Awesome
Anti-Backdoor Learning
PyTorch Code for NeurIPS 2021 paper Anti-Backdoor Learning: Training Clean Models on Poisoned Data.
The Anti-Backdoor Learning Leaderboard
We encourage submissions of anti-backdoor learning methods to our leaderboard.
Evaluation：We will run the submitted learning method on poisoned CIFAR-10 datasets by 10 backdoor attacks used in our paper, then test the Attack Sucess Rate (ASR) and Clean Accuracy (CA) of the final model.
Update: This leaderboard is created on 2021/10/21 and updated on 021/10/21.
| # | Paper | Venue | Poisoned data | Architecture | Attack | ASR (%) | CA (%) |
|---|---|---|---|---|---|---|---|
| 1 | ABL | NeurIPS 2021 | available | WRN-16-1 | BadNets | 3.04 | 86.11 |
| 2 | |||||||
| 3 | |||||||
| 4 | |||||||
| 5 | |||||||
| 6 | |||||||
| 7 | |||||||
| 8 |
Verifying the unlearning effect of ABL with 1% isolated data:
An example with a pretrained model
WRN-16-1, CIFAR-10, GridTrigger, target label 0, weights: ./weight/backdoored_model.
Run the following command to verify the unlearning effect:
$ python quick_unlearning_demo.py
The training logs are shown below. 1% isolation = 500 images from poisoned CIFAR-10. It shows the ASR (bad acc) of drops from 99.99% to 0.48% with no obviouse drop of clean acc.
Epoch,Test_clean_acc,Test_bad_acc,Test_clean_loss,Test_bad_loss
0,82.77777777777777,99.9888888888889,0.9145596397187975,0.0007119161817762587
Epoch,Test_clean_acc,Test_bad_acc,Test_clean_loss,Test_bad_loss
1,82.97777777777777,47.13333333333333,0.9546798907385932,4.189897534688313
Epoch,Test_clean_acc,Test_bad_acc,Test_clean_loss,Test_bad_loss
2,82.46666666666667,5.766666666666667,1.034722186088562,15.361101960923937
Epoch,Test_clean_acc,Test_bad_acc,Test_clean_loss,Test_bad_loss
3,82.15555555555555,1.5222222222222221,1.0855470676422119,22.175255742390952
Epoch,Test_clean_acc,Test_bad_acc,Test_clean_loss,Test_bad_loss
4,82.0111111111111,0.7111111111111111,1.1183592330084906,26.754894670274524
Epoch,Test_clean_acc,Test_bad_acc,Test_clean_loss,Test_bad_loss
5,81.86666666666666,0.4777777777777778,1.1441074348025853,30.429284422132703
The unlearned model will be saved to 'weight/ABL_results/<model_name>.tar'
Please read quick_unlearning_demo.py to adjust the default parameters for your experiment.
