Awesome
MSI-H270-RX470_mod_570-Hackintosh
EFI H270 MSI Gaming M3 + Intel I5 7600 with OpenCore bootloader
Computer Spec:
| Component | Brank |
|---|---|
| CPU | Intel i5 7600 (4C-4T 6MB) KBL |
| iGPU | Intel® Graphics HD 630 |
| GPU | RX 470/570 Sapphire Nitro+ 4GB |
| Audio | Realtek ALC1220 |
| Ram | 16 GB DDR4 2400 Mhz |
| Wifi + Bluetooth | Fenvi PCIe Wifi t919 1750 Mbps |
| Lan | Killer 2500 2.5G |
| NVme | Sabrent Rocket 256G. ( MacOS ) |
| SSD | SPCC Silicon Power 128G ( Win ) |
| HDD | WD 2 Tera |
| SmBios | iMac 18,3 |
| BootLoader | OpenCore 0.6.9 |
| macOS | Big Sur 11.3.1 |
Opencore (0.6.9) HakintoshLife
What works and What doesn't or WIP:
- CFG Unlock
- Intel Graphics HD iGPU (use for task only)
- ALC1220 All jack activate
- ALC1220 Combo jack external
- All USB-A 3.1 Ports (TYPE-C incluse)
- SpeedStep / Sleep / Wake
- HID Key PWRB & SLPB
- Wi-Fi and Bluetooth Fenvi T919
- Controller SATA III
- All Sensors CPU, IGPU, GPU, NVME, SATA, FAN
- NVRAM
- Recovery (macOS) boot from OpenCore
Full Native Network
Full work AirPort - AirDrop - AirPlay
Peripherals & Benchmarks
CPU Bench
iGPU Bench
GPU RX 470/570 4g
Special Config:/Users/mario/Desktop/image
- USB port mapping performed
- VBios mod GPU, convert RX 470 4g Sapphire Nitro+ To RX 570 4g (increase performance) *
See ioreg for more clarification
MacOS bootable USB creation:
- Read the Dortania guide for creating your USB from Windows or macOS
- Guide Dortania - USB creation
BIOS Setting
- Load Optimize Default
- See and set
Special VMod RX 470 4g To RX 570 4g Sapphire NItro+
DISCLAIMER!!!
This procedure involves risks for your GPU, I do not take any responsibility for it, I will limit myself only to describing. It is recommended to run this in GPU with dual bios.
The mod in question and the relative Vbios is specific for the Sapphire Nitro+ RX 470 4g with elpida memories.
GUIDE:
Run windows and download this program: GPU-Z by techpowerup and ATIFlash
after the download, look at the manufacturer of the memories; these can be elpida, micron, samsung or hynix, so as to download the most suitable V-Bios RX570 for your card for conversion.
When you are sure, download the suitable V-Bios, in my specific case this: VBios
Unzip ATIFlash and copy the previously downloaded vbios into it. At this point open the terminal as system administrator and go to the root of the ATIFlash folder and run the command:
amdvbflashWin -f -p 0 nomerom.rom
see pictures to simplify----------
temperature and frequency
Credits
- Apple for macOS.
- Acidanthera for OpenCore and all the lovely hackintosh work.
- Dortania For great and detailed guides.
- Lorys89 for Support
- Hackintoshlifeit Support group for installation and post installation.