Awesome
Configure AWS Credentials for GitHub Actions
Configure your AWS credentials and region environment variables for use in other GitHub Actions.
This action implements the AWS JavaScript SDK credential resolution chain and exports session environment variables for your other Actions to use. Environment variable exports are detected by both the AWS SDKs and the AWS CLI for AWS API calls.
Overview
API calls to AWS need to be signed with credential information, so when you use one of the AWS SDKs or an AWS tool, you must provide it with AWS credentials and and AWS region. One way to do that in GitHub Actions is to use a repository secret with IAM credentials, but this doesn't follow AWS security guidelines on using long term credentials. Instead, we recommend that you use a long term credential or JWT to fetch a temporary credential, and use that with your tools instead. This GitHub Action facilitates just that.
AWS SDKs and Tools look for your credentials in standardized environment variables. In essence, this Action runs through the standard credential resolution flow, and at the end, exports environment variables for you to use later.
We support five methods for fetching credentials from AWS, but we recommend that you use GitHub's OIDC provider in conjunction with a configured AWS IAM Identity Provider endpoint.
For more information on how to do that, read on.
Note about GHES
Some of this documentation may be inaccurate if you are using GHES (GitHub Enterprise Server), please take note to review the GitHub documentation when relevant.
For example, the URL that the OIDC JWT is issued from is different than the
usual token.actions.githubusercontent.com
, and will be unique to your
enterprise server. As a result, you will need to configure this differently when
you create the Identity Provider.
We do not presently have a GHES testing environment to validate this action. If you are running in GHES and encounter problems, please let us know.
Security recommendations
We recommend following Amazon IAM best practices for the AWS credentials used in GitHub Actions workflows, including:
- Do not store credentials in your repository's code.
- Grant least privilege to the credentials used in GitHub Actions workflows. Grant only the permissions required to perform the actions in your GitHub Actions workflows. Do not assume overly permissive roles, even for testing.
- Monitor the activity of the credentials used in GitHub Actions workflows.
- Use temporary credentials when possible.
- Periodically rotate any long-term credentials you use.
Using this action
There are five different supported ways to retrieve credentials:
- Using GitHub's OIDC provider (
AssumeRoleWithWebIdentity
) - Proceeding as an IAM user (No STS call is made)
- Using access keys as action input (
AssumeRole
) - Using a WebIdentity Token File (
AssumeRoleWithWebIdentity
) - Using existing credentials in your runner (
AssumeRole
)
Because we use the AWS JavaScript SDK, we always will use the credential resolution flow for Node.js. Depending on your inputs, the action might override parts of this flow.
We recommend using the first option above: GitHub's OIDC provider. This method uses OIDC to get short-lived credentials needed for your actions. See OIDC for more information on how to setup your AWS account to assume a role with OIDC.
The following table describes which method we'll use to get your credentials based on which values are supplied to the Action:
Identity Used | aws-access-key-id | role-to-assume | web-identity-token-file | role-chaining | id-token permission |
---|---|---|---|---|---|
[✅ Recommended] Assume Role directly using GitHub OIDC provider | ✔ | ✔ | |||
IAM User | ✔ | ||||
Assume Role using IAM User credentials | ✔ | ✔ | |||
Assume Role using WebIdentity Token File credentials | ✔ | ✔ | |||
Assume Role using existing credentials | ✔ | ✔ |
Note: role-chaining
is not always necessary to use existing credentials.
If you're getting a "Credentials loaded by the SDK do not match" error,
try enabling this option.
Options
See action.yml for more detail.
