to CKAN extensions

Copy the included .env.example and rename it to .env. Modify it depending on your own needs.

[!WARNING] There is a sysadmin user created by default with the values defined in CKAN_SYSADMIN_NAME and CKAN_SYSADMIN_PASSWORD (ckan_admin and test1234 by default). These must be changed before running this setup as a public CKAN instance.

To build the images:

docker compose build

To start the containers:

docker compose up

This will start up the containers in the current window. By default the containers will log direct to this window with each container using a different colour. You could also use the -d "detach mode" option ie: docker compose up -d if you wished to use the current window for something else.

At the end of the container start sequence there should be 6 containers running:

$ docker compose ps
NAME                       IMAGE                              COMMAND                  SERVICE      CREATED         STATUS                   PORTS
ckan-docker-ckan-1         ckan-docker-ckan                   "/srv/app/start_ckan…"   ckan         4 minutes ago   Up 3 minutes (healthy)   5000/tcp
ckan-docker-datapusher-1   ckan/ckan-base-datapusher:0.0.20   "sh -c 'uwsgi --plug…"   datapusher   4 minutes ago   Up 4 minutes (healthy)   8800/tcp
ckan-docker-db-1           ckan-docker-db                     "docker-entrypoint.s…"   db           4 minutes ago   Up 4 minutes (healthy)
ckan-docker-nginx-1        ckan-docker-nginx                  "/bin/sh -c 'openssl…"   nginx        4 minutes ago   Up 2 minutes             80/tcp, 0.0.0.0:8443->443/tcp
ckan-docker-redis-1        redis:6                            "docker-entrypoint.s…"   redis        4 minutes ago   Up 4 minutes (healthy)
ckan-docker-solr-1         ckan/ckan-solr:2.10-solr9          "docker-entrypoint.s…"   solr         4 minutes ago   Up 4 minutes (healthy)

After this step, CKAN should be running at CKAN_SITE_URL (by default https://localhost:8443)

Development mode

Use this mode if you are making code changes to CKAN and either creating new extensions or making code changes to existing extensions. This mode also uses the .env file for config options.

To develop local extensions use the docker-compose.dev.yml file:

To build the images:

docker compose -f docker-compose.dev.yml build

To install extensions from the src directory:

docker compose -f docker-compose.dev.yml run -u root ckan-dev ./install_src.sh

To start the containers:

docker compose -f docker-compose.dev.yml up

See CKAN images for more details of what happens when using development mode.

Create an extension

You can use the ckan extension instructions to create a CKAN extension, only executing the command inside the CKAN container and setting the mounted src/ folder as output:

docker compose -f docker-compose.dev.yml exec -u `stat -c '%u' src` -e HOME=/srv/app/src_extensions ckan-dev ckan generate extension --output-dir /srv/app/src_extensions

Extension's name [must begin 'ckanext-']: ckanext-mytheme
Author's name []: Joe Bloggs
Author's email []: joeb@example.com
Your Github user or organization name []: example
Brief description of the project []: My CKAN theme
List of keywords (separated by spaces) [CKAN]:
Do you want to include code examples? [y/N]: y

Written: /srv/app/src_extensions/ckanext-mytheme

The new extension files and directories are created in the /srv/app/src_extensions/ folder in the running container. They will also exist in the local src/ directory as local /src directory is mounted as /srv/app/src_extensions/ on the ckan container.

Please note that you will need to change the stat command to stat -f '%u' src on Mac OS rather than stat -c '%u' src which is specific to GNU stat (ie: Linux)

Running HTTPS on development mode

Sometimes is useful to run your local development instance under HTTPS, for instance if you are using authentication extensions like ckanext-saml2auth. To enable it, set the following in your .env file:

  USE_HTTPS_FOR_DEV=true

and update the site URL setting:

  CKAN_SITE_URL=https://localhost:5000

After recreating the ckan-dev container, you should be able to access CKAN at https://localhost:5000

Remote Debugging with VS Code

Visual Studio Code is a free IDE that includes remote debugging for Python applications. To debug CKAN you must enable debugpy for your development instance in your .env file:

  USE_DEBUGPY_FOR_DEV=true

Then start the containers in development mode and launch VS Code.

In VS Code:

  1. Install the "Dev Container" extension: press CTRL+SHIFT+X, type "dev container", click "install"
  2. Click the "Open a Remote Window" button in the bottom-left of the VS Code window
  3. Click "Attach to Running Container..." and select your ckan-dev container, e.g. "ckan-docker-ckan-dev-1"
  4. Click the "Run and Debug" icon on the left panel then "create a launch.json", select "Python Debugger", "Remote Attach", host "localhost" and port "5678"
  5. Press F5 or click the "Run" menu and "Start Debugging"

You can now set breakpoints and remote debug your CKAN development instance.