More defense results on BadNets model trained with Data Augmentation
[Logs for our ABL against Badnet Attacks]
----------- Model Fine-tuning --------------
epoch: 40 lr: 0.0100
Epoch[41]:[200/774] loss:0.1456(0.1240) prec@1:98.44(95.84) prec@5:98.44(99.96)
Epoch[41]:[400/774] loss:0.0553(0.1080) prec@1:98.44(96.38) prec@5:100.00(99.97)
Epoch[41]:[600/774] loss:0.0693(0.1015) prec@1:96.88(96.63) prec@5:100.00(99.97)
[Clean] Prec@1: 92.23, Loss: 0.2408
[Bad] Prec@1: 100.00, Loss: 0.0001
epoch: 41 lr: 0.0100
Epoch[42]:[200/774] loss:0.0532(0.0653) prec@1:98.44(97.89) prec@5:100.00(100.00)
Epoch[42]:[400/774] loss:0.0534(0.0659) prec@1:98.44(97.76) prec@5:100.00(100.00)
Epoch[42]:[600/774] loss:0.0514(0.0659) prec@1:96.88(97.76) prec@5:100.00(99.99)
[Clean] Prec@1: 92.60, Loss: 0.2390
[Bad] Prec@1: 100.00, Loss: 0.0000
epoch: 42 lr: 0.0100
Epoch[43]:[200/774] loss:0.0054(0.0499) prec@1:100.00(98.33) prec@5:100.00(99.99)
Epoch[43]:[400/774] loss:0.0429(0.0525) prec@1:98.44(98.21) prec@5:100.00(99.99)
Epoch[43]:[600/774] loss:0.0448(0.0537) prec@1:98.44(98.19) prec@5:100.00(99.99)
[Clean] Prec@1: 92.52, Loss: 0.2409
[Bad] Prec@1: 100.00, Loss: 0.0001
epoch: 43 lr: 0.0100
Epoch[44]:[200/774] loss:0.0253(0.0472) prec@1:98.44(98.41) prec@5:100.00(99.99)
Epoch[44]:[400/774] loss:0.0104(0.0463) prec@1:100.00(98.43) prec@5:100.00(99.99)
Epoch[44]:[600/774] loss:0.0200(0.0452) prec@1:100.00(98.46) prec@5:100.00(99.99)
[Clean] Prec@1: 92.60, Loss: 0.2459
[Bad] Prec@1: 100.00, Loss: 0.0000
epoch: 44 lr: 0.0100
Epoch[45]:[200/774] loss:0.0510(0.0385) prec@1:98.44(98.79) prec@5:100.00(99.99)
Epoch[45]:[400/774] loss:0.0244(0.0381) prec@1:98.44(98.82) prec@5:100.00(100.00)
Epoch[45]:[600/774] loss:0.0203(0.0391) prec@1:100.00(98.83) prec@5:100.00(99.99)
[Clean] Prec@1: 92.81, Loss: 0.2484
[Bad] Prec@1: 100.00, Loss: 0.0000
epoch: 45 lr: 0.0100
Epoch[46]:[200/774] loss:0.0110(0.0374) prec@1:100.00(98.75) prec@5:100.00(99.99)
Epoch[46]:[400/774] loss:0.0204(0.0371) prec@1:98.44(98.79) prec@5:100.00(99.99)
Epoch[46]:[600/774] loss:0.0183(0.0369) prec@1:100.00(98.76) prec@5:100.00(99.99)
[Clean] Prec@1: 92.99, Loss: 0.2495
[Bad] Prec@1: 100.00, Loss: 0.0000
epoch: 46 lr: 0.0100
Epoch[47]:[200/774] loss:0.0452(0.0315) prec@1:98.44(98.97) prec@5:100.00(100.00)
Epoch[47]:[400/774] loss:0.0315(0.0310) prec@1:98.44(98.98) prec@5:100.00(100.00)
Epoch[47]:[600/774] loss:0.0298(0.0303) prec@1:100.00(99.01) prec@5:100.00(100.00)
[Clean] Prec@1: 92.82, Loss: 0.2563
[Bad] Prec@1: 100.00, Loss: 0.0000
epoch: 47 lr: 0.0100
Epoch[48]:[200/774] loss:0.0397(0.0269) prec@1:98.44(99.12) prec@5:100.00(100.00)
