Awesome

DJI RoboMaster S1 ROS Bridge Package

****This repository will migrate to the following repository soon!!! **** https://github.com/RoboMasterS1Challenge/robomaster_s1_ros_reference_design

This package contains a ROS node package and MINI-M4 STM32 firmware for controlling your RoboMaster S1 through the ROS network. (Nucleo-F767ZI Version is discontined.)

What is this?

You can control DJI RoboMaster S1 motion, LED, Blaster and some commands using ROS messages through ROS1 Network. Raspberry Pi 4B and stm32f4 microcontroller emulate Intelligent Controller of RoboMaster S1.

Preparation

You should prepare these items.

DJI RoboMaster S1
Ubuntu PC with STM32CubeIDE
MINI-M4 STM32
Raspberry Pi 4B
Universal board for Raspberry Pi
CAN Tranceiver breakout board (Like this https://www.amazon.co.jp/dp/B076HHVZM1)
Wire harnes, 2.54mm Socket and Pins etc.
DockerPi powerBoard (https://www.seeedstudio.com/DockerPi-PowerBoard-p-4100.html)
SONY PlayStation4(R) Controller

PS4 Controller Key Map

Left Axis : Linear X and Linear Y
Right Axis : Gimbal Pitch and Gimbal Yaw
Right Axis push : Blaster
L2 : Enable control

How to install

Install ds4drv for PlayStation4(R) Controller

$ sudo pip install ds4drv

$ git clone --recursive https://github.com/tatsuyai713/robomaster_s1_can_hack.git