Home

Awesome

Actions Status

Skipper

Introduction

Use Skipper to build & test your project in an isolated environment, using Docker containers with pre-defined sane configuration. Skipper allows you to execute makefile targets inside a container (or just run arbitrary commands). You can also use Skipper to build your development and production containers.

Installation

It is recommended to install Skipper directly from PyPi:

sudo pip install strato-skipper

You can also install Skipper from source:

git clone http://github.com/Stratoscale/skipper
sudo make install

Configure bash completion for skipper by sourcing the completion script in your ~/.bashrc file:

echo 'source <(skipper completion)' >>~/.bashrc

Python3 Environment

Skipper supports building and running in Python3 environment Set your locale to UTF-8:

export LC_ALL="en_US.UTF-8"
export LANG="en_US.UTF-8"

Usage

Skipper can serve as your primary tool for your daily development tasks:

Global Options

  -v, --verbose                 Increase verbosity
  --registry                    URL of the docker registry
  --build-container-image       Image to use as build container
  --build-container-tag         Tag of the build container
  --build-container-net         Network to connect the build container (default: net=host)
  --help                        Show this message and exit.

Build

As a convention, skipper infers the docker images from the Dockerfiles in the top directory of your repository. For example, assuming that there are 3 Dockerfile in the top directory of the repository:

Dockerfile.service1
Dockerfile.service2
Dockerfile.development

To build the image that corresponeds to Dockerfile.service1, run:

skipper build service1

In the same way you can build the image corresponded to Dockerfile.development:

skipper build development

You can also build mutliple images with single command:

skipper build development service2

A context path can be added to the build command, The build’s context is the files at a specified location PATH, the default is current directory:

skipper buid service1 --container-context /path/to/context/dir

If no image is specifed skipper will build all detected images:

skipper build

If you don't want to store all the Dockerfiles under the top directory of the project, you can specify the project's containers in skipper's config file (see below).

Push

Once you've built the images of your repositories as described above. You can publish them by pushing them to the registry. To push the service1 image, run:

skipper --registry some-registry push service1

Note that the registry in this command must be the same registry used while building the image.

Images

To list local images of your repository, run:

skipper images

In order to also list also images that were pushed to the registry, run:

skipper --registry some-registry images -r

Rmi

To delete an image of your repository, run:

skipper rmi service1 <tag>

In order to delete the image from the registry, run:

skipper --registry some-registry rmi -r service1 <tag>

Make

You can execute a Makefile target inside a container. This is good for keeping the development in an isolated environment, without installing development tools on the host. Once a development container is defined and built, it can be shared among the team member, assuring all of them use exactly thg same development environment. Assuming your project has a Makefile with a tests target, you can run:

skipper --registry some-registry --build-container-image development --build-container-tag latest \
make tests

If your Makefile is not standard (i.e. Makefile.arm32) you can pass it to the make command:

skipper --registry some-registry --build-container-image development --build-container-tag latest \
make -f Makefile.arm32 tests

Run

You can also run arbitrary commands inside your containers.

skipper --registry some-registry --build-container-image development --build-container-tag latest \
run gcc myprog.c -o myprog 

Shell

You can get a shell inside your containers.

skipper --registry some-registry --build-container-image development --build-container-tag latest \
shell

Configuration File

Skipper allows you to define commonly used parameters in a configuration file skipper.yaml at the top directory of your repositry.

registry: some-registry 
build-container-image: development
build-container-tag: latest
container-context: /path/to/context/dir

make: 
    makefile: Makefile.arm32
containers:
    service1: path/to/service1/dockerfile
    service2: path/to/service2/dockerfile
env:
    VAR: value

Using the above configuration file, we now can run a simplified version of the make command described above:

skipper make tests

Environment variables:

For shell, run & make commands: You can use -e in order to pass environment variables to the container.

skipper make -e regex=test1 tests

Your configuration file can contain environment variables, Skipper will set the specified environment variables in the container.

env:
    VAR: value

Variable substitution:

Skipper uses the variable values from the shell environment in which skipper is run. It’s possible to use environment variables in your shell to populate values For example, suppose the shell contains EXTERNAL_PORT=5000 and you supply this configuration:

env:
    EXTERNAL_PORT: $EXTERNAL_PORT

When you run Skipper command with this configuration, Skipper looks for the EXTERNAL_PORT environment variable in the shell and substitutes its value in.In this example, Skipper resolves the $EXTERNAL_PORT to "5000" and will set EXTERNAL_PORT=5000 environment in the container.

If an environment variable is not set, Skipper substitutes with an empty string.

Both $VARIABLE and ${VARIABLE} syntax are supported. Extended shell-style features, such as ${VARIABLE-default} and ${VARIABLE/foo/bar}, are not supported.

You can use a $$ (double-dollar sign) when your configuration needs a literal dollar sign. This also prevents Skipper from interpolating a value, so a $$ allows you to refer to environment variables that you don’t want processed by Skipper.

env:
    VAR: $$VAR_NOT_INTERPOLATED

Volumes:

Skipper can bind-mount a host directory into the container. you can add volumes in the configuration file:

volumes:
  - /tmp:/tmp:rw
  - ${HOME}/.netrc:/root/.netrc
  - ${HOME}/.gocache:/tmp/.gocache

Workdir:

Skipper default to the the project directory as the working directory for the run, make and shell commands, you can override the workdir by specifying it in the configuration file:

workdir: /path/to/workdir

Workspace:

Skipper default to the the project base directory (e.g. /path/to/project/../) as the workspace for the run, make and shell commands, Note that the workspace directory is mounted by default. you can override the workspace directory by specifying it in the configuration file

workdir: $PWD