Home

Awesome

scriptorium

A utility for managing the scripts in Jamf Pro. It provides backup, change tracking, and an easier edit process.

The system comprises two git repos in two local directories that should echo the scripts in your Jamf Pro server. One git repo stores the entire record from the server in XML format and the other stores the actual script as text. The script has the same name in all three spots.

With the system installed you can make changes to the scripts in the text directory and use the tools in the system to keep the three in sync.

The basic structure is scriptorium <command> some with required parameters and command options.

There is a #scriptorium channel on the MacAdmins Slack. Hit me up there if you want some help setting up. Raise an issue here if you find a bug or want a particular improvement.

See Docker and Poetry sections for container and virtual environment usage.

Note: Bug reports and change suggestions gratefully accepted

Commands

<!--@Honestpuck this appears to be the formatting you're looking for above: ``` add used to add a script to the system. commit `git commit` in both directories. delete remove a script in all three spots down pulls all scripts from the server git asks for a string and runs it as a git command in both directories list lists all scripts on the JP server push `git push` in both directories rename rename a script in all three spots up uploads all changes and additions to the server verify verify text against XML against Jamf server ``` -->

Install

scriptorium requires the requests and inquirer libraries. They can be installed by running pip3 install requests and pip3 install inquirer.

Now pull down a copy of this repo so you can keep it up to date easily. git clone git@github.com:Honestpuck/scriptorium.git will do the trick.

At this point you need to create the repositories, text and xml in your git store. Create them as empty (and private if you are using a public repo store such as Github).

Now create a directory scripts on your computer, cd into it and perform a git clone to pull down both repositories. Git will tell you you just pulled blank repositories.

Set the variables at the top of scriptorium to point to the two directories and the location of the prefs file containing the JSS location, user and password. The script assumes it is in the same format as the jss_importer prefs in the AutoPkg prefs file. Here is the minimum required plist:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>API_PASSWORD</key>
	<string>password</string>
	<key>API_USERNAME</key>
	<string>account</string>
	<key>JSS_URL</key>
	<string>https://example.jamfcloud.com</string>
</dict>
</plist>

You can create it or add it to your existing AutoPkg preference file with:

defaults write com.github.autopkg.plist API_PASSWORD 'password'
defaults write com.github.autopkg.plist API_USERNAME 'account'
defaults write com.github.autopkg.plist JSS_URL 'https://example.jamfcloud.com'

You can find the spot to set the variables in scriptorium, it looks like:

# where we stash the XML files
xml_dir = f"{cwd}/config/xml"

# where we stash the text files
txt_dir = f"{cwd}/config/text"

# prefs file
if platform.system() == "Darwin":
    prefs_file = Path(f"{home}/Library/Preferences/com.github.autopkg.stage.plist")
elif platform.system() == "linux" or platform.system() == "linux2":
    prefs_file = Path(f"{cwd}/config/com.github.autopkg.stage.plist")

Link scriptorium into somewhere in your path like /usr/local/bin, personally I have a bin directory in my home directory just for tools like this.

Now run scriptorium down and all the scripts will be populated on your Mac. Now send them to the upstream repositories with scriptorium commit --message "First commit" --push. You are now at point where you can use the system.

The other important command is add. So that you can keep everything in sync when you want to add a new script to the system you use scriptorium add and the script will spring into existence in all three places. It will be as good as empty, it's contents are set to # <name> where <name> is the name you have given it.

The file _scriptorium is a bash command completion for scriptorium. See https://github.com/Honestpuck/apple_complete for instructions on how to install it for your shell.

Work practices

The delete and rename commands do a commit by default at the moment. The problem in doing a commit is that the up command relies on changed files not being committed until after up.

The best way of solving this dilemma would be for all commits to be preceded by an up command within scriptorium. Since remove, rename and add already modify the server this problem is only triggered when you edit a script so this seems acceptable and has been implemented.

You have to run the system from the directory that holds the text files. If you do that in a shell that has a git add on you can have the prompt give you useful information. It also means you can use file name completion when you need to specify a file. I also have Visual Studio Code open to the same folder, adding the "GitLens" extension to VS Code gives you good feedback on when various changes were made to your script.

Adding a script

The process of adding a script starts with running scriptorium add. I usually put -d so that the system doesn't do a commit so I can edit the script before it goes into Jam Pro. After the add completes I can edit the stub in my editor and when ready for final testing run scriptorium commit -m "First commit for script something.sh" --push. That propagates the new script through the system.

Editing a script

Editing a script just means opening it in your editor of choice. Once you've made your changes and saved them in your editor the process is almost identical to adding a script. Run scriptorium commit -m "Fixed widgets in script acme.sh" --push

Still to be done

On the roadmap is a command modify which will modify the aspects of the script record in Jamf that aren't the actual script such as notes and parameters.

Some notes on best practices and work methods should also appear at some point. Contributions to these would be greatly appreciated.

Modification of the script to produce another to handle extension attributes instead of scripts is in the planning stages.

Suggestions

Suggestions for changes or extensions are always appreciated.

Command Descriptions

add

usage: scriptorium add [-h] [-f FILENAME] [-c CATEGORY] [-n NOTES] [-p | -d] [-m MESSAGE] 
                       [-a | -b | -r] [-z]

optional arguments:
  -h, --help            show this help message and exit
  -f FILENAME, --filename FILENAME
                        name of new script
  -c CATEGORY, --category CATEGORY
                        category of script
  -n NOTES, --notes NOTES
                        note about script
  -p, --push            do a git push after commit
  -d, --dont-commit     don't do a commit
  -m MESSAGE, --message MESSAGE
                        set commit message
  -a, --after           run script with priority 'after'
  -b, --before          run script with priority 'before'
  -r, --reboot          run script at reboot
  -z, --zero            zero parameters for script

Add goes through the process of adding a script in all the required spots. You end up with an almost empty script in the scripts folder, an XML file with all the bits filled in and uploaded to the server.

