Home

Awesome

betafpv-f3

Board Support Crate for the BetaFPV F3 Drone Flight Controller

What works

TODO

Use

To build the led-control example and flash it onto a BetaFPV F3 board, first plug the board into your computer while holding down the BOOT button to enable bootloader mode, then run the following command:

    ./flash-example led-control

License

Licensed under either of

at your option.

Contribution

Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.