Awesome

STM32F4x1 MiniF4 / WeAct Studio 微行工作室 出品

• 中文版本

STM32F401CCU6 / STM32F401CEU6 / STM32F411CEU6 Core Board

Where to buy

1. TaoBao WeAct Studio official store
2. AliExpress WeAct Studio Official Store

None of the boards received without Logo WeAct Studio && version number are produced by us. If there are any quality problems or technical problems, please find the seller to solve them by yourself. It is best to report them and comment on them, so as not to deceive others!!

We do not produce the boards that we received without the Logo WeAct Studio && version number.

Our Boards

• 411 adopts lead-free gold-sinking process, 401 adopts lead-free process, and the needles are gold-plated. All materials conform to ROHS standard, and lead is harmful to health, while piracy USES lead for profit

• All use the latest batch of chips to give customers the best product experience

• 25MHZ high speed crystal vibration & 32.768khz low speed crystal vibration adopt high quality metal shell crystal vibration, the starting effect is better

• Flash disk is reserved to meet the needs of big data storage and microPython. USBDisk&&FATFFS routine is provided

• Support for MicroPython programming with available MicroPython firmware

• Support for Arduino programming, see detailsGithub

• Version V3.1, there are three keys, reset key, BOOT0 key, user key

We are committed to always use the best raw material, using the latest chips, users get the best user experience, improve the efficiency of development.

Our Board Packaging

The parameters of the board chip we produced are compared

Pin distribution diagram

Thanks, Richard·Balint !!

With the pin allocation diagram, it's easier to work with MicroPython and Arduino!

MicroPython

• version: V1.12-35

STM32F401CEU6 Supported
STM32F411CEU6 Supported.

Board Definition

STM32F401CE: /SDK/STM32F401CEU6/MicroPython/WeAct_F411CE
STM32F411CE: /SDK/STM32F411CEU6/MicroPython/WeAct_F411CE

HID Flash

supported in English and Chinese

Enter the HID bootloader method:

1. Hold down the <KEY>, power on or reset again, and the C13 LED will blink to release
2. APP enters the bootloader reference stm32f401_test_APP 0x8004000.zip project
3. More instructions

How to enter ISP mode

• Method 1: When the power is on, press the BOOT0 key and the reset key, then release the reset key, and release the BOOT0 key after 0.5 seconds
• Method 2: When the power is off, hold down the BOOT0 key, and release the BOOT0 at 0.5s after the power is on
• DFU Mode: Use the data line to connect to the computer. If there is an unrecognized problem, you can heat the chip appropriately (25°C) and then re-enter the ISP mode
• Serial Port Mode: Connect PA9 and PA10 of core board with USB serial port
• Soft: STM32CubeProg。

Chip information

STM32F411CE	STM32F401CC	STM32F401CE
Date Code	Date Code	Date Code
014 (2020.06)	End Of Life	934&935 (2020.06)
947&002 (2020.03)	609&608
946&947 (2020.01)	723 (2020.01)
19+ (2019)	16+ (2019)

All chips are functional and original

Board Shape