Epoch[48]:[400/774] loss:0.0617(0.0262) prec@1:98.44(99.16) prec@5:100.00(100.00)
Epoch[48]:[600/774] loss:0.0630(0.0270) prec@1:98.44(99.16) prec@5:100.00(100.00)
[Clean] Prec@1: 92.81, Loss: 0.2678
[Bad] Prec@1: 100.00, Loss: 0.0000
epoch: 48 lr: 0.0100
Epoch[49]:[200/774] loss:0.0251(0.0267) prec@1:100.00(99.15) prec@5:100.00(100.00)
Epoch[49]:[400/774] loss:0.0298(0.0262) prec@1:98.44(99.14) prec@5:100.00(100.00)
Epoch[49]:[600/774] loss:0.0384(0.0258) prec@1:98.44(99.15) prec@5:100.00(100.00)
[Clean] Prec@1: 93.09, Loss: 0.2586
[Bad] Prec@1: 100.00, Loss: 0.0002
epoch: 49 lr: 0.0100
Epoch[50]:[200/774] loss:0.0359(0.0203) prec@1:98.44(99.30) prec@5:100.00(100.00)
Epoch[50]:[400/774] loss:0.0062(0.0214) prec@1:100.00(99.27) prec@5:100.00(100.00)
Epoch[50]:[600/774] loss:0.0418(0.0222) prec@1:98.44(99.25) prec@5:100.00(100.00)
[Clean] Prec@1: 93.03, Loss: 0.2626
[Bad] Prec@1: 100.00, Loss: 0.0001
epoch: 50 lr: 0.0100
Epoch[51]:[200/774] loss:0.0040(0.0222) prec@1:100.00(99.27) prec@5:100.00(100.00)
Epoch[51]:[400/774] loss:0.0269(0.0236) prec@1:98.44(99.21) prec@5:100.00(100.00)
Epoch[51]:[600/774] loss:0.0219(0.0234) prec@1:100.00(99.23) prec@5:100.00(100.00)
[Clean] Prec@1: 93.19, Loss: 0.2604
[Bad] Prec@1: 100.00, Loss: 0.0000
epoch: 51 lr: 0.0100
Epoch[52]:[200/774] loss:0.0154(0.0201) prec@1:98.44(99.34) prec@5:100.00(100.00)
Epoch[52]:[400/774] loss:0.0328(0.0200) prec@1:98.44(99.38) prec@5:100.00(100.00)
Epoch[52]:[600/774] loss:0.0220(0.0204) prec@1:98.44(99.36) prec@5:100.00(100.00)
[Clean] Prec@1: 93.27, Loss: 0.2652
[Bad] Prec@1: 100.00, Loss: 0.0000
epoch: 52 lr: 0.0100
Epoch[53]:[200/774] loss:0.0090(0.0194) prec@1:100.00(99.39) prec@5:100.00(100.00)
Epoch[53]:[400/774] loss:0.0019(0.0195) prec@1:100.00(99.41) prec@5:100.00(100.00)
Epoch[53]:[600/774] loss:0.0402(0.0190) prec@1:98.44(99.45) prec@5:100.00(100.00)
[Clean] Prec@1: 93.04, Loss: 0.2735
[Bad] Prec@1: 100.00, Loss: 0.0000
epoch: 53 lr: 0.0100
Epoch[54]:[200/774] loss:0.0154(0.0186) prec@1:100.00(99.38) prec@5:100.00(100.00)
Epoch[54]:[400/774] loss:0.0124(0.0182) prec@1:100.00(99.40) prec@5:100.00(100.00)
Epoch[54]:[600/774] loss:0.0144(0.0181) prec@1:100.00(99.45) prec@5:100.00(100.00)
[Clean] Prec@1: 93.17, Loss: 0.2693
[Bad] Prec@1: 100.00, Loss: 0.0000
epoch: 54 lr: 0.0100
Epoch[55]:[200/774] loss:0.0119(0.0168) prec@1:100.00(99.43) prec@5:100.00(100.00)
Epoch[55]:[400/774] loss:0.0228(0.0170) prec@1:98.44(99.42) prec@5:100.00(100.00)
Epoch[55]:[600/774] loss:0.0096(0.0164) prec@1:100.00(99.47) prec@5:100.00(100.00)
[Clean] Prec@1: 92.84, Loss: 0.2786
