Home

Awesome

Flicks

Basics

A flick (frame-tick) is a very small unit of time. It is 1/705600000 of a second, exactly.

1 flick = 1/705600000 second

This unit of time is the smallest time unit which is LARGER than a nanosecond, and can in integer quantities exactly represent a single frame duration for 24 Hz, 25 Hz, 30 Hz, 48 Hz, 50 Hz, 60 Hz, 90 Hz, 100 Hz, 120 Hz, and also 1/1000 divisions of each, as well as a single sample duration for 8 kHz, 16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, and 192kHz, as well as the NTSC frame durations for 24 * (1000/1001) Hz, 30 * (1000/1001) Hz, 60 * (1000/1001) Hz, and 120 * (1000/1001) Hz.

That above was one hell of a run-on sentence, but it's strictly and completely correct in its description of the unit.

This makes flicks suitable for use via std::chrono::duration and std::ratio for doing timing work against the system high resolution clock, which is in nanoseconds, but doesn't get slightly out of sync when doing common frame rates.

We also support some common audio sample rates as well. This list is not exhaustive, but covers the majority of digital audio formats. They are 8kHz, 16kHz, 22.05kHz, 24kHz, 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, and 192kHz.

Though it is not part of the design criteria, 144 Hz, which some newer monitors refresh at, does work correctly with flicks.

NTSC IS NOT EXPLICITLY SUPPORTED IN ALL OF ITS SUBTLE NUANCES, BUT: The NTSC variations (~23.976, ~29.97, etc) are approximately defined as 24 * 1000/1001 and 30 * 1000/1001, etc. These can be represented exactly in flicks, but 1/1000 divisions are not available.

Many folks online have pointed out that NTSC technically has a variable frame rate, and that this is handled correctly in other media playback libraries such as QuickTime. The goal of flicks is to provide a simple, convenient std::chrono::duration to work with when writing code that works with simulation and time in media, but not explicitly to handle complex variable-rate playback scenarios. So we'll stick with the 1000/1001 approximations, and leave it at that!

Details

NTSC:

Motivation

When working creating visual effects for film, television, and other media, it is common to run simulations or other time-integrating processes which subdivide a single frame of time into a fixed, integer number of subdivisions. It is handy to be able to accumulate these subdivisions to create exact 1-frame and 1-second intervals, for a variety of reasons.

Knowing that you should never, ever use floating point representations for accumulated, simulated time (lest your temporal accuracy degrade over time), the std::chrono time tools in C++ are ideal. However, the highest usable resolution, nanoseconds, doesn't evenly divide common film & media framerates. This was the genesis of this unit.

Acknowledgements

This time unit began as a technical question posted publicly on Facebook by Christopher Horvath in late 2016. Many people contributed and refined the unit, including Dan Goldman, Pascal Pincosy, Simon Eves, Kearsley Higgins, Francisco De La Torre, Benjy Feen, Eric Landreneau and Sebastian Sylwan, among others. Here's the post! https://www.facebook.com/christopher.horvath.395/posts/1157292757692660

Installation

Just place flicks.h wherever you install C++ header files - this is a header only library. Flicks are placed in the "util" namespace here, for lack of a clear alternative. It would be nice if they were in std:: someday.

Note that you can just skip all of that and put this directly into your code.


#include <chrono>
#include <ratio>
using flicks = std::chrono::duration<std::chrono::nanoseconds::rep, std::ratio<1, 705600000>>;

That's right! The entire library is technically just one line of code, if you don't worry about a few convenience functions.

Derivation

A C++ file which implements a derivation of flicks is provided - it is not required to use the library, but only to show how it was derived. A brute-force approach was intentionally used. To compile, assuming you have a C++ compiler installed, just do this:

> c++ -o flicks_derivation flicks_derivation.cpp -std=c++14; ./flicks_derivation

Test

A C++ file which tests flicks is provided - it is not required to use the library, but only to test the unit. To compile, assuming you have a C++ compiler installed, just do this:

> c++ -o flicks_test flicks_test.cpp -std=c++14; ./flicks_test

Motivating example

A C++ file demonstrating a simplified version of the production case in which we first encountered this problem is provided. It shows first a failure case, and then a fixed example using flicks. It is implemented using plain integers for illustration purposes.

> c++ -o flicks_motivation flicks_motivation.cpp -std=c++14; ./flicks_motivation

Makefile

A makefile is provided that works on a Linux-y system or OSX, but not Windows. To use it:

> make

To clean up:

> make clean

Previous Work

In a previous work lead by Sorbonne University and the French National Institute of Audiovisual, TimeRefs were defined as 1/14112000s, giving 1 TimeRef=50 Flicks. See Troncy, R., Carrive, J., Lalande, S., Poli, J.-P., "A motivating scenario for designing an extensible audio-visual description language". In CORIMEDIA’04, Sherbrooke, Canada, October 2004.

License

BSD License

For Flicks software

Copyright (c) 2017-present, Facebook, Inc. All rights reserved.

Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:

 * Redistributions of source code must retain the above copyright notice, this
   list of conditions and the following disclaimer.

 * Redistributions in binary form must reproduce the above copyright notice,
   this list of conditions and the following disclaimer in the documentation
   and/or other materials provided with the distribution.

 * Neither the name Facebook nor the names of its contributors may be used to
   endorse or promote products derived from this software without specific
   prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.