Option | Description | Required |
---|---|---|
aws-region | Which AWS region to use | Yes |
role-to-assume | Role for which to fetch credentials. Only required for some authentication types. | No |
aws-access-key-id | AWS access key to use. Only required for some authentication types. | No |
aws-secret-access-key | AWS secret key to use. Only required for some authentication types. | No |
aws-session-token | AWS session token to use. Used in uncommon authentication scenarios. | No |
role-chaining | Use existing credentials from the environment to assume a new role. | No |
audience | The JWT audience when using OIDC. Used in non-default AWS partitions, like China regions. | No |
http-proxy | An HTTP proxy to use for API calls. | No |
mask-aws-account-id | AWS account IDs are not considered secret. Setting this will hide account IDs from output anyway. | No |
role-duration-seconds | The assumed role duration in seconds, if assuming a role. Defaults to 1 hour. | No |
role-external-id | The external ID of the role to assume. Only needed if your role requires it. | No |
role-session-name | Defaults to "GitHubActions", but may be changed if required. | No |
role-skip-session-tagging | Skips session tagging if set. | No |
inline-session-policy | You may further restrict the assumed role policy by defining an inline policy here. | No |
managed-session-policies | You may further restrict the assumed role policy by specifying a managed policy here. | No |
output-credentials | When set, outputs fetched credentials as action step output. Defaults to false. | No |
unset-current-credentials | When set, attempts to unset any existing credentials in your action runner. | No |
disable-retry | Disabled retry/backoff logic for assume role calls. By default, retries are enabled. | No |
retry-max-attempts | Limits the number of retry attempts before giving up. Defaults to 12. | No |
special-characters-workaround | Uncommonly, some environments cannot tolerate special characters in a secret key. This option will retry fetching credentials until the secret access key does not contain special characters. This option overrides disable-retry and retry-max-attempts. | No |
Credential Lifetime
The default session duration is 1 hour.
If you would like to adjust this you can pass a duration to
role-duration-seconds
, but the duration cannot exceed the maximum that was
defined when the IAM Role was created.
External ID
If your role requires an external ID to assume, you can provide the external ID
with the role-external-id
input
Session tagging and name
The default session name is "GitHubActions", and you can modify it by specifying
the desired name in role-session-name
. The session will be tagged with the
following tags: (Refer to GitHub's documentation for GITHUB_
environment
variable definitions)
Key | Value |
---|---|
GitHub | "Actions" |
Repository | GITHUB_REPOSITORY |
Workflow | GITHUB_WORKFLOW |
Action | GITHUB_ACTION |
Actor | GITHUB_ACTOR |
Branch | GITHUB_REF |
Commit | GITHUB_SHA |
Note: all tag values must conform to
the tag requirements.
Particularly, GITHUB_WORKFLOW
will be truncated if it's too long. If
GITHUB_ACTOR
or GITHUB_WORKFLOW
contain invalid characters, the characters
will be replaced with an '*'.
The action will use session tagging by default during role assumption, unless you follow our recommendation and are assuming a role with a WebIdentity. For WebIdentity role assumption, the session tags have to be included in the encoded WebIdentity token. This means that tags can only be supplied by the OIDC provider, and they cannot set during the AssumeRoleWithWebIdentity API call within the Action. See #419 for more information.
You can skip this session tagging by providing
role-skip-session-tagging
as true in the action's inputs:
uses: aws-actions/configure-aws-credentials@v4
with:
role-skip-session-tagging: true
Session policies
Session policies are not required, but they allow you to limit the scope of the fetched credentials without making changes to IAM roles. You can specify inline session policies right in your workflow file, or refer to an existing managed session policy by its ARN.
Inline session policies
An IAM policy in stringified JSON format that you want to use as an inline session policy. Depending on preferences, the JSON could be written on a single line like this:
uses: aws-actions/configure-aws-credentials@v4
with:
inline-session-policy: '{"Version":"2012-10-17","Statement":[{"Sid":"Stmt1","Effect":"Allow","Action":"s3:List*","Resource":"*"}]}'
Or we can have a nicely formatted JSON as well:
uses: aws-actions/configure-aws-credentials@v4
with:
inline-session-policy: >-
{
"Version": "2012-10-17",
"Statement": [
{
"Sid":"Stmt1",
"Effect":"Allow",
"Action":"s3:List*",
"Resource":"*"
}
]
}
Managed session policies
The Amazon Resource Names (ARNs) of the IAM managed policies that you want to use as managed session policies. The policies must exist in the same account as the role. You can pass a single managed policy like this:
uses: aws-actions/configure-aws-credentials@v4
with:
managed-session-policies: arn:aws:iam::aws:policy/AmazonS3ReadOnlyAccess
And we can pass multiple managed policies likes this:
uses: aws-actions/configure-aws-credentials@v4
with:
managed-session-policies: |
arn:aws:iam::aws:policy/AmazonS3ReadOnlyAccess
arn:aws:iam::aws:policy/AmazonS3OutpostsReadOnlyAccess
Misc
Adjust the retry mechanism
You can now configure retry settings for when the STS call fails. By default, we
retry with exponential backoff 12
times. You can disable this behavior
altogether by setting the disable-retry
input to true
, or you can configure
the number of times it retries with the retry-max-attempts
input.
