Awesome
usbd-midi
A simple USB MIDI device class for usb-device.
Currently this aims to be a very simple implementation, that allows the microcontroller to send or receive MIDI information to/from a host like a desktop computer.
This crate requires the use of a HAL that implements the usb-device
traits.
Example
Receive MIDI
Turn on an LED as long as note C2 is pressed. The example only shows the hardware-independent parts.
// Prerequisites, must be setup according to the used board.
let mut led = todo!(); // Must implement `embedded_hal::digital::OutputPin`.
let usb_bus = todo!(); // Must be of type `usb_device::bus::UsbBusAllocator`.
// Create a MIDI class with 1 input and 1 output jack.
let mut midi = MidiClass::new(&usb_bus, 1, 1);
let mut usb_dev = UsbDeviceBuilder::new(&usb_bus, UsbVidPid(0x16c0, 0x5e4))
.product("MIDI Test")
.device_class(0)
.device_sub_class(0)
.build();
loop {
if !usb_dev.poll(&mut [&mut midi]) {
continue;
}
let mut buffer = [0; 64];
if let Ok(size) = midi.read(&mut buffer) {
let buffer_reader = MidiPacketBufferReader::new(&buffer, size);
for packet in buffer_reader.into_iter() {
if let Ok(packet) = packet {
match packet.message {
Message::NoteOn(Channel1, Note::C2, ..) => {
led.set_low().unwrap();
},
Message::NoteOff(Channel1, Note::C2, ..) => {
led.set_high().unwrap();
},
_ => {}
}
}
}
}
}
Using more than one MIDI port
Calling MidiClass::new(&usb_bus, N, M);
with N, M >= 1
to provide more
than one input or output port requires the control-buffer-256
feature of
the usb-device
crate:
Cargo.toml:
usb-device = { version = ">=0.3.2", features = ["control-buffer-256"] }
Up to 5 in/out pairs can be used this way until we again run out of buffer
space. Note that exceeding the available buffer space will silently fail
to send the descriptors correctly, no obvious panic!
will hint the
actual problem.