Home

Awesome

Mu explores ways to turn arbitrary manual tests into reproducible automated tests. Hoped-for benefits:

  1. Projects release with confidence without requiring manual QA or causing regressions for their users.

  2. Open source projects become easier for outsiders to comprehend, since they can more confidently try out changes with the knowledge that they'll get rapid feedback if they break something. Projects also become more rewrite-friendly for insiders: it's easier to leave your project's historical accidents and other baggage behind if you can be confident of not causing regressions.

  3. It becomes easier to teach programming by emphasizing tests far earlier than we do today.

The hypothesis is that designing the entire system to be testable from day 1 and from the ground up would radically impact the culture of an eco-system in a way that no bolted-on tool or service at higher levels can replicate. It would make it easier to write programs that can be easily understood by newcomers. It would reassure authors that an app is free from regression if all automated tests pass. It would make the stack easy to rewrite and simplify by dropping features, without fear that a subset of targeted apps might break. As a result people might fork projects more easily, and also exchange code between disparate forks more easily (copy the tests over, then try copying code over and making tests pass, rewriting and polishing where necessary). The community would have in effect a diversified portfolio of forks, a “wavefront” of possible combinations of features and alternative implementations of features instead of the single trunk with monotonically growing complexity that we get today. Application writers who wrote thorough tests for their apps (something they just can’t do today) would be able to bounce around between forks more easily without getting locked in to a single one as currently happens.

In this quest, Mu is currently experimenting with the following mechanisms:

  1. New, testable interfaces for the operating system. Currently manual tests are hard to automate because a file you rely on might be deleted, the network might go down, etc. To make manual tests reproducible it suffices to improve the 15 or so OS syscalls through which a computer talks to the outside world. We have to allow programs to transparently write to a fake screen, read from a fake disk/network, etc. In Mu, printing to screen explicitly takes a screen object, so it can be called on the real screen, or on a fake screen inside tests, so that we can then check the expected state of the screen at the end of a test. Here's a test for a little text-mode chessboard program in Mu (delimiting the edge of the 'screen' with dots):

          <img alt='a screen test' src='html/chessboard-test.png'>

    We've built up similarly dependency-injected interfaces to the keyboard, mouse, disk and network.

  2. Support for testing side-effects like performance, deadlock-freedom, race-freeness, memory usage, etc. Mu's white-box tests can check not just the results of a function call, but also the presence or absence of specific events in the log of its progress. For example, here's a test that our string-comparison function doesn't scan individual characters unless it has to:

          <img alt='white-box test' src='html/tracing-test.png'>

    Another example: if a sort function logs each swap, a performance test can check that the number of swaps doesn't quadruple when the size of the input doubles.

    Besides expanding the scope of tests, this ability also allows more radical refactoring without needing to modify tests. All Mu's tests call a top-level function rather than individual sub-systems directly. As a result the way the subsystems are invoked can be radically changed (interface changes, making synchronous functions asynchronous, etc.). As long as the new versions emit the same implementation-independent events in the logs, the tests will continue to pass. (More information.)

  3. Organizing code and tests in layers of functionality, so that outsiders can build simple and successively more complex versions of a project, gradually enabling more peripheral features. Think of it as a cleaned-up git log for the project. (More information.)

These mechanisms exist in the context of a low-level statement-oriented language (like Basic, or Assembly). The language is as powerful as C for low-level pointer operations and manual memory management, but much safer, paying some run-time overhead to validate pointers. It also provides a number of features usually associated with higher-level languages: strong type-safety, function overloading, lexical scope, generic functions, higher-order functions, and delimited continuations.

Taking Mu for a spin

Mu is currently implemented in C++ and requires a Unix-like environment. It's been tested on Ubuntu, Mac OS X and OpenBSD; on x86, x86_64 and ARMv7; and on recent versions of GCC and Clang. Since it uses no bleeding-edge language features and has no exotic dependencies, it should work with most reasonable versions, compilers or processors.

