Awesome
Rust on the xtensa architecture
⚠️ NOTE: This repo is now obsolete, there is now a quickstart repo for bare-metal and a template for using the standard library.
Need help? Join the esp-rs room on matrix, https://matrix.to/#/#esp-rs:matrix.org.
Supported chips
name | arch | rust-target | custom compiler required |
---|---|---|---|
esp32 | Xtensa | xtensa-esp32-none-elf | yes |
esp8266 | Xtensa | xtensa-esp8266-none-elf | yes |
Installing the compiler
For Xtensa targets a forked compiler must be installed, follow the instructions from the book.
Installing tools
Currently the xtensa targets do not have LLD support. Therefore the GCC toolchain is required for linking.
xtensa-esp32-elf toolchain for esp32 development
Instructions can be found on Espressif's web site and the latest tool toolchain can be downloaded from here.
Extract it to the directory of your choice. Then add the toolchain's bin/ directory to your $PATH
. For example:
$ mkdir ~/esp
$ tar -xzf ~/Downloads/xtensa-esp32-elf-gcc8_4_0-esp-2020r3-linux-amd64.tar.gz -C ~/esp
$ PATH="$PATH:$HOME/esp/xtensa-esp32-elf/bin"
Old instructions can be found on Espressif's web site.
xtensa-lx106-elf toolchain for esp8266 development
Install the xtensa-lx106-elf toolchain from the espressif web site.
$ mkdir ~/esp
$ tar -xzf ~/Downloads/xtensa-lx106-elf-linux64-1.22.0-100-ge567ec7-5.2.0.tar.gz -C ~/esp
$ PATH="$PATH:$HOME/esp/xtensa-lx106-elf/bin"
Cargo Build
Since the introduction of the build-std
feature of cargo, it is possible to build core
without any additional tools.
Flashing
Install espflash:
$ cargo install cargo-espflash
Example for the ESP32, remember to use target = xtensa-esp32-none-elf
inside .cargo/config
:
$ cargo espflash --chip esp32 --example esp32 --speed 460800 --features="xtensa-lx-rt/lx6,xtensa-lx/lx6,esp32-hal" /dev/ttyUSB0
Example for the ESP8266, remember to use target = xtensa-esp8266-none-elf
inside .cargo/config
:
$ cargo espflash --chip esp8266 --example esp8266 --features="xtensa-lx-rt/lx106 xtensa-lx/lx106 esp8266-hal" /dev/ttyUSB0
esptool
The preferred method of flashing is to use
cargo-espflash
, but you can use Espressif's esptool.py
to flash the binaries manually. Esptool is python-based command line tool for flashing Espressif's chips. Full installation instructions are available on the website.
License
Licensed under either of
- Apache License, Version 2.0 (LICENSE-APACHE or http://www.apache.org/licenses/LICENSE-2.0)
- MIT license (LICENSE-MIT or http://opensource.org/licenses/MIT)
at your option.
Contribution
Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.