Home

Awesome

riskquant

A library to assist in quantifying risk.

To install riskquant run the following command in root directory:

pip install .

Using riskquant as a library

simpleloss

The simpleloss class uses a single value for frequency, and two values for a magnitude range that are mapped to a lognormal distribution.

The inputs to simpleloss are as follows:

>> from riskquant import simpleloss
>> s = simpleloss.SimpleLoss(label="ALICE", name="Alice steals the data", frequency=0.10, low_loss=100000, high_loss=1000000)
>> s.annualized_loss()

40400.128269457266

pertloss

The pertloss class uses two values for a magnitude range that are mapped to a lognormal distribution, and four values for frequency that are used to create a Modified PERT distribution.

The inputs to pertloss are as follows:

>> from riskquant import pertloss
>> p = pertloss.PERTLoss(low_loss=10, high_loss=100, min_freq=0.1, max_freq=0.7, most_likely_freq=0.3, kurtosis=1)
>> simulate_100 = p.simulate_years(100)
>> p.summarize_loss(simulate_100)

{'minimum': 0,
 'tenth_percentile': 0,
 'mode': 0,
 'median': 1,
 'ninetieth_percentile': 2,
 'maximum': 6}

Using riskquant as a utility

bin/riskquant --file input.csv

The input.csv file should be formatted with columns

Identifier,Name,Probability,Low_loss,High_loss

The columns are defined as follows:

The range [Low_loss, High_loss] should cover the 90% "confidence interval" of losses, i.e. we are 90% confident that the loss would fall in that range. Given this range, we map to a Lognormal distribution, which allows for no negative loss values, and for a long tail of high losses (allowing for blowout losses to occur that exceed the "worst case" scenario.

Also, the Probability is mapped to a Poisson function so that the loss could actually occur more than once a year, but on average occurs at the rate given.

For example:

ALICE,"Alice steals the data",0.01,1000000,10000000
BOB,"Bob steals the data",0.10,10000000,1000000000
CHARLIE,"Charlie loses the data",0.05,5000000,50000000

When run as an executable, the CSV input is converted to a CSV with a prioritized list of loss scenarios:

BOB,Bob steals the data,"$26,600,000"
CHARLIE,Charlie loses the data,"$1,010,000"
ALICE,Alice steals the data,"$40,400"

Note that by default the output uses 3 significant digits, which is generally more than enough to capture the precision of the inputs.

By default, the executable will also generate a Loss Exceedance Curve (LEC) which is a statistical description of the combined risk due to all the loss scenarios. The curve is generated by simulating many possible years and summing the losses across all losses that occurred in that simulated year. We then ask: "What loss magnitude was exceeded in 90% of the simulated years", 80%, 70% and so on. The curve therefore shows the chance (y-axis) of exceeding some particular loss amount (x-axis) in aggregate across all the scenarios.

Command line arguments

Required argument:

--file : CSV of scenario name and parameters

Optional argument:

-V / --version : Version number
--years <n> : number of years to simulate' [ default 100,000 ]
--sigdigs <n> : number of significant digits in output values [ default 3 ]
--plot : Generate Loss Exceedance Curve [ default true ]

Using riskquant via Docker

Here's how to build and run riskquant using Docker.

First, build the image locally:

docker build -t riskquant .

This step only needs to be done once for a given version of riskquant.

Then, assuming your inputs are in a data sub-directory, you can analyze them with riskquant using a command like:

docker container run --rm -it \
  -v "$(PWD)/data/":/data/ \
  riskquant --file /data/input.csv

When running riskquant via Docker, Docker needs to mount a local directory into the container so that riskquant can read inputs from and write outputs to that directory. This command mounts the local data directory into the container at /data. The --file option tells riskquant where to find the file when running inside the container. You can pass other options to riskquant just like normal, including --help.

Now, check the analysis results with a command like:

cat data/input_prioritized.csv

Uniqueness of identifiers

An identifier could be duplicated, for example, if we distinguish between an internal actor and an external attacker as variants of the same loss scenario, but with different (and independent) probabilities and impacts.

help(riskquant)

Help on package riskquant:

NAME
   riskquant - Risk quantification library. Import models in this package as needed.

PACKAGE CONTENTS
   multiloss
   simpleloss

FUNCTIONS
   csv_to_simpleloss(file)
       Convert a csv file with parameters to SimpleModel objects

       :arg: file = Name of CSV file to read. Each row should contain rows with
                    name, probability, low_loss, high_loss

       :returns: List of SimpleLoss objects

   main(args=None)

DATA
   NAME_VERSION = 'riskquant 1.0'
   __appname__ = 'riskquant'

VERSION
   1.0

help(riskquant.simpleloss)

    |
    |  __init__(self, label, name, p, low_loss, high_loss)
    |      Initialize self.  See help(type(self)) for accurate signature.
    |
    |  annualized_loss(self)
    |      Expected mean loss per year as scaled by the probability of occurrence
    |
    |      :returns: Scalar of expected mean loss on an annualized basis.
    |
    |  simulate_losses_one_year(self)
    |      Generate a random number of losses, and loss amount for each.
    |
    |      :returns: List of loss amounts, or empty list if no loss occurred.
    |
    |  simulate_years(self, n)
    |      Draw randomly to simulate n years of possible losses.
    |
    |      :arg: n = Number of years to simulate
    |      :returns: List of length n with loss amounts per year. Amount is 0 if no loss occurred.
    |
    |  single_loss(self)
    |      Draw a single loss amount. Not scaled by probability of occurrence.
    |
    |      :returns: Scalar value of a randomly generated single loss amount.
    |
    |  ----------------------------------------------------------------------
    |  Data descriptors defined here:
    |
    |  __dict__
    |      dictionary for instance variables (if defined)
    |
    |  __weakref__
    |      list of weak references to the object (if defined)

DATA
   lognorm = <scipy.stats._continuous_distns.lognorm_gen object>
   norm = <scipy.stats._continuous_distns.norm_gen object>

help(riskquant.multiloss)

    |  Methods defined here:
    |
    |  __init__(self, loss_list)
    |      Initialize self.  See help(type(self)) for accurate signature.
    |
    |  loss_exceedance_curve(self, n, title='Aggregated Loss Exceedance', xlim=[1000000, 10000000000], savefile=None)
    |      Generate the Loss Exceedance Curve for the list of losses. (Uses simulate_years)
    |
    |      :arg: n = Number of years to simulate and display the LEC for.
    |            [title] = An alternative title for the plot.
    |            [xlim] = An alternative lower and upper limit for the plot's x axis.
    |            [savefile] = Save a PNG version to this file location instead of displaying.
    |
    |      :returns: None. If display=False, returns the matplotlib axis array
    |                (for customization).
    |
    |  prioritized_losses(self)
    |      Generate a prioritized list of losses from the loss list.
    |
    |      :returns: List of [(name, annualized_loss), ...] in descending order of annualized_loss.
    |
    |  simulate_years(self, n)
    |      Simulate n years across all the losses in the list.
    |
    |      :arg: n = The number of years to simulate
    |
    |      :returns: List of [loss_year_1, loss_year_2, ...] where each is a sum of all
    |                losses experienced that year.
    |
    |  ----------------------------------------------------------------------
    |  Data descriptors defined here:
    |
    |  __dict__
    |      dictionary for instance variables (if defined)
    |
    |  __weakref__
    |      list of weak references to the object (if defined)