Awesome
EFI-Opencore-z97n-Big-Sur
OpenCore EFI for Intel Hackintosh (macOS 10.13 - 11.00)
Gigabyte z97n WiFi + Rx 580
Specification
Component | Model |
---|---|
CPU | Intel i7-4790K (8) @ 4.00GHz |
Motherboard | GIGABYTE Z97n WiFi |
RAM | 2 x 8GB Corsair @ 2600MHz |
Audio Chipset | ALC-892 |
GPU | Radeon RX 580 |
WiFi & Bluetooth | Broadcom Mac Native |
OS Disk (SSDM2) | Kingston SSD 480GB |
macOS version: 11.0.1 (20B50) OpenCore version: 0.6.4 Beta
Credits
- [Bootloader] OpenCore
- [Driver] OpenRuntime
- [Driver] HFSPlus
- [Kext] Lilu
- [Kext] VirtualSMC
- [Kext] WhateverGreen
- [Kext] AppleALC
Compatible macOS versions
- High Sierra (10.13.x)
- Mojave (10.14.x)
- Catalina (10.15.x)
- Big Sur (10.16/11.0)
How to use
- Make your USB installer with this guide
- Clone the repository and paste "BOOT" and "OC" directories into your's pendrive "EFI" folder
- Download GenSMBIOS to generate unique SMBIOS information. Run it and select Generate SMBIOS, as the model select iMacPro1,1.
- Open config.plist with ProperTree and go to PlatformInfo > Generic. Set MLB (Board Serial), SystemSerialNumber (Serial) and SystemUUID (SmUUID) to generated values. Change ROM to your network card's MAC address without the
:
character. How to get MAC Address? - Boot it!
You CAN NOT use SMBIOS from this repository, it MUST be unique for every macOS installation
Other guides
If you have any problems with installation or booting your macOS, kernel panics or another system related issue check OC configuration guide
If something else isn't working properly (for example USB ports, iServices, DRM/Netflix) check Post-Install guide