Home

Awesome

Description

de4dot is an open source (GPLv3) .NET deobfuscator and unpacker written in C#. It will try its best to restore a packed and obfuscated assembly to almost the original assembly. Most of the obfuscation can be completely restored (eg. string encryption), but symbol renaming is impossible to restore since the original names aren't (usually) part of the obfuscated assembly.

It uses dnlib to read and write assemblies so make sure you get it or it won't compile.

Binaries

Get binaries from the build server .

It's FREE but there's NO SUPPORT

There's no support. Don't email me if you can't use it or if it fails to deobfuscate a file obfuscated with an updated obfuscator.

Instead, try to update de4dot yourself. It's a lot easier than you think. If you can't, search the Internet and you should find a couple of forums where you can ask your question.

Features

Here's a pseudo random list of the things it will do depending on what obfuscator was used to obfuscate an assembly:

Supported obfuscators/packers

Some of the above obfuscators are rarely used (eg. Goliath.NET), so they have had much less testing. Help me out by reporting bugs or problems you find.

Warning

Sometimes the obfuscated assembly and all its dependencies are loaded into memory for execution. Use a safe sandbox environment if you suspect the assembly or assemblies to be malware.

Even if the current version of de4dot doesn't load a certain assembly into memory for execution, a future version might.

How to use de4dot

N00b users

Drag and drop the file(s) onto de4dot.exe and wait a few seconds.

Deobfuscate more than one file at a time

When more than one assembly has been obfuscated, it's very likely that you must deobfuscate them all at the same time unless you disable symbol renaming. The reason is that if assembly A has a reference to class C in assembly B, and you rename symbols only in assembly B, then class C could be renamed to eg. Class0 but the reference in assembly A still references a class called C in assembly B. If you deobfuscate both assemblies at the same time, all references will also be updated.

Find all obfuscated files and deobfuscate them

The following command line will deobfuscate all assemblies that have been obfuscated by a supported obfuscator and save the assemblies to c:\output

de4dot -r c:\input -ru -ro c:\output

-r means recursive search. -ru means it should ignore unknown files. -ro means it should place the output files in the following directory. Typically, you'd first copy c:\input to c:\output, and then run the command. That way all the files will be in c:\output, even non-assemblies and non-processed assemblies. When de4dot is finished, you'd just double click the main assembly in c:\output and it should hopefully start.

Detect obfuscator

Use the -d option to detect the obfuscator without deobfuscating any assembly.

Find all .NET assemblies and detect obfuscator. If it's an unsupported obfuscator or if it's not obfuscated, it will print "Unknown obfuscator".

de4dot -d -r c:\input

Same as above except that it will only show which files have been obfuscated by a supported obfuscator.

de4dot -d -r c:\input -ru

Detect obfuscator

de4dot -d file1.dll file2.dll file3.dll

Preserving metadata tokens

Sometimes in rare cases, you'd want to preserve the metadata tokens. Use --preserve-tokens or --preserve-table. Also consider using --keep-types since it won't remove any types and methods added by the obfuscator. Another useful option is --dont-create-params. If used, the renamer won't create Param rows for method parameters that don't have a Param row. That way the ParamPtr table won't be added to your assemblies. Peverify has a bug and doesn't support it (you'll see lots of "errors").

The #Strings, #US and #Blob heaps can also be preserved by using --preserve-strings, --preserve-us, and --preserve-blob respectively. Of these three, --preserve-us is the most useful one since ldstr instruction and module.ResolveString() directly reference the #US heap.

--preserve-sig-data should be used if the obfuscator adds extra data at the end of signatures that it uses for its own purpose, eg. as decryption keys. Confuser is one obfuscator that does this.

--preserve-tokens preserves all important tokens but will also enable --preserve-us, --preserve-blob and --preserve-sig-data.

If it's detected as an unknown (unsupported) obfuscator (or if you force it with -p un), all tokens are preserved, including the #US heap and any extra data at the end of signatures. Also, no obfuscator types, fields or methods are removed.

Preserve all important tokens, #US, #Blob, extra sig data.

de4dot --preserve-tokens file1.dll

Preserve all important tokens, #US, #Blob, extra sig data and don't remove types/fields added by the obfuscator

de4dot --keep-types --preserve-tokens file1.dll

Preserve all important tokens, #US, #Blob, extra sig data and don't create extra Param rows to prevent the ParamPtr table from being created.

de4dot --dont-create-params --preserve-tokens file1.dll

Preserve all important tokens except the Param tokens.

de4dot --preserve-table all,-pd file1.dll

Dynamically decrypting strings

Although de4dot supports a lot of obfuscators, there's still some it doesn't support. To decrypt strings, you'll first need to figure out which method or methods decrypt strings. To get the method token of these string decrypters, you can use ILDASM with the 'show metadata tokens' option enabled. A method token is a 32-bit number and begins with 06, eg. 06012345.

This command will load assembly file1.dll into memory by calling Assembly.Load(). When it detects calls to the two string decrypters (06012345 and 060ABCDE), it will call them by creating a dynamic method, and save the result (the decrypted string). The call to the string decrypter will be removed and the decrypted string will be in its place.

de4dot file1.dll --strtyp delegate --strtok 06012345 --strtok 060ABCDE

Since the assembly is loaded and executed, make sure you run this in a sandbox if you suspect the file to be malware.

Forcing detection of a certain obfuscator

de4dot isn't perfect. If it fails to detect an obfuscator, you can use the -p option to force it to assume it's been obfuscated by it.

Force SmartAssembly

de4dot file1.dll -p sa

Force unsupported obfuscator

de4dot file1.dll -p un

For other obfuscator types, see the help screen.

Disabling symbol renaming

Renaming symbols isn't as easy as renaming A to B when reflection is involved. de4dot currently doesn't support renaming XAML so if you suspect that it uses WPF (or if it's a Silverlight app) you should disable renaming if the assembly fails to run.

de4dot --dont-rename file1.dll file2.dll

--keep-names can also be used to tell de4dot not to rename certain symbols, eg. "don't rename fields".

Rename everything that should be renamed except properties, events and methods.

de4dot --keep-names pem file1.dll

Using a different rename regex

The default regexes should be enough, except possibly the one that is used when an unsupported obfuscator is detected. To see all default regexes, start de4dot without any arguments and it will list all options and all default values.

Eg., currently the following is the default regex used when Dotfuscator is detected

!^[a-z][a-z0-9]{0,2}$&!^A_[0-9]+$&^[\u2E80-\u9FFFa-zA-Z_<{$][\u2E80-\u9FFFa-zA-Z_0-9<>{}$.`-]*$

As you can see, it's not just one regex, it's more than one. Each one is separated by & and each regex can be negated by using ! in front of it. To show it more clearly, these regexes are used:

(negated) ^[a-z][a-z0-9]{0,2}$
(negated) ^A_[0-9]+$
^[\u2E80-\u9FFFa-zA-Z_<{$][\u2E80-\u9FFFa-zA-Z_0-9<>{}$.`-]*$

To change the regex(es), you must know the short type name of the obfuscator (see help screen). Eg. it's sa if it's SmartAssembly, and un if it's an unsupported/unknown obfuscator. The option to use is --TYPE-name (eg. --sa-name for SmartAssembly and --un-name for unknown/unsupported obfuscators):

de4dot --un-name "^[a-zA-Z]\w*$" file1.dll

Other options

Start de4dot without any arguments and it will show all options.