Mask account ID
Your account ID is not masked by default in workflow logs since it's not
considered sensitive information. However, you can set the mask-aws-account-id
input to true
to mask your account ID in workflow logs if desired.
Unset current credentials
Sometimes, existing credentials in your runner can get in the way of the
intended outcome. You can set the unset-current-credentials
input to true
to
work around this issue.
Special characters in AWS_SECRET_ACCESS_KEY
Some edge cases are unable to properly parse an AWS_SECRET_ACCESS_KEY
if it
contains special characters. For more information, please see the
AWS CLI documentation.
If you set the special-characters-workaround
option, this action will
continually retry fetching credentials until we get one that does not have
special characters. This option overrides the disable-retry
and
retry-max-attempts
options. We recommend that you do not enable this option
unless required, because retrying APIs infinitely until they succeed is not best
practice.
OIDC
We recommend using GitHub's OIDC provider to get short-lived AWS credentials needed for your actions. When using OIDC, you configure IAM to accept JWTs from GitHub's OIDC endpoint. This action will then create a JWT unique to the workflow run using the OIDC endpoint, and it will use the JWT to assume the specified role with short-term credentials.
To get this to work
-
Configure your workflow to use the
id-token: write
permission. -
Configure your audience, if required.
-
In your AWS account, configure IAM to trust GitHub's OIDC identity provider.
-
Configure an IAM role with appropriate claim limits and permission scope.
Note: Naming your role "GitHubActions" has been reported to not work. See #953.
-
Specify that role's ARN when setting up this action.
First, in order for this action to create the JWT, your workflow file must have
the id-token: write
permission:
permissions:
id-token: write
contents: read
OIDC Audience
When the JWT is created, an audience needs to be specified. Normally, you would
use sts.amazonaws.com
, and this action uses this by default if you don't
specify one. This will work for most cases. Changing the default audience may
be necessary when using non-default AWS partitions, such as China regions.
You can specify the audience through the audience
input:
- name: Configure AWS Credentials for China region audience
uses: aws-actions/configure-aws-credentials@v4
with:
audience: sts.amazonaws.com.cn
aws-region: us-east-3
role-to-assume: arn:aws-cn:iam::123456789100:role/my-github-actions-role
Configuring IAM to trust GitHub
To use GitHub's OIDC provider, you must first set up federation with the provider as an IAM IdP. The GitHub OIDC provider only needs to be created once per account (i.e. multiple IAM Roles that can be assumed by the GitHub's OIDC can share a single OIDC Provider). Here is a sample CloudFormation template that will configure this trust for you.
Note that the thumbprint below has been set to all F's because the thumbprint is
not used when authenticating token.actions.githubusercontent.com
. This is a
special case used only when GitHub's OIDC is authenticating to IAM. IAM uses
its library of trusted CAs to authenticate. The value is still the API, so it
must be specified.
You can copy the template below, or load it from here: https://d38mtn6aq9zhn6.cloudfront.net/configure-aws-credentials-latest.yml
Parameters:
GitHubOrg:
Description: Name of GitHub organization/user (case sensitive)
Type: String
RepositoryName:
Description: Name of GitHub repository (case sensitive)
Type: String
OIDCProviderArn:
Description: Arn for the GitHub OIDC Provider.
