Home

Awesome

Dump1090 README

Dump 1090 is a Mode S decoder specifically designed for RTLSDR devices.

The main features are:

While from time to time I still add / fix stuff in my fork, I target minimalism of the implementation. However there is a much more feature complete fork available, developed by MalcolmRobb.

Installation

Type "make".

Normal usage

To capture traffic directly from your RTL device and show the captured traffic on standard output, just run the program without options at all:

./dump1090

To just output hexadecimal messages:

./dump1090 --raw

To run the program in interactive mode:

./dump1090 --interactive

To run the program in interactive mode, with networking support, and connect with your browser to http://localhost:8080 to see live traffic:

./dump1090 --interactive --net

In interactive mode it is possible to have a less information dense but more "arcade style" output, where the screen is refreshed every second displaying all the recently seen aircrafts with some additional information such as altitude and flight number, extracted from the received Mode S packets.

Using files as source of data

To decode data from file, use:

./dump1090 --ifile /path/to/binfile

The binary file should be created using rtl_sdr like this (or with any other program that is able to output 8-bit unsigned IQ samples at 2Mhz sample rate).

rtl_sdr -f 1090000000 -s 2000000 -g 50 output.bin

In the example rtl_sdr a gain of 50 is used, simply you should use the highest gain availabe for your tuner. This is not needed when calling Dump1090 itself as it is able to select the highest gain supported automatically.

It is possible to feed the program with data via standard input using the --ifile option with "-" as argument.

Additional options

Dump1090 can be called with other command line options to set a different gain, frequency, and so forth. For a list of options use:

./dump1090 --help

Everything is not documented here should be obvious, and for most users calling it without arguments at all is the best thing to do.

Reliability

By default Dump1090 tries to fix single bit errors using the checksum. Basically the program will try to flip every bit of the message and check if the checksum of the resulting message matches.

This is indeed able to fix errors and works reliably in my experience, however if you are interested in very reliable data I suggest to use the --no-fix command line switch in order to disable error fixing.

Performances and sensibility of detection

In my limited experience Dump1090 was able to decode a big number of messages even in conditions where I encountered problems using other programs, however no formal test was performed so I can't really claim that this program is better or worse compared to other similar programs.

If you can capture traffic that Dump1090 is not able to decode properly, drop me an email with a download link. I may try to improve the detection during my free time (this is just an hobby project).

Network server features

By enabling the networking support with --net Dump1090 starts listening for clients connections on port 30002 and 30001 (you can change both the ports if you want, see --help output).

Port 30002

Connected clients are served with data ASAP as they arrive from the device (or from file if --ifile is used) in the raw format similar to the following:

*8D451E8B99019699C00B0A81F36E;

Every entry is separated by a simple newline (LF character, hex 0x0A).

Port 30001

Port 30001 is the raw input port, and can be used to feed Dump1090 with data in the same format as specified above, with hex messages starting with a * and ending with a ; character.

So for instance if there is another remote Dump1090 instance collecting data it is possible to sum the output to a local Dump1090 instance doing something like this:

nc remote-dump1090.example.net 30002 | nc localhost 30001

It is important to note that what is received via port 30001 is also broadcasted to clients listening to port 30002.

In general everything received from port 30001 is handled exactly like the normal traffic from RTL devices or from file when --ifile is used.

It is possible to use Dump1090 just as an hub using --ifile with /dev/zero as argument as in the following example:

./dump1090 --net-only

Or alternatively to see what's happening on the screen:

./dump1090 --net-only --interactive

Then you can feed it from different data sources from the internet.

Port 30003

Connected clients are served with messages in SBS1 (BaseStation) format, similar to:

MSG,4,,,738065,,,,,,,,420,179,,,0,,0,0,0,0
MSG,3,,,738065,,,,,,,35000,,,34.81609,34.07810,,,0,0,0,0

This can be used to feed data to various sharing sites without the need to use another decoder.

Antenna

Mode S messages are transmitted in the 1090 Mhz frequency. If you have a decent antenna you'll be able to pick up signals from aircrafts pretty far from your position, especially if you are outdoor and in a position with a good sky view.

You can easily build a very cheap antenna following the istructions at:

http://antirez.com/news/46

With this trivial antenna I was able to pick up signals of aircrafts 200+ Km away from me.

If you are interested in a more serious antenna check the following resources:

Aggressive mode

With --aggressive it is possible to activate the aggressive mode that is a modified version of the Mode S packet detection and decoding. THe aggresive mode uses more CPU usually (especially if there are many planes sending DF17 packets), but can detect a few more messages.

The algorithm in aggressive mode is modified in the following ways:

The use of aggressive mdoe is only advised in places where there is low traffic in order to have a chance to capture some more messages.

Debug mode

The Debug mode is a visual help to improve the detection algorithm or to understand why the program is not working for a given input.

In this mode messages are displayed in an ASCII-art style graphical representation, where the individial magnitude bars sampled at 2Mhz are displayed.

An index shows the sample number, where 0 is the sample where the first Mode S peak was found. Some additional background noise is also added before the first peak to provide some context.

To enable debug mode and check what combinations of packets you can log, use mode1090 --help to obtain a list of available debug flags.

Debug mode includes an optional javascript output that is used to visualize packets using a web browser, you can use the file debug.html under the 'tools' directory to load the generated frames.js file.

How this program works?

The code is very documented and written in order to be easy to understand. For the diligent programmer with a Mode S specification on his hands it should be trivial to understand how it works.

The algorithms I used were obtained basically looking at many messages as displayed using a trow-away SDL program, and trying to model the algorithm based on how the messages look graphically.

How to test the program?

If you have an RTLSDR device and you happen to be in an area where there are aircrafts flying over your head, just run the program and check for signals.

However if you don't have an RTLSDR device, or if in your area the presence of aircrafts is very limited, you may want to try the sample file distributed with the Dump1090 distribution under the "testfiles" directory.

Just run it like this:

./dump1090 --ifile testfiles/modes1.bin

What is --strip mode?

It is just a simple filter that will get raw IQ 8 bit samples in input and will output a file missing all the parts of the file where I and Q are lower than the specified <level> for more than 32 samples.

Use it like this:

cat big.bin | ./dump1090 --snip 25 > small.bin

I used it in order to create a small test file to include inside this program source code distribution.

Contributing

Dump1090 was written during some free time during xmas 2012, it is an hobby project so I'll be able to address issues and improve it only during free time, however you are incouraged to send pull requests in order to improve the program. A good starting point can be the TODO list included in the source distribution.

Credits

Dump1090 was written by Salvatore Sanfilippo antirez@gmail.com and is released under the BSD three clause license.