Home

Awesome

VeeR EL2 RISC-V Core

This repository contains the VeeR EL2 RISC-V Core design RTL.

License

By contributing to this project, you agree that your contribution is governed by Apache-2.0.
Files under the tools directory may be available under a different license. Please review individual files for details.

Directory Structure

├── configs                 # Configurations Dir
│   └── snapshots           # Where generated configuration files are created
├── design                  # Design root dir
│   ├── dbg                 #   Debugger
│   ├── dec                 #   Decode, Registers and Exceptions
│   ├── dmi                 #   DMI block
│   ├── exu                 #   EXU (ALU/MUL/DIV)
│   ├── ifu                 #   Fetch & Branch Prediction
│   ├── include             
│   ├── lib
│   └── lsu                 #   Load/Store
├── docs
├── tools                   # Scripts/Makefiles
└── testbench               # (Very) simple testbench
    ├── asm                 #   Example assembly files
    ├── hex                 #   Canned demo hex files
    └── tests               #   Example tests

Dependencies

Quickstart guide

  1. Clone the repository, clone submodules with git submodule update --init --recursive
  2. Setup RV_ROOT to point to the path in your local filesystem
  3. Determine your configuration (optional)
  4. Run make with tools/Makefile

Release Notes for this version

Please see release notes for changes and bug fixes in this version of VeeR.

Configurations

VeeR can be configured by running the $RV_ROOT/configs/veer.config script:

% $RV_ROOT/configs/veer.config -h for detailed help options

For example to build with a DCCM of size 64 Kb:

% $RV_ROOT/configs/veer.config -dccm_size=64

This will update the default snapshot in ./snapshots/default/ with parameters for a 64K DCCM.

Add -snapshot=dccm64, for example, if you wish to name your build snapshot dccm64 and refer to it during the build.

There are 4 predefined target configurations: default, default_ahb, typical_pd and high_perf that can be selected via the -target=name option to veer.config. Note: that the typical_pd target is what we base our published PPA numbers. It does not include an ICCM.

Building an FPGA speed optimized model: Use -fpga_optimize=1 option to veer.config to build a model that removes clock gating logic from flop model so that the FPGA builds can run at higher speeds. This is now the default option for targets other than typical_pd.

Building a Power optimized model (ASIC flows): Use -fpga_optimize=0 option to veer.config to build a model that enables clock gating logic into the flop model so that the ASIC flows get a better power footprint. This is now the default option for targettypical_pd.

This script derives the following consistent set of include files:

./snapshots/default
├── common_defines.vh                       # `defines for testbench or design
├── defines.h                               # #defines for C/assembly headers
├── el2_param.vh                            # Design parameters
├── el2_pdef.vh                             # Parameter structure
├── pd_defines.vh                           # `defines for physical design
├── perl_configs.pl                         # Perl %configs hash for scripting
├── pic_map_auto.h                          # PIC memory map based on configure size
└── whisper.json                            # JSON file for veer-iss
└── link.ld                                 # default linker control file

Building a model

While in a work directory:

  1. Set the RV_ROOT environment variable to the root of the VeeR directory structure.

    Example for bash shell: export RV_ROOT=/path/to/veer Example for csh or its derivatives: setenv RV_ROOT /path/to/veer

  2. Create your specific configuration

    (Skip if default is sufficient)
    (Name your snapshot to distinguish it from the default. Without an explicit name, it will update/override the default snapshot)

    For example if mybuild is the name for the snapshot:

    $RV_ROOT/configs/veer.config [configuration options..] -snapshot=mybuild

    Snapshots are placed in the ./snapshots directory

  3. Run a simple Hello World program (Verilator)

    make -f $RV_ROOT/tools/Makefile
    

This command will build a Verilator model of VeeR EL2 with the AXI bus, and execute a short sequence of instructions that writes out "HELLO WORLD" to the bus.