Default: ""
Type: String
OIDCAudience:
Description: Audience supplied to configure-aws-credentials.
Default: "sts.amazonaws.com"
Type: String
Conditions:
CreateOIDCProvider: !Equals
- !Ref OIDCProviderArn
- ""
Resources:
Role:
Type: AWS::IAM::Role
Properties:
AssumeRolePolicyDocument:
Statement:
- Effect: Allow
Action: sts:AssumeRoleWithWebIdentity
Principal:
Federated: !If
- CreateOIDCProvider
- !Ref GithubOidc
- !Ref OIDCProviderArn
Condition:
StringEquals:
token.actions.githubusercontent.com:aud: !Ref OIDCAudience
StringLike:
token.actions.githubusercontent.com:sub: !Sub repo:${GitHubOrg}/${RepositoryName}:*
GithubOidc:
Type: AWS::IAM::OIDCProvider
Condition: CreateOIDCProvider
Properties:
Url: https://token.actions.githubusercontent.com
ClientIdList:
- sts.amazonaws.com
ThumbprintList:
- ffffffffffffffffffffffffffffffffffffffff
Outputs:
Role:
Value: !GetAtt Role.Arn
Claims and scoping permissions
To align with the Amazon IAM best practice of granting least
privilege,
the assume role policy document should contain a
Condition
that specifies a subject (sub
) allowed to assume the role. GitHub also
recommends
filtering for the correct audience (aud
). See AWS IAM
documentation
on which claims you can filter for in your trust policies.
Without a subject (sub
) condition, any GitHub user or repository could
potentially assume the role. The subject can be scoped to a GitHub organization
and repository as shown in the CloudFormation template. However, scoping it down
to your org and repo may cause the role assumption to fail in some cases. See
Example subject claims
for specific details on what the subject value will be depending on your
workflow. You can also customize your subject claim
if you want full control over the information you can filter for in your trust
policy. If you aren't sure what your subject (sub
) key is, you can add the
actions-oidc-debugger
action to your workflow to see the value of the subject (sub
) key, as well as
other claims.
Additional claim conditions can be added for higher specificity as explained in the GitHub documentation. Due to implementation details, not every OIDC claim is presently supported by IAM.
Further information about OIDC
For further information on OIDC and GitHub Actions, please see:
- AWS docs: Creating OpenID Connect (OIDC) identity providers
- AWS docs: IAM JSON policy elements: Condition
- GitHub docs: About security hardening with OpenID Connect
- GitHub docs: Configuring OpenID Connect in Amazon Web Services
- GitHub changelog: GitHub Actions: Secure cloud deployments with OpenID Connect
Self-Hosted Runners
If you run your GitHub Actions in a self-hosted runner that already has access to AWS credentials, such as an EC2 instance, then you do not need to provide IAM user access key credentials to this action. We will use the standard AWS JavaScript SDK credential resolution methods to find your credentials, so if the AWS JS SDK can authenticate on your runner, this Action will as well.
If no access key credentials are given in the action inputs, this action will use credentials from the runner environment using the default methods for the AWS SDK for Javascript.
You can use this action to simply configure the region and account ID in the environment, and then use the runner's credentials for all AWS API calls made by your Actions workflow:
uses: aws-actions/configure-aws-credentials@v4
with:
aws-region: us-east-2
In this case, your runner's credentials must have permissions to call any AWS APIs called by your Actions workflow.
Or, you can use this action to assume a role, and then use the role credentials for all AWS API calls made by your Actions workflow:
uses: aws-actions/configure-aws-credentials@v4
with:
aws-region: us-east-2
role-to-assume: my-github-actions-role
In this case, your runner's credentials must have permissions to assume the role.
You can also assume a role using a web identity token file, such as if using Amazon EKS IRSA. Pods running in EKS worker nodes that do not run as root can use this file to assume a role with a web identity.
Proxy Configuration
If need use a HTTP proxy you can set it in the action manually.
