Awesome

ESP8266 Smartwatch

Pictures / Videos

YouTube Videos

• Building the watch
• Minetest controller
• Compass test

Hardware

Specifications

• ESP8266 with 32Mbit of flash memory
• MPU-9250 gyroscope, accelerometer with integrated AK8963 magnetometer
• RV-3029-C2 Real Time Clock
• FT232RQ for USB communication
• SSD1306 OLED Display, 128x64
• 3 Hardware Buttons
• MCP73831 LiPo charger
• 250mAh LiPo battery
• Dimensions: 35 * 39 * 11mm
• WiFi with chip antenna
• Vibration Motor

See board/v1/README.md for a detailed parts list.

Software

The firmwares in firmwares use the esp-open-sdk. You may need to customize the main.c files to reflect your WiFi configuration. This is mainly a hardware project and not a software project, so the firmwares are primarily meant to be demos for the hardware features of the watch. Firmwares can be uploaded using esptool and debugging is possible with a serial port terminal like espterm.

Attribution

• libesphttpd (used in the minetest firmware) was written by Spritetm and contributors and is licensed under "THE BEER-WARE LICENSE".
• httpclient.c / httpclient.h (included in all firmwares) was written by Caerbannog and contributors and is licensed under "THE BEER-WARE LICENSE".
• i2c_master.h / i2c_master.c was written by Espressif Systems

License

The hardware design (schematic, PCB design, footprints, ...) is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC-BY-NC-SA).

The firmware source code is licensed under the MIT License.