Awesome

WASI SDK

Quick Start

About this repository

This repository contains no compiler or library code itself; it uses git submodules to pull in the upstream Clang and LLVM tree, as well as the wasi-libc tree.

The libc portion of this SDK is maintained in wasi-libc.

Upstream Clang and LLVM (from 9.0 onwards) can compile for WASI out of the box, and WebAssembly support is included in them by default. So, all that's done here is to provide builds configured to set the default target and sysroot for convenience.

One could also use a standard Clang installation, build a sysroot from the sources mentioned above, and compile with --target=wasm32-wasi --sysroot=/path/to/sysroot. In this scenario, one would also need the libclang_rt.builtins-wasm32.a objects available separately in the release downloads which must be extracted into $CLANG_INSTALL_DIR/$CLANG_VERSION/lib/wasi/.

Clone

This repository uses git submodule, to clone it you need use the command below :

git clone --recursive https://github.com/WebAssembly/wasi-sdk.git

Requirements

The Wasm-sdk's build process needs some packages :

cmake
clang
ninja
python3

Please refer to your OS documentation to install those packages.

Build

Building wasi-sdk uses CMake and is split into two halves. First you can build the toolchain itself:

cmake -G Ninja -B build/toolchain -S . -DWASI_SDK_BUILD_TOOLCHAIN=ON -DCMAKE_INSTALL_PREFIX=build/install
cmake --build build/toolchain --target install

When you're developing locally you may also wish to pass -DCMAKE_CXX_COMPILER_LAUNCHER=ccache to assist with rebuilds. Other supported CMake flags are:

-DLLVM_CMAKE_FLAGS - extra flags to pass to cmake when building LLVM/Clang.
-DRUST_TARGET - the specific Rust target triple to build wasm-component-ld for, useful for cross-compiles.

The clang compiler should now be located at build/install/bin/clang but it's just a compiler, the sysroot isn't built yet. Next the second step of the build is to build the sysroot:

cmake -G Ninja -B build/sysroot -S . \
    -DCMAKE_INSTALL_PREFIX=build/install \
    -DCMAKE_TOOLCHAIN_FILE=build/install/share/cmake/wasi-sdk.cmake \
    -DCMAKE_C_COMPILER_WORKS=ON \
    -DCMAKE_CXX_COMPILER_WORKS=ON
cmake --build build/sysroot --target install

A full toolchain should now be present at build/install and is ready for use in compiling WebAssembly code. Supported CMake flags are:

-DWASI_SDK_DEBUG_PREFIX_MAKE=OFF - disable -fdebug-prefix-map when building C/C++ code to use full host paths instead.
-DWASI_SDK_INCLUDE_TESTS=ON - used for building tests.
-DWASI_SDK_TEST_HOST_TOOLCHAIN=ON - test the host toolchain's wasi-libc and sysroot libraries, don't build or use fresh libraries for tests.
-DWASI_SDK_TARGETS=.. - a list of targets to build, by default all WASI targets are compiled.
-DWASI_SDK_INSTALL_TO_CLANG_RESOURCE_DIR=ON - install compiler-rt to the compiler's resource directory. might be convenient if you want to use the toolchain (eg. ./build/install/bin/clang) in-place.

If you'd like to build distribution artifacts you can use the dist target like so:

cmake --build build/toolchain --target dist
cmake --build build/sysroot --target dist

Tarballs will be created under build/toolchain/dist and build/sysroot/dist. Note that these are separate tarballs for the toolchain and sysroot. To create a single tarball for the entire SDK you'll first want to copy all tarballs into a new folder and then run the ./ci/merge-artifacts.sh script:

mkdir dist-my-platform
cp build/toolchain/dist/* build/sysroot/dist/* dist-my-platform
./ci/merge-artifacts.sh

This will produce dist/wasi-sdk-*.tar.gz which is the same as the release artifacts for this repository.

Finally you can additionally bundle many of the above steps, minus merge-artifact.sh by using the CI script to perform both the toolchain and sysroot build:

./ci/build.sh

The built package can be found into build/dist directory. For releasing a new version of the package on GitHub, see RELEASING.md.

Install

A typical installation from the release binaries might look like the following:

WASI_OS=linux
WASI_ARCH=x86_64
WASI_VERSION=24
WASI_VERSION_FULL=${WASI_VERSION}.0
wget https://github.com/WebAssembly/wasi-sdk/releases/download/wasi-sdk-${WASI_VERSION}/wasi-sdk-${WASI_VERSION_FULL}-${WASI_ARCH}-${WASI_OS}.tar.gz
tar xvf wasi-sdk-${WASI_VERSION_FULL}-${WASI_ARCH}-${WASI_OS}.tar.gz

Use

Use the clang installed in the wasi-sdk directory:

WASI_SDK_PATH=`pwd`/wasi-sdk-${WASI_VERSION_FULL}-${WASI_ARCH}-${WASI_OS}
CC="${WASI_SDK_PATH}/bin/clang --sysroot=${WASI_SDK_PATH}/share/wasi-sysroot"
$CC foo.c -o foo.wasm

Note: ${WASI_SDK_PATH}/share/wasi-sysroot contains the WASI-specific includes/libraries/etc. The --sysroot=... option is not necessary if WASI_SDK_PATH is /opt/wasi-sdk. For troubleshooting, one can replace the --sysroot path with a manual build of wasi-libc.

Integrating with a CMake build system

Use a toolchain file to setup the wasi-sdk platform.

$ cmake -DCMAKE_TOOLCHAIN_FILE=${WASI_SDK_PATH}/share/cmake/wasi-sdk.cmake ...

or the wasi-sdk-thread platform

$ cmake -DCMAKE_TOOLCHAIN_FILE=${WASI_SDK_PATH}/share/cmake/wasi-sdk-pthread.cmake ...

Notes for Autoconf

Autoconf 2.70 now recognizes WASI.

For convenience when building packages that aren't yet updated, updated config.sub and config.guess files are installed at share/misc/config.* in the install directory.

Docker Image

We provide a docker image including WASI SDK that can be used for building projects without a separate installation of the SDK. Autotools, CMake, and Ninja are included in this image, and standard environment variables are set to use WASI SDK for building.

For example, this command can build a make-based project with the Docker image.

docker run -v `pwd`:/src -w /src ghcr.io/webassembly/wasi-sdk make

Take note of the notable limitations below when building projects, for example many projects will need threads support disabled in a configure step before building with WASI SDK.

Notable Limitations

This repository does not yet support C++ exceptions. C++ code is supported only with -fno-exceptions for now. Work on support for exception handling is underway at the language level which will support the features.

See C setjmp/longjmp support about setjmp/longjmp support.

This repository experimentally supports threads with --target=wasm32-wasi-threads. It uses WebAssembly's threads primitives (atomics, wait/notify, shared memory) and wasi-threads for spawning threads. Note: this is experimental — do not expect long-term stability!

This repository does not yet support dynamic libraries. While there are some efforts to design a system for dynamic libraries in wasm, it is still in development and not yet generally usable.

There is no support for networking. It is a goal of WASI to support networking in the future though.