Additionally this action will always consider the HTTP_PROXY
environment
variable.
Manually configured proxy:
uses: aws-actions/configure-aws-credentials@v4
with:
aws-region: us-east-2
role-to-assume: my-github-actions-role
http-proxy: "http://companydomain.com:3128"
Proxy configured in the environment variable:
# Your environment configuration
HTTP_PROXY="http://companydomain.com:3128"
Use with the AWS CLI
This workflow does not install the AWS CLI
into your environment. Self-hosted runners that intend to run this action prior
to executing aws
commands need to have the AWS CLI
installed
if it's not already present.
Most GitHub hosted runner environments
should include the AWS CLI by default.
Examples
AssumeRoleWithWebIdentity (recommended)
- name: Configure AWS Credentials
uses: aws-actions/configure-aws-credentials@v4
with:
aws-region: us-east-2
role-to-assume: arn:aws:iam::123456789100:role/my-github-actions-role
role-session-name: MySessionName
In this example, the Action will load the OIDC token from the GitHub-provided
environment variable and use it to assume the role
arn:aws:iam::123456789100:role/my-github-actions-role
with the session name
MySessionName
.
AssumeRole with role previously assumed by action in same workflow
- name: Configure AWS Credentials
uses: aws-actions/configure-aws-credentials@v4
with:
aws-region: us-east-2
role-to-assume: arn:aws:iam::123456789100:role/my-github-actions-role
role-session-name: MySessionName
- name: Configure other AWS Credentials
uses: aws-actions/configure-aws-credentials@v4
with:
aws-region: us-east-2
role-to-assume: arn:aws:iam::987654321000:role/my-second-role
role-session-name: MySessionName
role-chaining: true
In this two-step example, the first step will use OIDC to assume the role
arn:aws:iam::123456789100:role/my-github-actions-role
just as in the prior
example. Following that, a second step will use this role to assume a different
role, arn:aws:iam::987654321000:role/my-second-role
.
AssumeRole with static IAM credentials in repository secrets
- name: Configure AWS Credentials
uses: aws-actions/configure-aws-credentials@v4
with:
aws-access-key-id: ${{ secrets.AWS_ACCESS_KEY_ID }}
aws-secret-access-key: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
aws-region: us-east-2
role-to-assume: ${{ secrets.AWS_ROLE_TO_ASSUME }}
role-external-id: ${{ secrets.AWS_ROLE_EXTERNAL_ID }}
role-duration-seconds: 1200
role-session-name: MySessionName
In this example, the secret AWS_ROLE_TO_ASSUME
contains a string like
arn:aws:iam::123456789100:role/my-github-actions-role
. To assume a role in
the same account as the static credentials, you can simply specify the role
name, like role-to-assume: my-github-actions-role
.
Retrieving credentials from step output, AssumeRole with temporary credentials
- name: Configure AWS Credentials 1
id: creds
uses: aws-actions/configure-aws-credentials@v4
with:
aws-region: us-east-2
role-to-assume: arn:aws:iam::123456789100:role/my-github-actions-role
output-credentials: true
- name: get caller identity 1
run: |
aws sts get-caller-identity
- name: Configure AWS Credentials 2
uses: aws-actions/configure-aws-credentials@v4
with:
aws-region: us-east-2
aws-access-key-id: ${{ steps.creds.outputs.aws-access-key-id }}
aws-secret-access-key: ${{ steps.creds.outputs.aws-secret-access-key }}
aws-session-token: ${{ steps.creds.outputs.aws-session-token }}
role-to-assume: arn:aws:iam::123456789100:role/my-other-github-actions-role
- name: get caller identity2
run: |
aws sts get-caller-identity
This example shows that you can reference the fetched credentials as outputs if
output-credentials
is set to true. This example also shows that you can use
the aws-session-token
input in a situation where session tokens are fetched
and passed to this action.
License Summary
This code is made available under the MIT license.
Security Disclosures
If you would like to report a potential security issue in this project, please do not create a GitHub issue. Instead, please follow the instructions here or email AWS security directly.