Updating the environment file for development mode

The Docker Compose environment .env file by default is set up for production mode. There are a few changes needed if you would like to run in Development mode:

  1. Change the CKAN_SITE_URL variable to be: http://localhost:5000
  2. Update the CKAN__DATAPUSHER__CALLBACK_URL_BASE variable to use the ckan-dev container name: http://ckan-dev:5000

5. CKAN images

ckan images

The Docker image config files used to build your CKAN project are located in the ckan/ folder. There are two Docker files:

Extending the base images

The CKAN base images are built from https://github.com/ckan/ckan-docker-base/

You can modify the docker files to build your own customized image tailored to your project, installing any extensions and extra requirements needed. For example here is where you would update to use a different CKAN base image ie: ckan/ckan-base:<new version>

To perform extra initialization steps you can add scripts to your custom images and copy them to the /docker-entrypoint.d folder (The folder should be created for you when you build the image). Any *.sh and *.py file in that folder will be executed just after the main initialization script (prerun.py) is executed and just before the web server and supervisor processes are started.

For instance, consider the following custom image:

ckan
├── docker-entrypoint.d
│   └── setup_validation.sh
├── Dockerfile
└── Dockerfile.dev

We want to install an extension like ckanext-validation that needs to create database tables on startup time. We create a setup_validation.sh script in a docker-entrypoint.d folder with the necessary commands:

#!/bin/bash

# Create DB tables if not there
ckan -c /srv/app/ckan.ini validation init-db

And then in our Dockerfile.dev file we install the extension and copy the initialization scripts:

FROM ckan/ckan-base:2.9.7-dev

RUN pip install -e git+https://github.com/frictionlessdata/ckanext-validation.git#egg=ckanext-validation && \
    pip install -r https://raw.githubusercontent.com/frictionlessdata/ckanext-validation/master/requirements.txt

COPY docker-entrypoint.d/* /docker-entrypoint.d/

NB: There are a number of extension examples commented out in the Dockerfile.dev file

Applying patches

When building your project specific CKAN images (the ones defined in the ckan/ folder), you can apply patches to CKAN core or any of the built extensions. To do so create a folder inside ckan/patches with the name of the package to patch (ie ckan or ckanext-??). Inside you can place patch files that will be applied when building the images. The patches will be applied in alphabetical order, so you can prefix them sequentially if necessary.

For instance, check the following example image folder:

ckan
├── patches
│   ├── ckan
│   │   ├── 01_datasets_per_page.patch
│   │   ├── 02_groups_per_page.patch
│   │   ├── 03_or_filters.patch
│   └── ckanext-harvest
│       └── 01_resubmit_objects.patch
├── setup
├── Dockerfile
└── Dockerfile.dev

6. Debugging with pdb

Add these lines to the ckan-dev service in the docker-compose.dev.yml file

stdin_open: true
tty: true

Debug with pdb (example) - Interact with docker attach $(docker container ls -qf name=ckan)

command: python -m pdb /usr/lib/ckan/venv/bin/ckan --config /srv/app/ckan.ini run --host 0.0.0.0 --passthrough-errors

7. Datastore and datapusher

The Datastore database and user is created as part of the entrypoint scripts for the db container. There is also a Datapusher container running the latest version of Datapusher.

8. NGINX

The base Docker Compose configuration uses an NGINX image as the front-end (ie: reverse proxy). It includes HTTPS running on port number 8443. A "self-signed" SSL certificate is generated as part of the ENTRYPOINT. The NGINX server_name directive and the CN field in the SSL certificate have been both set to 'localhost'. This should obviously not be used for production.

Creating the SSL cert and key files as follows: openssl req -new -newkey rsa:4096 -days 365 -nodes -x509 -subj "/C=DE/ST=Berlin/L=Berlin/O=None/CN=localhost" -keyout ckan-local.key -out ckan-local.crt The ckan-local.* files will then need to be moved into the nginx/setup/ directory

9. ckanext-envvars

The ckanext-envvars extension is used in the CKAN Docker base repo to build the base images. This extension checks for environmental variables conforming to an expected format and updates the corresponding CKAN config settings with its value.

For the extension to correctly identify which env var keys map to the format used for the config object, env var keys should be formatted in the following way:

All uppercase
Replace periods ('.') with two underscores ('__')
Keys must begin with 'CKAN' or 'CKANEXT', if they do not you can prepend them with 'CKAN___'

For example:

These parameters can be added to the .env file

For more information please see ckanext-envvars

10. CKAN_SITE_URL

For convenience the CKAN_SITE_URL parameter should be set in the .env file. For development it can be set to http://localhost:5000 and non-development set to https://localhost:8443

11. Manage new users

  1. Create a new user from the Docker host, for example to create a new user called 'admin'

    docker exec -it <container-id> ckan -c ckan.ini user add admin email=admin@localhost

    To delete the 'admin' user

    docker exec -it <container-id> ckan -c ckan.ini user remove admin

  2. Create a new user from within the ckan container. You will need to get a session on the running container

    ckan -c ckan.ini user add admin email=admin@localhost

    To delete the 'admin' user

    ckan -c ckan.ini user remove admin

12. Changing the base image

The base image used in the CKAN Dockerfile and Dockerfile.dev can be changed so a different DockerHub image is used eg: ckan/ckan-base:2.10.5 can be used instead of ckan/ckan-base:2.11.0

13. Replacing DataPusher with XLoader

Check out the wiki page for this: https://github.com/ckan/ckan-docker/wiki/Replacing-DataPusher-with-XLoader

Copying and License

This material is copyright (c) 2006-2023 Open Knowledge Foundation and contributors.

It is open and licensed under the GNU Affero General Public License (AGPL) v3.0 whose full text may be found at:

http://www.fsf.org/licensing/licenses/agpl-3.0.html