The simulation produces output on the screen like:

VerilatorTB: Start of sim

-------------------------
Hello World from VeeR EL2
-------------------------
TEST_PASSED

Finished : minstret = 437, mcycle = 922
See "exec.log" for execution trace with register updates..

The simulation generates the following files:

When debug=1 is provided, a vcd file sim.vcd is created and can be browsed by gtkwave or similar waveform viewers.

You can re-execute the simulation using:

make -f $RV_ROOT/tools/Makefile verilator

The simulation run/build command has following generic form:

make -f $RV_ROOT/tools/Makefile [<simulator>] [debug=1] [snapshot=mybuild] [target=<target>] [TEST=<test>] [TEST_DIR=<path_to_test_dir>]

where:

<simulator> -  can be 'verilator' (by default) 'irun' - Cadence xrun, 'vcs' - Synopsys VCS, 'vlog' Mentor Questa
               'riviera'- Aldec Riviera-PRO. if not provided, 'make' cleans work directory, builds verilator executable and runs a test.
debug=1     -  allows VCD generation for verilator and VCS and SHM waves for irun option.
assert=1    -  enables assertions in simulation runs (with simulators other than Verilator)
<target>    -  predefined CPU configurations 'default' ( by default), 'default_ahb', 'typical_pd', 'high_perf' 
TEST        -  allows to run a C (<test>.c) or assembly (<test>.s) test, hello_world is run by default 
TEST_DIR    -  alternative to test source directory testbench/asm or testbench/tests
<snapshot>  -  run and build executable model of custom CPU configuration, remember to provide 'snapshot' argument 
               for runs on custom configurations.
CONF_PARAMS -  allows to provide -set options to veer.conf script to alter predefined EL2 targets parameters

Example:

make -f $RV_ROOT/tools/Makefile verilator TEST=cmark

will build and simulate the testbench/asm/cmark.c program with Verilator.

If you want to compile a test only, you can run:

make -f $RV_ROOT/tools/Makefile program.hex TEST=<test> [TEST_DIR=/path/to/dir]

The Makefile uses the snapshot/<target>/link.ld file, generated by the veer.conf script by default to build the test executable. User can provide test specific linker file in form <test_name>.ld to build the test executable, in the same directory with the test source.

User also can create a test-specific Makefile in <test_name>.makefile, containing building instructions how to create the program.hex file used by simulation. The private Makefile should be in the same directory as the test source. See examples in the testbench/asm directory.

Another way to alter test building process is to use <test_name>.mki file in test source directory. It may help to select multiple sources to compile and/or alter compilation swiches. See examples in the testbench/tests/ directory

(the program.hex file is loaded to instruction and LSU bus memory slaves and optionally to DCCM/ICCM at the beginning of simulation).

User can build the program.hex file by any other means and then run simulation with the following command:

make -f $RV_ROOT/tools/Makefile <simulator>

Note: You may need to delete the program.hex file from the work directory, when running a new test.

The $RV_ROOT/testbench/asm directory contains the following tests ready to simulate:

hello_world       - default test program to run, prints Hello World message to screen and console.log
hello_world_dccm  - the same as above, but takes the string from preloaded DCCM.
hello_world_iccm  - the same as hello_world, but loads the test code to ICCM via LSU to DMA bridge and then executes
                    it from there. Runs on EL2 with AXI4 buses only. 
cmark             - coremark benchmark running with code and data in external memories
cmark_dccm        - the same as above, running data and stack from DCCM (faster)
cmark_iccm        - the same as above with preloaded code to ICCM (slower, optimized for size to fit into default ICCM). 

dhry              - Run dhrystone. (Scale by 1757 to get DMIPS/MHZ)

The $RV_ROOT/testbench/hex directory contains precompiled hex files of the tests, ready for simulation in case RISC-V SW tools are not installed.

Note: The testbench has a simple synthesizable bridge that allows you to load the ICCM via load/store instructions. This is only supported for AXI4 builds.