Awesome

upy-st7789

A simple st7789 driver for 240x240 pixel IPS displays, written in micropython. This driver should be compatible with any micropython device. This repo is still under development. The driver works, but is limited in features. This driver should work with displays whether they have a chip select pin or not. Numerous decisions are made based on the pins that are supplied to the ST7789 constructor.

Community:

To officially file a bug report or feature request you can use these templates: bug report | feature request

To discus features, bugs or share your own project that utilize code in this repo: join the discussion

Ports:

st7789.py

This can be uploaded directly to the board, but is intended to be used as a frozen module. For information regarding how to setup the sdk and freeze a module you can refer to this post on the Raspberry Pi forum.

st7789.mpy

This is a cross-compiled version of st7789.py. It is intended to be uploaded to your board as you would any normal .py script.

Docs:

ST7789(spi, dc, cs, rst, bl, te, baud, bright, rot, buff)

Main ST7789 interface. It is only necessary to provide a buffer if you intend to keep a persistent buffer around to write to. In which case, it should be as follows: memoryview(bytearray(115200)). Rotation starts with the display's ribbon at the bottom of the display (0), and the display gets turned to the right once for every 90 degrees of rotation you designate in rot. This may not be to manufacturer's specs, but it is how it is with this driver. You can define rot with negative degrees and it will be converted in the rotation method (ex: -90 converts to 270).

Properties:

.buffer:memoryview

Reference to the buffer that was supplied to the constructor or None if no buffer was supplied.

Methods:

.display_en(enable)

.sleep_en(enable)

.tear_en(enable)

only operable if a tearing pin is defined

.rotation(rot)

.reset(wait)

only operable if a reset pin is defined

.backlight(bright)

only operable if a backlight pin is defined

.clear_buff(col)

only operable if a buffer was supplied to the constructor

.update_buff()

Only operable if a buffer was supplied to the constructor. This will update the display RAM with the contents of the internal buffer

.clear(col, rows)

Clear the display

.update(buff, x, y, w, h)

update a designated portion of the display RAM with the contents of the supplied buffer

Usage:

Pimoroni Pico Explorer

If you have a Pimoroni Pico Explorer you can instance the display as below.

from machine import Pin, SPI
from st7789 import ST7789

display = ST7789(
    spi     = SPI(0, sck=Pin(18, Pin.OUT), mosi=Pin(19, Pin.OUT)),
    dc      = Pin(16, Pin.OUT),
    cs      = Pin(17, Pin.OUT),
    baud    = 62_500_000,
    buff    = memoryview(bytearray(115200))
)

Test Script

The below script can be used to test that the display is working with this driver and get an idea of the performance. You will need to change my instance of ST7789 to reflect the pins your display is connected to.

from machine import Pin, SPI
from random import randint
from st7789 import ST7789

@micropython.viper
def rect(buff:ptr16, x:int, y:int, w:int, h:int, c:int):
    b, L = ptr16(buff), int(w*h)
    sx = int(x+(y*240))
    for i in range(L):
        b[sx+(240*(i//w))+i%w] = c

display = ST7789(
    spi     = SPI(0, sck=Pin(18, Pin.OUT), mosi=Pin(19, Pin.OUT)),
    dc      = Pin(17, Pin.OUT),
    rst     = Pin(21, Pin.OUT),
    bl      = Pin(20, Pin.OUT),
    baud    = 62_500_000,
    bright  = 0xFF,
    rot     = 0,
    buff    = memoryview(bytearray(115200))
)

class Thing:
    def __init__(self, x:int, y:int, w:int, h:int, c:int, sx:int, sy:int):
        self.x, self.y   = x, y
        self.w, self.h   = w, h
        self.sx, self.sy = sx, sy
        self.c = c
        self.xr = range(240-w+1)
        self.yr = range(240-h+1)
        
    def update(self):
        self.sx = self.sx if self.sx+self.x in self.xr else -self.sx
        self.sy = self.sy if self.sy+self.y in self.yr else -self.sy
        self.x += self.sx
        self.y += self.sy
        rect(display.buffer, self.x, self.y, self.w, self.h, self.c)
 
        
def make_things(cnt:int = 5):
    things = [0]*cnt
    for n in range(cnt):
        a = randint(20, 40)
        things[n] = Thing(randint(0, 240-a), randint(0, 240-a), a, a, randint(0xF000, 0xFFFF), randint(4, 8), randint(4, 8))
    return things      
        
things = make_things(50)

while True:
    display.clear_buff(randint(0x0000, 0x7F7F))
    
    for t in things:
        t.update()
    
    display.update_buff()

Tips

Overclocking a Raspberry Pi Pico can make a big difference regarding the performance you experience with any SPI device. Unfortunately, without making a change to the pico-sdk, overclocking the Pico will actually result in worse performance. If you would like to make the changes to the sdk, you can get the information in this post. There are other posts earlier in that thread which give a lot of information regarding non-obvious behavior. To make a long story short: if you aren't willing to make the changes and rebuild the firmware do not overclock your pico while running ANY SPI device. You will take a severe performance hit if you do.