Home

Awesome

RE-Build

Build regular expressions with natural language.

Introduction

Have you ever dealt with complex regular expressions like the following one?

var ipMatch = /(?:(?:1\d\d|2[0-4]\d|25[0-5]|[1-9]\d|\d)\.){3}(?:1\d\d|2[0-4]\d|25[0-5]|[1-9]\d|\d)\b/;

Using a meaningful variable name can help, writing comments helps even more, but what's always hard to understand is what the regular expression actually does: They're left as some sort of magic trick that it's never updated because their syntax is so obscure that even the authors themselves hardly fell like facing them again. Debugging a regular expression often means rewriting it from scratch.

RE-Build's aim is to change that, converting the process of creating a regular expression to combining nice natural language expressions. The above regex would be composed as

var ipNumber = RE.group(
        RE  ("1").then.digit.then.digit
        .or ("2").then.oneOf.range("0", "4").then.digit
        .or ("25").then.oneOf.range("0", "5")
        .or .oneOf.range("1", "9").then.digit
        .or .digit
    ),

    ipMatch = RE.matching.exactly(3).group( ipNumber.then(".") )
                .then(ipNumber).then.wordBoundary.regex;

This approach is definitely more verbose, but also much clearer and less error prone.

Another module for the same purpose is VerbalExpressions, but it doesn't allow to build just any regular expression. RE-Build aims to fill that gap too.

Remember, as a general rule, that RE-Build does not care if your environment doesn't support certain RegExp features (for example, the sticky flag or extended Unicode escaping sequences), as the corresponding source code will be generated anyway. Of course, you'll get an error trying to get a RegExp object out of it.

Installation

Via npm:

npm install re-build

Via bower:

bower install re-build

The package can be loaded as a CommonJS module (node.js, io.js), as an AMD module (RequireJS, ...) or as a standalone script:

<script src="re-build.min.js"></script>

Usage

For a detailed documentation, check the reference sheet. Keep in mind that RE-Build is a tool to help building, understanding and debugging regular expressions, and does not prevent one to create incorrect results.

Basics

The core point is the RE object (or whatever variable name you assigned to it), together with the matching method:

var RE = require("re-build");
var builder = RE.matching("xyz");

The output is not, however, a regular expression, but a regular expression builder that can be extended, or used as an extension for other builders. To get the corresponding regular expression, use the regex property or the toRegExp()/valueOf() methods.

var start = RE.matching.theStart.then(builder).toRegExp(); // /^xyz/

var foo = RE.matching(builder).then.oneOrMore.digit.regex; // /xyz\d+/

As you can see, you can put additional matching blocks using the then word, which is also a function that can take arguments as blocks to add too. The arguments can be strings (which are backslash-escaped), regular expressions or RE-Build'ers, whose source property is added to the builder unescaped.

The or word has a similar meaning, but adds an alternative block to the source:

var hex = RE.matching.digit
            .or.oneOf.range("A", "F")
            .regex;  // /\d|[A-F]/

Regex builders are immutable

Regular expression builders are immutable objects, meaning that when extending a builder we get a new builder instance:

var bld1 = RE.matching.digit;
var bld2 = bld1.or.oneOf.range("A", "F");
bld1 === bld2; // => false

Special classes, aliases and escaping

RE-Build uses specific names to address common regex character classes:

NameResultNotes
digit\dfrom 0 to 9
alphaNumeric\wdigits, uppercase and lowercase letters and the underscore
whiteSpace\swhite space characters
wordBoundary\b
anyChar.universal matcher
theStart^
theEnd$
cReturn\rcarriage return
newLine\n
tab\t
vTab\vvertical tab
formFeed\f
null\0
slash\/
backslash\\
backspace\bcan be used in character sets [...] only

The first four names can be negated prefixing them with not to get the complementary meaning:

Single characters can be defined by escape sequences:

FunctionResultMeaning
ascii(n)\xhhASCII character corrisponding to n
codePoint(n)\uhhhh / \u{hhhhhh}Unicode character corrisponding to n
control(a)\caControl sequence corrisponding to the letter a

With the exception of wordBoundary, theStart and theEnd, all of the previous words can be used inside character sets (see after).

