Home

Awesome

About spf_fetch

The spf_fetch project is a collection of utilities to make managing greylisting easier.

Greylisting is a technique for defeating spam by temporarily rejecting email unknown senders. Well-behaved mail servers will try again after a short interval, per the RFC. Spammers will usually move on and not try again. Once the rejected server tries again, it's ip address is added to a list of known-good mail servers for a period time, often a month or longer.

One of the problem with greylisting, however, is that large senders like Google, Microsoft, Yahoo and others have multiple outbound mail servers and do not often retry from the same host, ip address or block of ip addresses. This results in the greylisting software rejecting the mailer numerous times until the email is redelivered by one of the already greylisted ip addresses.

One naive technique for pre-greylisting large mailers like Google is to add their MX records to the approved senders list. Unfortunately, large companies rarely use the same servers and ip addresses for both sending and receiving.

The spf_fetch project uses a simple technique for pre-determining which ip addresses and blocks of addresses to add to the approved list: SPF records. Sender Policy Framework record are DNS entries that list ip addresses and blocks of ip addresses that the company will send email from. Not all companies have SPF records, but many do. Nearly all the large companies like Google and Yahoo do, in part because they helped define the SPF standard.

Looking up SPF records is not a simple matter of typing dig gmail.com SPF. SPF records are not a record type. They're stored as TXT fields and have to be parsed. They can include the records from another domain or redirect to another domain. To get the full list of ip addresses authorized to send on behalf of a domain requires multiple recursive lookups.

This is where spf_fetch comes in.

spf_fetch

spf_fetch is a utility to recursively look-up SPF records from a list of domains. The output is a list of IPv4 and IPv6 addresses and blocks. This list can be used to create a whitelist of outbound MTA addresses for email greylisting utilities like OpenBSD spamd(8).

Features

See the man page for further details.

Filters

spf_fetch can now run user-supplied filters to process, transform or remove addresses after lookup but before returning them to stdout

Ships with filters/filter_sipcalc to validate IPv4 and IPv6 addresses.

Note: The filter requires sipcalc so is not run without explicitly adding with command-line parameter -t filters/filter_sipcalc.

Example Output

Given a list of domains like in the examples/example_domains:

gmail.com
gmx.com
googlemail.com
google.com

spf_fetch will return:

#IPs for gmail.com...
#IPs for gmx.com...
213.165.64.0/23
74.208.5.64/26
74.208.122.0/26
212.227.126.128/25
212.227.15.0/24
212.227.17.0/27
74.208.4.192/26
82.165.159.0/24
217.72.207.0/27
#IPs for googlemail.com...
#IPs for google.com...
#IPs for _spf.google.com...
#IPs for _netblocks.google.com...
64.18.0.0/20
64.233.160.0/19
66.102.0.0/20
66.249.80.0/20
72.14.192.0/18
74.125.0.0/16
108.177.8.0/21
173.194.0.0/16
207.126.144.0/20
209.85.128.0/17
216.58.192.0/19
216.239.32.0/19
#IPs for _netblocks2.google.com...
#IPs for _netblocks3.google.com...
172.217.0.0/19

Each domain from the list and all domains discovered as include or redirect domains in the SPF records will be recursively looked up to get their relevant IPs addresses.

Where To Get A Good List of Domains

To get a good list of domains, see the github mailcheck (https://github.com/mailcheck/mailcheck/wiki/List-of-Popular-Domains)

See file common_domains for a properly formatted version of the file.

spf_update_pf

spf_update_pf is a utility that will call spf_fetch with a file of domains that should be whitelisted and add them to a table in OpenBSD pf(4).

spf_update_pf defaults to look for a file called common_domains in /etc/mail. It will call spf_fetch with the file as the input and redirect the output to a file called common_domains_ips in /etc/mail.

spf_update_pf defaults to add the ip addresses to a table called common_white defined in pf.conf(5).

Features

See the man page for further details.

Upgrading

The output from spf_update_pf is now directed to common_domains_ips rather than the previous common_domains_white. If you're using a pf(5) table you'll want to rewrite line in pf.conf(5) to something like:

table <common_white> persist file "/etc/mail/common_domains_ips"

spf_mta_capture

spf_mta_capture is an experimental utility to watch a log file to capture the domains of all outbound mail. It will then retrieve the SPF records for the domain by calling spf_fetch and then add them to a table in pf(5).

At the moment, spf_mta_capture only parses log files created by OpenSMTPD.

spf_mta_capture is meant to run as a pipe program by syslogd(8).

Features

See the man page for further details.

Copyright and License

Copyright (c) 2016-2017 Aaron Poffenberger akp@hypernote.com

Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies.

THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

Updates and Suggestions

Let me know by Issue or email if you find bugs or other problems.