Home

Awesome

Python I2C Driver for Sensirion SF06-LF

This repository contains the Python driver to communicate with a Sensirion sensor of the SF06-LF family over I2C.

<img src="https://raw.githubusercontent.com/Sensirion/python-i2c-sf06-lf/master/images/sensor_SLF3C_1300F.png" width="300px" alt="SF06-LF picture">

Click here to learn more about the Sensirion SF06-LF sensor family.

Not all sensors of this driver family support all measurements. In case a measurement is not supported by all sensors, the products that support it are listed in the API description.

Supported sensor types

Sensor nameI²C Addresses
SLF3C-1300F0x08
SLF3S-1300F0x08
SLF3S-0600F0x08
SLF3S-4000B0x08
LD20-0600L0x08
LD20-2600B0x08

The following instructions and examples use a SLF3C-1300F.

Connect the sensor

You can connect your sensor over a SEK-SensorBridge. For special setups you find the sensor pinout in the section below.

<details><summary>Sensor pinout</summary> <p> <img src="https://raw.githubusercontent.com/Sensirion/python-i2c-sf06-lf/master/images/SLF3x_Pinout.png" width="300px" alt="sensor wiring picture">
PinCable ColorNameDescriptionComments
1NCDo not connect
2greenSDAI2C: Serial data input / output
3redVDDSupply Voltage3.2V to 3.8V
4blackGNDGround
5yellowSCLI2C: Serial clock input
6NCDo not connect
</p> </details>

Documentation & Quickstart

See the documentation page for an API description and a quickstart example.

Contributing

We develop and test this driver using our company internal tools (version control, continuous integration, code review etc.) and automatically synchronize the master branch with GitHub. But this doesn't mean that we don't respond to issues or don't accept pull requests on GitHub. In fact, you're very welcome to open issues or create pull requests :-)

Check coding style

The coding style can be checked with flake8:

pip install -e .[test]  # Install requirements
flake8                  # Run style check

In addition, we check the formatting of files with editorconfig-checker:

pip install editorconfig-checker==2.0.3   # Install requirements
editorconfig-checker                      # Run check

License

See LICENSE.