Flags

You can set the flags of the regex prefixing matching with one or more of the flagging options:

Alternatively, you can set the flags with the withFlags method of the RE object.

// The following regexes are equivalent: /[a-f]/gi
var foo = RE.globally.anyCase.matching.oneOf.range("a", "f").regex;
var bar = RE.withFlags("gi").matching.oneOf.range("a", "f").regex;

You can't change a regex builder's flags, as builders are immutable, but you can create a copy of a builder with different flags:

var foo = RE.matching.oneOrMore.alphaNumeric;  // /\w+/
var bar = RE.globally.matching(foo);           // /\w+/g

If you don't need flags set, as a shortened version you can remove the matching word:

// These are equivalent:
RE.matching("abc").then.digit;
RE("abc").then.digit;

This becomes useful when defining the content of groups, character sets or look-aheads.

Grouping

Use the group word to define a non-capturing group, and capture for a capturing group:

var amount = RE.matching("$").then.capture(
    RE.oneOrMore.digit
      .then.noneOrOne.group(".", RE.oneOrMore.digit)
).regex;
// /\$(\d+(?:\.\d+)?)/

The group and capture words are function, and the resulting groups will embrace everything passed as arguments. Just like for then and or, arguments can be strings, regular expression or other RE-Build'ers.

Backrefences for capturing groups are obtained using the reference function, passing the reference number:

var quote = RE.matching.capture( RE.oneOf("'\"") )
              .then.anyAmountOf.alphaNumeric
              .then.reference(1);
// /(['"])\w*\1/

Character sets

Character sets ([...]) are introduced by the word oneOf. Several characters can be included separated by the word and. Additionally, one can include a character interval, using the function range and giving the initial and final character of the interval.

Exclusive character sets can be obtained prefixing oneOf with the word not.

var hexColor = RE.matching("#").then.exactly(6)
                 .oneOf.digit.and.range("a", "f").and.range("A", "F");
// /#[\da-fA-F]{6}/

var hours = RE.oneOf("01").then.digit.or("2").then.oneOf.range("0", "3");
// /[01]\d|2[0-3]/

var quote = RE.matching('"').then.oneOrMore.not.oneOf('"').then('"');
// /"[^"]+"/

Quantifiers

Quantifiers can be defined prefixing the quantified block by one of these constructs:

ConstructResult
anyAmountOf*
oneOrMore+
noneOrOne?
atLeast(n){n,}
atMost(n){,n}
exactly(n){n}
between(n, m){n,m}

Quantification is smart enough to translate constructs in their most compact form (e.g., .atLeast(1) becomes +, .between(0, 1) becomes ? and so on).

Lazy quantifiers can be obtained prefixing the word lazily prior to the quantifier.

var number = RE.oneOrMore.digit; //  /\d+/

var hexnumber = RE.exactly(2).oneOf.digit.and.range("a", "f");
// /[\da-f]{2}/

var macAddress = RE.anyCase.matching(hexnumber).then.exactly(5).group(
                    RE("-").then(hexnumber)
                 );
// /[\da-f]{2}(?:-[\da-f]{2}){5}/i

var quoteAlt = RE.matching.capture(RE.oneOf("'\""))
                 .then.lazily.anyAmountOf.anyChar
                 .then.reference(1);
// /(['"]).*?\1/

Look-aheads

Look-aheads are introduced by the function followedBy (eventually prefixed by not for negative look-aheads).

var euro = RE.matching.oneOrMore.digit.followedBy("€");
// /\d+(?=€)/

var foo = RE("a").or.not.followedBy("b").then("c");
// /a|(?!b)c/

Compatibilty

Basically, every Javascript environment that supports Object.defineProperties should be fine.

Tests

The unit tests are built on top of mocha. Once the package is installed, run npm install from the package's root directory in order to locally install mocha, then npm run test to execute the tests. Open index.html with a browser to perform the tests on the client side.

If mocha is installed globally, served side tests can be run with just the command mocha from the package's root directory.

To do

License

MIT @ Massimo Artizzu 2015-2016. See LICENSE.