[Bad] Prec@1: 100.00, Loss: 0.0001
epoch: 55 lr: 0.0100
Epoch[56]:[200/774] loss:0.0307(0.0146) prec@1:98.44(99.51) prec@5:100.00(100.00)
Epoch[56]:[400/774] loss:0.0065(0.0149) prec@1:100.00(99.52) prec@5:100.00(100.00)
Epoch[56]:[600/774] loss:0.0348(0.0155) prec@1:98.44(99.50) prec@5:100.00(100.00)
[Clean] Prec@1: 93.12, Loss: 0.2794
[Bad] Prec@1: 100.00, Loss: 0.0000
epoch: 56 lr: 0.0100
Epoch[57]:[200/774] loss:0.0014(0.0134) prec@1:100.00(99.59) prec@5:100.00(100.00)
Epoch[57]:[400/774] loss:0.0060(0.0133) prec@1:100.00(99.59) prec@5:100.00(100.00)
Epoch[57]:[600/774] loss:0.0400(0.0133) prec@1:95.31(99.61) prec@5:100.00(100.00)
[Clean] Prec@1: 93.13, Loss: 0.2819
[Bad] Prec@1: 100.00, Loss: 0.0000
epoch: 57 lr: 0.0100
Epoch[58]:[200/774] loss:0.0062(0.0122) prec@1:100.00(99.60) prec@5:100.00(100.00)
Epoch[58]:[400/774] loss:0.0065(0.0134) prec@1:100.00(99.56) prec@5:100.00(100.00)
Epoch[58]:[600/774] loss:0.0198(0.0134) prec@1:100.00(99.59) prec@5:100.00(100.00)
[Clean] Prec@1: 93.11, Loss: 0.2795
[Bad] Prec@1: 100.00, Loss: 0.0000
epoch: 58 lr: 0.0100
Epoch[59]:[200/774] loss:0.0053(0.0094) prec@1:100.00(99.73) prec@5:100.00(100.00)
Epoch[59]:[400/774] loss:0.0064(0.0105) prec@1:100.00(99.70) prec@5:100.00(100.00)
Epoch[59]:[600/774] loss:0.0068(0.0112) prec@1:100.00(99.67) prec@5:100.00(100.00)
[Clean] Prec@1: 93.04, Loss: 0.2900
[Bad] Prec@1: 100.00, Loss: 0.0000
epoch: 59 lr: 0.0100
Epoch[60]:[200/774] loss:0.0039(0.0147) prec@1:100.00(99.55) prec@5:100.00(99.99)
Epoch[60]:[400/774] loss:0.0399(0.0142) prec@1:96.88(99.58) prec@5:100.00(100.00)
Epoch[60]:[600/774] loss:0.0030(0.0134) prec@1:100.00(99.59) prec@5:100.00(100.00)
[Clean] Prec@1: 93.24, Loss: 0.2905
[Bad] Prec@1: 100.00, Loss: 0.0000
----------- Model unlearning --------------
epoch: 0 lr: 0.0005
[Clean] Prec@1: 93.24, Loss: 0.2905
[Bad] Prec@1: 100.00, Loss: 0.0000
testing the ascended model......
[Clean] Prec@1: 93.24, Loss: 0.2905
[Bad] Prec@1: 100.00, Loss: 0.0000
epoch: 1 lr: 0.0005
testing the ascended model......
[Clean] Prec@1: 92.59, Loss: 0.3283
[Bad] Prec@1: 15.84, Loss: 4.3276
epoch: 2 lr: 0.0005
testing the ascended model......
[Clean] Prec@1: 91.88, Loss: 0.3632
[Bad] Prec@1: 0.30, Loss: 13.5180
epoch: 3 lr: 0.0005
testing the ascended model......
[Clean] Prec@1: 91.71, Loss: 0.3730
[Bad] Prec@1: 0.17, Loss: 17.6328
epoch: 4 lr: 0.0005
testing the ascended model......
[Clean] Prec@1: 91.80, Loss: 0.3656
[Bad] Prec@1: 0.16, Loss: 19.2982
How to Prepare Poisoned Data?
The DatasetBD Class in data_loader.py can be used to generate poisoned training set by different attacks.