Build Status

Running Mu will always (re)compile it if necessary:

$ cd mu
$ ./mu

As a simple example, here's a program with some arithmetic:

<img alt='code example' src='html/example1.png'>

Mu functions are lists of instructions, one to a line. Each instruction operates on some ingredients and returns some products.

[products] <- instruction [ingredients]

Product and ingredient reagents cannot contain instructions or infix expressions. On the other hand, you can have any number of them. In particular, you can have any number of products. For example, you can perform integer division as follows:

quotient:number, remainder:number <- divide-with-remainder 11, 3

Each reagent consists of a name and its type, separated by a colon. You only have to specify the type the first time you mention a name, but you can be more explicit if you choose. Types can be multiple words and even arbitrary trees, like:

x:array:number:3  # x is an array of 3 numbers
y:list:number  # y is a list of numbers
# ':' is just syntactic sugar
{z: (map (address array character) (list number))}   # map from string to list of numbers

Try out the program now:

$ ./mu example1.mu
$

Not much to see yet, since it doesn't print anything. To print the result, try adding the instruction $print a to the function.

Here's a second example, of a function that can take ingredients:

<img alt='fahrenheit to celsius' src='html/f2c-1.png'>

Functions can specify headers showing their expected ingredients and products, separated by -> (unlike the <- in calls).

Once defined, functions can be called just like primitives. No need to mess with a CALL instruction or push/pop arguments to the stack.

Since Mu is a low-level VM language, it provides extra control at the cost of verbosity. Using local-scope, you have explicit control over stack frames to isolate your functions in a type-safe manner. You can also create more sophisticated setups like closures. One consequence of this extra control: you have to explicitly load-ingredients after you set up the stack.

An alternative syntax is what the above example is converted to internally:

<img alt='fahrenheit to celsius desugared' src='html/f2c-2.png'>

The header gets dropped after checking types at call-sites, and after replacing load-ingredients with explicit instructions to load each ingredient separately, and to explicitly return products to the caller. After this translation functions are once again just lists of instructions.

This alternative syntax isn't just an implementation detail. It turns out to be easier to teach functions to non-programmers by starting with this syntax, so that they can visualize a pipe from caller to callee, and see the names of variables get translated one by one through the pipe.

A third example, this time illustrating conditionals:

<img alt='factorial example' src='html/factorial.png'>

In spite of how it looks, this is still just a list of instructions and labels. Internally, the instructions break and loop get converted to jump instructions to after the enclosing } or { labels, respectively.

Try out the factorial program now:

$ ./mu factorial.mu
result: 120  # factorial of 5

You can also run its unit tests:

$ ./mu test factorial.mu

Here's what one of the tests inside factorial.mu looks like:

<img alt='test example' src='html/factorial-test.png'>

Every test conceptually spins up a really lightweight virtual machine, so you can do things like check the value of specific locations in memory. You can also print to screen and check that the screen contains what you expect at the end of a test. For example, you've seen earlier how chessboard.mu checks the initial position of a game of chess (delimiting the edges of the screen with dots):

<img alt='screen test' src='html/chessboard-test.png'>

Similarly you can fake the keyboard to pretend someone typed something:

<img alt='fake keyboard' src='html/fake-keyboard.png'>

..or clicked somewhere:

<img alt='fake console (keyboard, mouse, ..)' src='html/fake-console.png'>

Within tests you can map arbitrary paths (local files or URLs) to contents:

<img alt='fake file-system and network' src='html/resources.png'>

As we add graphics, audio, and so on, we'll augment scenarios with corresponding abilities.

Mu assumes that all ingredients passed in to functions are immutable by default -- unless they are also products. So this program will throw an error:

<img alt='immutable ingredient triggering an error' src='html/immutable-error.png'>

To modify foo's ingredient, you have to add it to the list of products returned:

<img alt='mutable ingredient' src='html/mutable.png'>

The names of the variables are important here: a function that takes an (immutable) address and returns a different one is different from a function that takes a mutable address (and also returns it).

These immutability checks can be annoying, but the benefit they provide is that you can always tell what a function modifies just by looking at its header. In combination with dependency-injected hardware, they provide all the benefits of referential transparency that we typically associate with purely functional languages -- along with the option of imperatively modifying variables willy-nilly.