If you don't specify something on the command line you will be prompted for it.

You will also be prompted for the 4th to 11th parameters if you don't specify zero. When you are prompted for parameters entering a blank will stop the process.

By default it will do a commit but not a push.

If you allow a commit and don't specify a commit message it will be the name of the new file.

commit

usage: scriptorium commit [-h] [-p] [-m MESSAGE]

optional arguments:
  -h, --help            show this help message and exit
  -p, --push            do a git push after commit
  -m MESSAGE, --message MESSAGE
                        set commit message

If you've made a number of changes with --dont-commit then you are going to want to perform a commit eventually. This does an up and git add * before the actual commit.

delete

usage: scriptorium delete [-h] [-p | -d] [-m MESSAGE] name

positional arguments:
  name                  name of script to remove

optional arguments:
  -h, --help            show this help message and exit
  -p, --push            do a git push after commit
  -d, --dont-commit     don't do a commit
  -m MESSAGE, --message MESSAGE
                        set commit message

Deletes a script from both directories and Jamf

down

usage: scriptorium down [-h] [-n] [-p | -d] [-m MESSAGE]

optional arguments:
  -h, --help            show this help message and exit
  -n, --no-force        don't force overwrite of existing script or XML file
  -s SCRIPT, --script SCRIPT download just one script

This downloads all the scripts from the JPC server copying over the current contents.

git

usage: scriptorium git [-h] [-c COMMAND]

optional arguments:
  -h, --help  show this help message and exit
  -c, --command quoted string containing git command

The git command will ask for a string and run it as a git command in both directories. The string is split using shlex, a library that splits the string into command "words" honouring any quoted strings and leaving the quotes in the "word". An example, the string 'this that "and that"' will split into ['this', 'that', '"and that"']. You don't need to include the git at the front, scriptorium will add it for you.

list

usage: scriptorium list [-h]

optional arguments:
  -h, --help  show this help message and exit

It's simple, no arguments. Just lists the scripts on the server.

push

usage: scriptorium push [-h]

optional arguments:
  -h, --help  show this help message and exit

If you make a number of commits without a --push then you will need to do it eventually. This does it in both directories at once.

rename

usage: scriptorium rename [-h] [-p | -d] [-m MESSAGE] src dst

positional arguments:
  src                   current name of script
  dst                   new name of script

optional arguments:
  -h, --help            show this help message and exit
  -p, --push            do a git push after commit
  -d, --dont-commit     don't do a commit
  -m MESSAGE, --message MESSAGE
                        set commit message

up

usage: scriptorium up [-h]

optional arguments:
  -h, --help  show this help message and exit

Uploads all changes and additions to the server. Behind scenes it does a git diff in the scripts directory to get a list of changes then updates those scripts in the XMl files and uploads them. This means it must be done before any commits, which is why scriptorium commit does an up before the requested commit.

verify

optional arguments:
  -h, --help            show this help message and exit
  -d, --diff            print diff when checking every script
  -q, --quick           Just check lists not actual text
  -s SCRIPT, --script SCRIPT
                        specify a single script to check

Verify does a compare of the two directories and the server. The quick option just lists the files in each location and compares the lists. If they are different it prints a diff. If you don't specify --quick then the actual text is compared. The normal form just prints a short message if they differ. With --diff a diff is printed, this can quickly become quite large. You can specify a single script to verify with -s.

Poetry

Poetry covers three common Python hurdles: dependencies, virtual environments (venv), and packaging.

For scriptorium's use case, it generates the venv and requirements.txt, respectively.

Usage

# Install
curl -sSL https://install.python-poetry.org | $(which python3) -

# Change config
poetry config virtualenvs.in-project true           # .venv in `pwd`

# Activate virtual environment (venv)
poetry shell

# Deactivate venv
exit  # ctrl-d

# Install multiple libraries
poetry add requests inquirer

# Initialize existing project
poetry init

# Run script and exit environment
poetry run scriptorium

# Install from requirements.txt
poetry add `cat requirements.txt`

# Update dependencies
poetry update

# Remove library
poetry remove icecream

# Generate requirements.txt
poetry export -f requirements.txt --output requirements.txt --without-hashes

Alternative to Poetry

It's possible to create a venv and requirements.txt file with built-in Python and pip.

# create a virtual environment via python
python3 -m venv .venv

# activate virtual environment
source .venv/bin/activate

# install dependencies
python3 -m pip install requests inquirer

# generate requirements.txt
python3 -m pip freeze > requirements.txt

# exit virtual environment
deactivate

Docker

As mentioned in the MacAdmins Slack, this section adds experimental Docker support to the scriptorium script.

Please feel free to reach out via DM @pythoninthegrass.

Setup

Teardown

Usage

docker-compose run

Interactive shell

Further Reading

Basic usage | Documentation | Poetry - Python dependency management and packaging made easy

venv — Creation of virtual environments — Python 3.7.2 documentation

pip freeze - pip documentation v22.0.3

Orientation and setup | Docker Documentation

Creating the Perfect Python Dockerfile | by Luis Sena | Medium

Dockerfile: ENTRYPOINT vs CMD - CenturyLink Cloud Developer Center

Interactive shell using Docker Compose - Stack Overflow