The following is an example:
from data_loader import *
if opt.load_fixed_data:
# load the fixed poisoned data of numpy format, e.g. Dynamic, FC, DFST attacks etc.
# Note that the load data type is a pytorch tensor
poisoned_data = np.load(opt.poisoned_data_path, allow_pickle=True)
poisoned_data_loader = DataLoader(dataset=poisoned_data,
batch_size=opt.batch_size,
shuffle=True,
)
else:
poisoned_data, poisoned_data_loader = get_backdoor_loader(opt)
test_clean_loader, test_bad_loader = get_test_loader(opt)
Note that, for attacks Dynamic, DFTS, FC, etc, it is hard to include them in the get_backdoor_loader(). So, better to create pre-poisoned datasets for these attacks using create_poisoned_data.py, then load the poisoned dataset by setting opt.loader_fixed_data == True.
An example of how to create a poisoned dataset by the Dynamic attack is given in the create_backdoor_data dictionary.
Please feel free to read create_poisoned_data.py and get_backdoor_loader and adjust the parameters for your experiment.
ABL - Stage One: Backdoor Isolation
To isolate 1% potentially backdoored examples and an isolation model, you can run the following command:
$ python backdoor_isolation.py
After that, you will get an isolation model and use it to isolate 1% poisoned data of the lowest training loss. The isolated data and isolation model will be saved to 'isolation_data' and 'weight/isolation_model', respectively.
Please check more details of the experimental settings in Section 4 and Appendix A of our paper, and adjust the parameters in config.py for your experiment.
ABL - Stage Two: Backdoor Unlearning
With the 1% isolated data and the isolation model, we can then continue with the later training of unlearning using the following code:
$ python backdoor_unlearning.py
At this stage, the backdoor has already been learned into the isolation model. In order to improve the clean acc of the isolation model, we finetune the model for several epochs before unlearning. If you want to go directly to see the unlearning result, you can skip the finetuning step by setting opt.finetuning_ascent_model== False .
The final result of unlearning will be saved to ABL_results and logs. Please read backdoor_unlearning.py and config.py and adjust the parameters for your experiment.
Links to External Repos
Attacks
CL: Clean-label backdoor attacks
SIG: A New Backdoor Attack in CNNS by Training Set Corruption Without Label Poisoning
## reference code
def plant_sin_trigger(img, delta=20, f=6, debug=False):
"""
Implement paper:
> Barni, M., Kallas, K., & Tondi, B. (2019).
> A new Backdoor Attack in CNNs by training set corruption without label poisoning.
> arXiv preprint arXiv:1902.11237
superimposed sinusoidal backdoor signal with default parameters
"""
alpha = 0.2
img = np.float32(img)
pattern = np.zeros_like(img)
m = pattern.shape[1]
for i in range(img.shape[0]):
for j in range(img.shape[1]):
for k in range(img.shape[2]):
pattern[i, j] = delta * np.sin(2 * np.pi * j * f / m)
img = alpha * np.uint32(img) + (1 - alpha) * pattern
img = np.uint8(np.clip(img, 0, 255))
# if debug:
# cv2.imshow('planted image', img)
# cv2.waitKey()
return img
Dynamic: Input-aware Dynamic Backdoor Attack
FC: Poison Frogs! Targeted Clean-Label Poisoning Attacks on Neural Networks
DFST: Deep Feature Space Trojan Attack of Neural Networks by Controlled Detoxification
LBA: Latent Backdoor Attacks on Deep Neural Networks
CBA: Composite Backdoor Attack for Deep Neural Network by Mixing Existing Benign Features
Feature space attack benchmark
Note: This repository is the official implementation of Just How Toxic is Data Poisoning? A Unified Benchmark for Backdoor and Data Poisoning Attacks.
Library
Note: TrojanZoo provides a universal pytorch platform to conduct security researches (especially backdoor attacks/defenses) of image classification in deep learning.
Backdoors 101 — is a PyTorch framework for state-of-the-art backdoor defenses and attacks on deep learning models.
Citation
If you find the code is useful for your research, please cite our work:
@inproceedings{li2021anti,
title={Anti-Backdoor Learning: Training Clean Models on Poisoned Data},
author={Li, Yige and Lyu, Xixiang and Koren, Nodens and Lyu, Lingjuan and Li, Bo and Ma, Xingjun},
booktitle={NeurIPS},
year={2021}
}
Contacts
Please feel free to drop a message here if you have any questions.