You can append arbitrary properties to reagents besides types. Just separate them with slashes.

x:array:number:3/uninitialized
y:string/tainted:yes
z:number/assign-once:true/assigned:false

Most properties are meaningless to Mu, and it'll silently skip them when running, but they are fodder for meta-programs to check or modify your programs, a task other languages typically hide from their programmers. For example, where other programmers are restricted to the checks their type system permits and forces them to use, you'll learn to create new checks that make sense for your specific program. If it makes sense to perform different checks in different parts of your program, you'll be able to do that.

You can imagine each reagent as a table, rows separated by slashes, columns within a row separated by colons. So the last example above would become something like this:

z           : number   /
assign-once : true     /
assigned    : false

An alternative way to define factorial is by inserting labels and later inserting code at them.

<img alt='literate programming' src='html/tangle.png'>

(You'll find this version in tangle.mu.)

By convention we use the prefix '+' to indicate function-local label names you can jump to, and surround in '<>' global label names for inserting code at.

Another example, this time with concurrency:

<img alt='forking concurrent routines' src='html/fork.png'> 
$ ./mu fork.mu

Notice that it repeatedly prints either '34' or '35' at random. Hit ctrl-c to stop.

Yet another example forks two 'routines' that communicate over a channel:

$ ./mu channel.mu
produce: 0
produce: 1
produce: 2
produce: 3
consume: 0
consume: 1
consume: 2
produce: 4
consume: 3
consume: 4

# The exact order above might shift over time, but you'll never see a number
# consumed before it's produced.

Channels are the unit of synchronization in Mu. Blocking on a channel is the only way for the OS to put a task to sleep. The plan is to do all I/O over channels.

Routines are expected to communicate purely by message passing, though nothing stops them from sharing memory since all routines share a common address space. However, idiomatic Mu will make it hard to accidentally read or clobber random memory locations. Bounds checking is baked deeply into the semantics, and using pointers after freeing them immediately fails.

Mu has a programming environment:

$ ./mu edit

Screenshot:

<img alt='programming environment' src='html/edit.png'>

You write functions on the left and try them out in sandboxes on the right. Hit F4 to rerun all sandboxes with the latest version of the code. More details: http://akkartik.name/post/mu. Beware, it won't save your edits by default. But if you create a sub-directory called lesson/ under mu/ it will. If you turn that directory into a git repo with git init, it will also back up your changes each time you hit F4. Use the provided new_lesson script to take care of these details.

Once you have a sandbox you can click on its result to mark it as expected:

<img alt='expected result' src='html/expected-result.png'>

Later if the result changes it'll be flagged in red to draw your attention to it. Thus, manually tested sandboxes become reproducible automated tests.

<img alt='unexpected result' src='html/unexpected-result.png'>

Another feature: Clicking on the code in a sandbox expands its trace for you to browse. To add to the trace, use stash. For example:

stash [first ingredient is], x

Invaluable at times for understanding program behavior, but it won't clutter up your screen by default.

If you're still reading, here are some more things to check out:

a) Look at the chessboard program for a more complex example with tests of blocking reads from the keyboard and what gets printed to the screen -- things we don't typically associate with automated tests.

b) Try running the tests:

$ ./mu test

c) Check out the programming environment, the largest app built so far in Mu.

d) Check out the tracing infrastructure which gives you a maps-like zoomable UI for browsing Mu's traces:

$ ./mu --trace nqueens.mu  # just an example
saving trace to 'last_run'
$ ./browse_trace/browse_trace last_run
# hit 'q' to exit

For more details see the Readme.

e) Look at the build scripts. Mu's compilation process is itself designed to support staged learning. Each of the scripts (build0, build1, build2, etc.) is self-contained and can compile the project by itself. Successive versions add new features and configurability -- and complexity -- to the compilation process.

f) Try skimming the colorized source code. You should be able to get a pretty good sense for how things work just by skimming the files in order, skimming the top of each file and ignoring details lower down. Some details on my unconventional approach to organizing projects.

Credits

Mu builds on many ideas that have come before, especially: